ECB Bus Monitor Videos

2008_09_15_23_42_14.avi
ECB_BUS_0001.AVI
ECB_BUS_0002.AVI
2008_10_25_15_17_12.avi

2008_10_25_15_17_12.avi

RBC ECB-BUS Monitor
Start my RBC SBC 2 with the romimage of the n8vem_sim_000_ajl

  Setting the Switches
  SW_HEX_3_4    0 0 0 0 0 0 0 0
  SW_HEX_1_2    0 0 0 0 0 0 0 0
  SW2           1 1 1 1 1 1 1 1
  SW1           0 0 0 0 0 0 0 0
2008_10_25_15_18_12.avi

2008_10_25_15_18_12.avi

RBC SBC 2 the Program T5.COM is running.
If entered by Keyboard take place the LED-BAR flash.

 Setting the Switches
 SW_HEX_3_4    0 0 0 0 0 0 0 0
 SW_HEX_1_2    0 0 0 0 0 0 0 0
 SW2           1 1 1 1 1 1 1 1
 SW1           0 0 0 0 0 0 0 0 

Then the Key Point press Exit to CP/M

2008_10_25_15_29_46.avi

2008_10_25_15_29_46.avi

RBC SBC 2 the Program T5.COM is running.
If entered by Keyboard take place the LED-BAR flash.
Demo-Address 124H = 0 0 0 0 0 0 0 1 0 0 1 0 0 1 0 0

  Setting the Switches
  SW_HEX_3_4    0 0 0 0 0 0 0 1
  SW_HEX_1_2    0 0 1 0 0 1 0 0
  SW2           1 1 1 1 1 1 1 1
  SW1           0 0 0 0 0 0 0 0 

Then the Key Point press Exit to CP/M

2008_10_25_15_30_33.avi

2008_10_25_15_30_33.avi

RBC SBC 2 the Program T5.COM is running.
If entered by Keyboard take place the LED-BAR flash.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 
Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_33_01.avi

2008_10_25_15_33_01.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_34_52.avi

2008_10_25_15_34_52.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_36_02.avi

2008_10_25_15_36_02.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_44_34.avi

2008_10_25_15_44_34.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 
Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 
2008_10_25_15_45_44.avi

2008_10_25_15_45_44.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 
Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_46_54.avi

2008_10_25_15_46_54.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_48_20.avi

2008_10_25_15_48_20.avi

RBC SBC 2 the Program T5.COM is running.

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 
Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           1 0 0 0 0 0 0 0 

Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

2008_10_25_15_59_13.avie

2008_10_25_15_59_13.avi

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 
2008_10_25_15_59_59.avi

2008_10_25_15_59_59.avi

Start my RBC SBC 2 with the romimage of the n8vem_sim_000_ajl

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 0
SW_HEX_1_2    0 0 0 0 0 0 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 
2008_10_25_16_03_04.avi

2008_10_25_16_03_04.avi

Start my RBC SBC 2 with the romimage of the n8vem_sim_000_ajl

Setting the Switches
SW_HEX_3_4    0 0 0 0 0 0 0 1
SW_HEX_1_2    0 0 1 0 0 1 0 0
SW2           1 1 1 1 1 1 1 1
SW1           0 0 0 0 0 0 0 0 
2008_11_09_16_25_45.avi

2008_11_09_16_25_45.avi

Demo Video
RBC ECB-BUS Monitor
RESET it press
Start my RBC SBC 2 with the romimage of the n8vem_sim_000_ajl
CP/M 2.2 is running.
Program T5.COM is running.
Then the Key Point press Exit to CP/M
CP/M 2.2 is running.

2008_11_09_16_28_17.avi

2008_11_09_16_28_17.avi

CP/M 2.2 is running.
Program T5.COM is running.
Then the Key Point press
Exit to CP/M 2.2

2008_11_09_16_29_29.avi

2008_11_09_16_29_29.avi

CP/M 2.2 is running.
Program T5.COM is running.
Demo-Address 124H
Setting the Hex-Switch Address 1 2 4
Then the Key Point press Exit to CP/M
CP/M 2.2 is running

2008_11_09_16_32_54.avi

2008_11_09_16_32_54.avi

CP/M 2.2 is running.
Program T5.COM is running.
Then the Key Point press Exit to CP/M
CP/M 2.2 is running.

2008_11_09_16_34_32.avi

2008_11_09_16_34_32.avi

CP/M 2.2 is running.
The Program T5.COM is running.
Setting the SW1 1 0 0 0 0 0 0
Single Steps
Then the Key Point press
Single Steps
At then end of Single Steps it Exit to CP/M

cb_monitor_clip_.wmv
ecb_monitor_singlestep1a.wmv

File List

FilenameFilesizeLast modified
2008_09_15_23_42_14.avi1.9 MiB2015/11/03 01:21
2008_10_25_15_17_12.avi391.5 KiB2015/11/03 01:21
2008_10_25_15_18_12.avi837.0 KiB2015/11/03 01:21
2008_10_25_15_29_46.avi899.5 KiB2015/11/03 01:21
2008_10_25_15_30_33.avi1.4 MiB2015/11/03 01:21
2008_10_25_15_33_01.avi830.0 KiB2015/11/03 01:21
2008_10_25_15_34_52.avi1.9 MiB2015/11/03 01:21
2008_10_25_15_36_02.avi937.0 KiB2015/11/03 01:21
2008_10_25_15_44_34.avi1.8 MiB2015/11/03 01:21
2008_10_25_15_45_44.avi1.8 MiB2015/11/03 01:21
2008_10_25_15_46_54.avi322.5 KiB2015/11/03 01:21
2008_10_25_15_48_20.avi1.5 MiB2015/11/03 01:21
2008_10_25_15_59_13.avi601.0 KiB2015/11/03 01:21
2008_10_25_15_59_59.avi390.0 KiB2015/11/03 01:21
2008_10_25_16_03_04.avi414.0 KiB2015/11/03 01:21
2008_11_09_16_25_45.avi2.5 MiB2015/11/03 01:21
2008_11_09_16_28_17.avi5.2 MiB2015/11/03 01:21
2008_11_09_16_29_29.avi9.6 MiB2015/11/03 01:21
2008_11_09_16_32_54.avi4.6 MiB2015/11/03 01:21
2008_11_09_16_34_32.avi14.0 MiB2015/11/03 01:21
ecb_bus_0001.avi2.2 MiB2015/11/03 01:20
ecb_bus_0002.avi2.3 MiB2015/11/03 01:21
ecb_monitor_clip_.wmv291.9 KiB2015/11/03 01:21
ecb_monitor_singlestep1a.wmv281.8 KiB2015/11/03 01:21
boards/ecb/bus-monitor/videos.txt · Last modified: 2016/02/27 18:54 by admin
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0