Mail Thread Index

• Date Index

• It's alive!, oh5nxo
  • Re: It's alive!, oh5nxo
    • RE: [Bulk] [N8VEM: 193] Re: It's alive!, Andrew Lynch
    • Re: It's alive!, lynchaj
  • Re: It's alive!, lynchaj
    • Re: It's alive!, Rich Camarda
      • Re: It's alive!, lynchaj
      • Re: It's alive!, oh5nxo
      • Re: It's alive!, Rich Camarda
      • RE: [N8VEM: 202] Re: It's alive!, Andrew Lynch
      • Re: It's alive!, oh5nxo
      • Re: It's alive!, Dr_Acula
      • Re: It's alive!, oh5nxo
      • Re: It's alive!, oh5nxo
      • RE: [N8VEM: 206] Re: It's alive!, Andrew Lynch
      • Re: It's alive!, oh5nxo
      • RE: [N8VEM: 215] Re: It's alive!, Jack Rubin
      • Re: It's alive!, oh5nxo
      • RE: [N8VEM: 230] Re: It's alive!, Andrew Lynch
      • Re: It's alive!, oh5nxo
      • RE: [N8VEM: 244] Re: It's alive!, Andrew Lynch
      • Re: It's alive!, oh5nxo
      • Re: It's alive!, oh5nxo
      • RE: [N8VEM: 249] Re: It's alive!, Andrew Lynch
      • RE: [N8VEM: 248] Re: It's alive!, Andrew Lynch
      • Re: It's alive!, oh5nxo
      • RE: [N8VEM: 266] Re: It's alive!, Andrew Lynch
      • Re: It's alive!, oh5nxo
      • Re: It's alive!, oh5nxo
      • RE: [N8VEM: 277] Re: It's alive!, Andrew Lynch
      • Re: It's alive!, oh5nxo
      • RE: [N8VEM: 293] Re: It's alive!, Andrew Lynch
• Re: Second batch of PCBs, James0555
  • RE: [N8VEM: 191] Re: Second batch of PCBs, Andrew Lynch
  • <Possible follow-ups>
  • Re: Second batch of PCBs, James0555
    • RE: [N8VEM: 192] Re: Second batch of PCBs, Andrew Lynch
• Step by step instructions, Dr_Acula
  • Re: Step by step instructions, lynchaj
    • Re: Step by step instructions, Dr_Acula
      • Re: Step by step instructions, Dr_Acula
      • Re: Step by step instructions, jdavis
  • Re: Step by step instructions, oh5nxo
    • Re: Step by step instructions, Dr_Acula
    • RE: [N8VEM: 214] Re: Step by step instructions, Jack Rubin
      • Re: Step by step instructions, oh5nxo
    • RE: [N8VEM: 214] Re: Step by step instructions, Andrew Lynch
• Re: CPM software, oh5nxo
  • Re: CPM software, oh5nxo
    • Re: CPM software, lynchaj
      • Re: CPM software, oh5nxo
      • Re: CPM software, Max Scane
      • Re: CPM software, oh5nxo
      • Re: CPM software, Max Scane
      • Re: CPM software, oh5nxo
      • RE: [N8VEM: 245] Re: CPM software, Andrew Lynch
• ECB backplane and other CP/M forums, lynchaj
  • Re: ECB backplane and other CP/M forums, Dr_Acula
    • Re: ECB backplane and other CP/M forums, Dr_Acula
      • Re: [N8VEM: 232] Re: ECB backplane and other CP/M forums, Jack Rubin
      • RE: [N8VEM: 233] Re: ECB backplane and other CP/M forums, Andrew Lynch
    • RE: [N8VEM: 228] Re: ECB backplane and other CP/M forums, Andrew Lynch
• View this page "N8VEM SBC Hall of Fame", lynchaj
  • <Possible follow-ups>
  • View this page "N8VEM SBC Hall of Fame", lynchaj
• Second batch PCBs ordered!, Andrew Lynch
  • Re: Second batch PCBs ordered!, Dr_Acula
    • Re: Second batch PCBs ordered!, Max Scane
      • RE: [N8VEM: 239] Re: Second batch PCBs ordered!, Andrew Lynch
    • RE: [N8VEM: 238] Re: Second batch PCBs ordered!, Andrew Lynch
  • Re: Second batch PCBs ordered!, Doug(wd0dbs)
    • Re: Second batch PCBs ordered!, lynchaj
• Re: Sockets - Group Order from Phoenix Enterprises?, jdavis
