ECB Bus Monitor Videos

Demo video RBC SBC, MICROBOARD, MINITERMINAL_CCS85 and c't 86 Floppy-Board

Start the RBC SBC with James Moxham romimage.bin Date 21.10.2008

RBC SBC the Program T5.COM is run

2008_10_25_15_17_12.avi

RBC ECB-BUS Monitor
Start my RBC SBC 2 with the romimage of the n8vem_sim_000_ajl

  Setting the Switches
  SW_HEX_3_4    0 0 0 0 0 0 0 0
  SW_HEX_1_2    0 0 0 0 0 0 0 0
  SW2           1 1 1 1 1 1 1 1
  SW1           0 0 0 0 0 0 0 0

2008_10_25_15_18_12.avi

RBC SBC 2 the Program T5.COM is running.
If entered by Keyboard take place the LED-BAR flash.

 Setting the Switches
 SW_HEX_3_4    0 0 0 0 0 0 0 0
 SW_HEX_1_2    0 0 0 0 0 0 0 0
 SW2           1 1 1 1 1 1 1 1
 SW1           0 0 0 0 0 0 0 0 

Then the Key Point press Exit to CP/M

2008_10_25_15_29_46.avi

RBC SBC 2 the Program T5.COM is running.
If entered by Keyboard take place the LED-BAR flash.
Demo-Address 124H = 0 0 0 0 0 0 0 1 0 0 1 0 0 1 0 0

  Setting the Switches
  SW_HEX_3_4    0 0 0 0 0 0 0 1
  SW_HEX_1_2    0 0 1 0 0 1 0 0
  SW2           1 1 1 1 1 1 1 1
  SW1           0 0 0 0 0 0 0 0 

Then the Key Point press Exit to CP/M

2008_10_25_15_30_33.avi

RBC SBC 2 the Program T5.COM is running.
If entered by Keyboard take place the LED-BAR flash.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_33_01.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_34_52.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_36_02.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_44_34.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 

2008_10_25_15_45_44.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_46_54.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_48_20.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_59_13.avi

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 

2008_10_25_15_59_59.avi

Start my RBC SBC 2 with the romimage of the n8vem_sim_000_ajl

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 0
SW_HEX_1_2    0 0 0 0 0 0 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 

2008_10_25_16_03_04.avi

Start my RBC SBC 2 with the romimage of the n8vem_sim_000_ajl

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 

2008_11_09_16_25_45.avi

Demo Video
RBC ECB-BUS Monitor
RESET it press
Start my RBC SBC 2 with the romimage of the n8vem_sim_000_ajl
CP/M 2.2 is running.
Program T5.COM is running.
Then the Key Point press Exit to CP/M
CP/M 2.2 is running.

2008_11_09_16_28_17.avi

CP/M 2.2 is running.
Program T5.COM is running.
Then the Key Point press
Exit to CP/M 2.2

2008_11_09_16_29_29.avi

CP/M 2.2 is running.
Program T5.COM is running.
Demo-Address 124H
Setting the Hex-Switch Address 1 2 4
Then the Key Point press Exit to CP/M
CP/M 2.2 is running

2008_11_09_16_32_54.avi

CP/M 2.2 is running.
Program T5.COM is running.
Then the Key Point press Exit to CP/M
CP/M 2.2 is running.

2008_11_09_16_34_32.avi

CP/M 2.2 is running.
The Program T5.COM is running.
Setting the SW1 1 0 0 0 0 0 0
Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

ecb_monitor_clip_.wmv

ecb_monitor_singlestep1a.wmv