Differences

This shows you the differences between two versions of the page.

--- boards:sbc:tiny68k:tiny68k_rev2 [2017/12/21 10:58]
plasmo
+++ boards:sbc:tiny68k:tiny68k_rev2 [2017/12/21 11:43] (current)
plasmo
@@ Line 17: / Line 17: @@
 ===== Rev 2 Design Files =====
-{{:boards:sbc:tiny68k:tiny68k_rev2:tiny68k_scm_rev2.pdf|schematic}}
+{{:boards:sbc:tiny68k:tiny68k_rev2:tiny68k_scm_rev2.pdf|schematic, }}  the schematic and board layout tools are IVEX's WinBoard and WinDraft (ver 2.05)
 gerber {{:boards:sbc:tiny68k:tiny68k_rev2:tiny68k_r2.zip|photo plots}}, pc boards were manufactured by SeeedStudio
@@ Line 23: / Line 23: @@
 Part list
-Altera EPM7128 files
+Altera EPM7128 {{:boards:sbc:tiny68k:tiny68k_rev2:rtc_en_0_wait.zip|design files}}. Designs are created in Quartus 8.1, should be compatible with later version of Quartus. Designs are entirely in schematics. {{:boards:sbc:tiny68k:tiny68k_rev2:tiny68k_cpld_rtc_en_0_wait.pdf|Schematic}}  in PDF format. {{:boards:sbc:tiny68k:tiny68k_rev2:tiny68k_cpld_program_binary.zip|Programming binary}}  in .pof format.
-Monitor
+Tiny68K {{:boards:sbc:tiny68k:tiny68k_rev2:t68kbug_r07.zip|Monitor debugger}}. The software is developed in the EASy68K tool chain. File with .bin extension is the programming binary for serial EEPROM programmer (CH341).
 ===== Board build procedures =====