  • RE: [N8VEM: 242] Re: Sockets - Group Order from Phoenix Enterprises?, Jack Rubin
• ECB backplane -- early planning for a PCB order, lynchaj
  • RE: [N8VEM: 252] ECB backplane -- early planning for a PCB order, Jack Rubin
    • Re: ECB backplane -- early planning for a PCB order, lynchaj
  • RE: [N8VEM: 252] ECB backplane -- early planning for a PCB order, Ken Harty
  • Re: ECB backplane -- early planning for a PCB order, jdavis
  • Re: ECB backplane -- early planning for a PCB order, James0555
    • Re: ECB backplane -- early planning for a PCB order, Rich Camarda
      • Re: ECB backplane -- early planning for a PCB order, oh5nxo
  • Re: [N8VEM: 252] ECB backplane -- early planning for a PCB order, Seth Morabito
  • Re: ECB backplane -- early planning for a PCB order, Max Scane
    • Re: ECB backplane -- early planning for a PCB order, lynchaj
      • Re: ECB backplane -- early planning for a PCB order, jdavis
      • RE: [N8VEM: 274] Re: ECB backplane -- early planning for a PCB order, Andrew Lynch
      • RE: [N8VEM: 274] Re: ECB backplane -- early planning for a PCB order, Jack Rubin
      • RE: [N8VEM: 276] Re: ECB backplane -- early planning for a PCB order, Andrew Lynch
  • Re: ECB backplane -- early planning for a PCB order, RichLeary
    • Re: ECB backplane -- early planning for a PCB order, lynchaj
• more kooky peripheral ideas, here is one with a story..., lynchaj
  • Re: more kooky peripheral ideas, here is one with a story..., lynchaj
• Re: Power connector warning!, joebandit
  • Re: Power connector warning!, joebandit
    • RE: [N8VEM: 267] Re: Power connector warning!, Andrew Lynch
  • RE: [N8VEM: 263] Re: Power connector warning!, Andrew Lynch
    • Re: Power connector warning!, joebandit
      • RE: [N8VEM: 296] Re: Power connector warning!, Andrew Lynch
• IDE or rather GIDE on the SBC, joebandit
  • RE: [N8VEM: 264] IDE or rather GIDE on the SBC, Andrew Lynch
• Re: Work in progress, joebandit
  • Re: Work in progress, joebandit
    • Re: Work in progress, joebandit
      • RE: [N8VEM: 308] Re: Work in progress, Andrew Lynch
      • Re: Work in progress, joebandit
      • Re: [N8VEM: 321] Re: Work in progress, Jack Rubin
      • RE: [N8VEM: 322] Re: Work in progress, Andrew Lynch
      • RE: [N8VEM: 321] Re: Work in progress, Andrew Lynch
      • Re: Work in progress, oh5nxo
      • RE: [N8VEM: 331] Re: Work in progress, Andrew Lynch
      • RE: [N8VEM: 321] Re: Work in progress, Andrew Lynch
• Congratulations Rolf!, lynchaj
• Alive and well in Chicago, JackRubin
  • RE: [N8VEM: 281] Alive and well in Chicago, Andrew Lynch
  • RE: [N8VEM: 281] Alive and well in Chicago, Andrew Lynch
• Booted in the Bay Area, ki6fmq
  • RE: [N8VEM: 286] Booted in the Bay Area, Andrew Lynch
    • Re: Booted in the Bay Area, ki6fmq
      • RE: [N8VEM: 295] Re: Booted in the Bay Area, Andrew Lynch
• Re: N8VEM serial cable pinout, joebandit
  • RE: [N8VEM: 292] Re: N8VEM serial cable pinout, Andrew Lynch
    • Re: N8VEM serial cable pinout, joebandit
• z80 cross assembler, daveh
  • RE: [N8VEM: 294] z80 cross assembler, Andrew Lynch
    • Re: z80 cross assembler, jdavis
      • Re: z80 cross assembler, jdavis
      • Re: z80 cross assembler, joebandit
      • RE: [N8VEM: 303] Re: z80 cross assembler, Andrew Lynch
• Re: Juha's SD circuit, joebandit
