This is an old revision of the document!


Emulation of RC2014 512K RAM/ROM Board

The original RC2014 512K RAM/ROM board has 32 banks of RAM and 32 banks of ROM; each bank is 16KB in size. This modification of FRR512K emulate RC2014's 512K RAM/ROM board.

www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_frr512k_rev0_frr512k_r0_comp_for_32x16kbanks.jpg

www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_frr512k_rev0_frr512k_r0_solder_wired_for_32x16kbanks.jpg

CPLD design file

Engineering Changes to Rev0 PCB

www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_frr512k_rev0_frr512k_r0_comp_mod_for_32x16kbanks.jpg

www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_frr512k_rev0_frr512k_r0_solder_mod_for_32x16kbanks.jpg

  • On the component side of rev0 PCB, cut trace to pin 19 of CPLD
  • On the solder side of rev0 PCB, cut trace from nM1 of RC2014 connector
  • On the solder side of rev0 PCB, cut trace from A14 of RC2014 connector
builderpages/plasmo/frr512k/rev0/emulate_512kram_rom.1669785153.txt.gz · Last modified: 2022/11/30 00:12 by plasmo
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0