Differences

This shows you the differences between two versions of the page.

--- boards:sbc:6x0x-atx-6u:start [2015/10/27 03:18]
admin
+++ boards:sbc:6x0x-atx-6u:start [2015/10/31 16:27]
admin
@@ Line 1: / Line 1: @@
-====== Introduction ======
+====== 6x0x-ATX-6U Introduction ======
-The ECB 6x0x-ATX/6U (VME) board is a single board computer supporting the Motorola 6809, 6802, and MOS Technologly 6502, all at 2 Mhz . In addition to the processor, ROM, and RAM, this board includes all peripherals required for stand-alone operation including serial, parallel, Propeller-driven video output/keyboard input, and SD card storage. The board layout supports mounting in a standard ATX case and use of a standard ATX power supply connection, as well as attachment to other N8VEM peripheral cards via an ECB connector, in which case the board can fit in a 6U/VME chassis. Prototype testing has been completed and a first run of production Revision 2.00-013 boards are currently in fabrication.
+The ECB 6x0x-ATX-6U (VME) board is a single board computer supporting the Motorola 6809, 6802, and MOS Technologly 6502, all at 2 Mhz . In addition to the processor, ROM, and RAM, this board includes all peripherals required for stand-alone operation including serial, parallel, Propeller-driven video output/keyboard input, and SD card storage. The board layout supports mounting in a standard ATX case and use of a standard ATX power supply connection, as well as attachment to other N8VEM peripheral cards via an ECB connector, in which case the board can fit in a 6U/VME chassis. Prototype testing has been completed and a first run of production Revision 2.00-013 boards are currently in fabrication.
 This board is intended as a replacement for the previous set of 3 N8VEM 6x9x Host Processor, IO Mezzanine, and Bus Bridge cards with a single comprehensive design.
@@ Line 7: / Line 7: @@
 ===== Pictures =====
-==== Completed Production Board (6502 / DOS/65 Configuration) ====
+==== Completed Production Board (6502/DOS/65 Configuration) ====
-{{:sbc:6x0x-atx-6u:6502dos65-jumpers.jpg?640}}
+{{boards:sbc:6x0x-atx-6u:6502dos65-jumpers.jpg?640}}
-==== Completed Production Board (6809 / Flex9 Configuration) ====
+==== Completed Production Board (6809/Flex9 Configuration) ====
-{{:sbc:6x0x-atx-6u:6809flex9-jumpers.jpg?640}}
+{{boards:sbc:6x0x-atx-6u:6809flex9-jumpers.jpg?640}}
 ==== Production PCB Revision 2.00-013 Front Solder Mask ====
-{{:sbc:6x0x-atx-6u:6x0x-6u-013-frontsoldermask.jpg?640}}
+{{boards:sbc:6x0x-atx-6u:6x0x-6u-013-frontsoldermask.jpg?640}}
 ====== Specifications ======
@@ Line 55: / Line 55: @@
 ==== Production PCB Revision 2.00-013 ====
-{{:sbc:6x0x-atx-6u:printing_ecb_6x0x-6u-013-sch.pdf|Schematics Revision 2.00-013}}
+{{boards:sbc:6x0x-atx-6u:printing_ecb_6x0x-6u-013-sch.pdf|Schematics Revision 2.00-013}}
-{{:sbc:6x0x-atx-6u:printing_ecb_6x0x-6u-013-sch.pdf|Board Layer Plots Revision 2.00-013}}
+{{boards:sbc:6x0x-atx-6u:printing_ecb_6x0x-6u-013-sch.pdf|Board Layer Plots Revision 2.00-013}}
 ===== Memory Management Unit =====
-For a detailed description of the Memory Management Unit operation, see [[http://n8vem-sbc.pbworks.com/w/file/70362853/Colossus.pdf|Colossus.pdf]]
+For a detailed description of the Memory Management Unit operation, see {{boards:sbc:6x0x-atx-6u:colossus.pdf|Collossus.pdf}}
 ===== Input/Output Ports =====
@@ Line 263: / Line 262: @@
 ===== 6502 CPU =====
-[[http://n8vem-sbc.pbworks.com/w/file/73686950/DOS65-6x0x(Colossus)-QUICKSTART.zip|DOS65-6x0x(Colossus)-QUICKSTART.zip]] - A distribution of the DOS/65 operating system and associated Propeller firmware for the 6x0x-ATX/6U board configured with the 6502 CPU. Note that there are two versions of the Propeller firmware, "ParPortPropFullColor.eeprom" is a full-color terminal using a 1280×1024 tile driver; "ParPortPropOriginal.eeprom" is an alternate version for older monitors using a different Propeller drive. (Updated July 27 2014)
+{{boards:sbc:6x0x-atx-6u:dos65-6x0x_colossus_-quickstart.zip|}} - A distribution of the DOS/65 operating system and associated Propeller firmware for the 6x0x-ATX/6U board configured with the 6502 CPU. Note that there are two versions of the Propeller firmware, "ParPortPropFullColor.eeprom" is a full-color terminal using a 1280×1024 tile driver; "ParPortPropOriginal.eeprom" is an alternate version for older monitors using a different Propeller drive. (Updated July 27 2014)
-[[http://n8vem-sbc.pbworks.com/w/file/83392051/DOS65-072714.zip|DOS65-072714.zip]] - This packages contains the sources, build scripts, etc for the distribution above. (Updated July 27 2014)
+{{boards:sbc:6x0x-atx-6u:dos65-072714.zip|}} - This packages contains the sources, build scripts, etc for the distribution above. (Updated July 27 2014)
 ===== 6809 CPU =====
-[[http://n8vem-sbc.pbworks.com/w/file/83394157/6x0x_flex9_27072014.zip|6x0x_flex9_27072014.zip]] - A distribution of the Flex9 operating system for the 6x0x-ATX/6U board configured with the 6809 CPU. (Updated July 27 2014)
+{{boards:sbc:6x0x-atx-6u:6x0x_flex9_27072014.zip|}} - A distribution of the Flex9 operating system for the 6x0x-ATX/6U board configured with the 6809 CPU. (Updated July 27 2014)
 ====== Modifications ======
@@ Line 286: / Line 285: @@
 |06/20/2014 |2.00-013 |First run of production boards. Fabrication via PCBCART and distribution by Andrew Bingham; 65 boards in production run |
-======   ======
+====== File Listing ======
-\\
+{{filelist>:boards:sbc:6x0x-atx-6u:*.*&style=table&tableheader=1&tableshowdate=1&tableshowsize=1}}
+\\