  • Re: Juha's SD circuit, oh5nxo
    • RE: [N8VEM: 311] Re: Juha's SD circuit, Andrew Lynch
      • Re: Juha's SD circuit, joebandit
      • Re: Juha's SD circuit, oh5nxo
      • Re: Juha's SD circuit, oh5nxo
      • RE: [N8VEM: 333] Re: Juha's SD circuit, Andrew Lynch
      • Re: Juha's SD circuit, oh5nxo
      • RE: [N8VEM: 339] Re: Juha's SD circuit, Andrew Lynch
• DigiKey Parts List, Ken Harty
  • RE: [N8VEM: 306] DigiKey Parts List, Andrew Lynch
• No smoke, joebandit
  • Re: [N8VEM: 309] No smoke, Jack Rubin
• Redesign of ECB backplane, Andrew Lynch
• EARN MONEY $2500-10000 PER WEEK, amu
  • Re: EARN MONEY $2500-10000 PER WEEK, lynchaj
• periodic interval timer, oh5nxo
  • RE: [N8VEM: 320] periodic interval timer, Andrew Lynch
    • Re: periodic interval timer, oh5nxo
      • RE: [N8VEM: 332] Re: periodic interval timer, Andrew Lynch
      • Re: periodic interval timer, oh5nxo
• Second batch of PCBs update, Andrew Lynch
  • Re: Second batch of PCBs update, lynchaj
• ECB backplane update, Andrew Lynch
• ECB backplane, revised, lynchaj
  • RE: [N8VEM: 329] ECB backplane, revised, Jack Rubin
    • Re: ECB backplane, revised, lynchaj
      • Re: ECB backplane, revised, lynchaj
      • Re: ECB backplane, revised, lynchaj
      • Re: ECB backplane, revised, lynchaj
• ECB peripherals, lynchaj
  • Re: ECB peripherals, Max Scane
    • Re: ECB peripherals, lynchaj
• How are the SBC builds coming along?, lynchaj
  • Re: How are the SBC builds coming along?, Max Scane
    • Re: How are the SBC builds coming along?, lynchaj
      • Re: How are the SBC builds coming along?, jdavis
      • RE: [N8VEM: 358] Re: How are the SBC builds coming along?, Andrew Lynch
  • Re: How are the SBC builds coming along?, k.h...@sbcglobal.net
    • Re: How are the SBC builds coming along?, Doug(wd0dbs)
      • RE: [N8VEM: 367] Re: How are the SBC builds coming along?, Andrew Lynch
    • RE: [N8VEM: 366] Re: How are the SBC builds coming along?, Andrew Lynch
      • Re: How are the SBC builds coming along?, Max Scane
      • RE: [N8VEM: 371] Re: How are the SBC builds coming along?, Andrew Lynch
      • RE: [N8VEM: 370] Re: How are the SBC builds coming along?, Ken Harty
      • Re: How are the SBC builds coming along?, lynchaj
      • RE: [N8VEM: 375] Re: How are the SBC builds coming along?, Ken Harty
      • RE: [N8VEM: 376] Re: How are the SBC builds coming along?, Andrew Lynch
      • RE: [N8VEM: 377] Re: How are the SBC builds coming along?, Ken Harty
      • RE: [N8VEM: 378] Re: How are the SBC builds coming along?, Andrew Lynch
  • Re: How are the SBC builds coming along?, cavelamb
• Messenger Plus! Live, patrick
  • <Possible follow-ups>
  • Messenger Plus! Live, patrick
    • Re: Messenger Plus! Live, lynchaj
• ECB Bus Monitor article!, lynchaj
  • Re: ECB Bus Monitor article!, littlebus
    • Re: ECB Bus Monitor article!, lynchaj
• Help with software please, Dr_Acula
  • RE: [N8VEM: 357] Help with software please, Andrew Lynch
    • Re: [N8VEM: 357] Help with software please, Dr_Acula
• ECB backplane PCBs ordered!, lynchaj
• IM2 works without mods, oh5nxo
  • RE: [N8VEM: 365] IM2 works without mods, Andrew Lynch
    • Re: IM2 works without mods, oh5nxo
• ECB busmonitor progress, request for translation, lynchaj
  • Re: ECB busmonitor progress, request for translation, oh5nxo