Differences

This shows you the differences between two versions of the page.

--- builderpages:robg:pdp10x [2020/01/27 14:20]
robg
+++ builderpages:robg:pdp10x [2020/01/27 16:17] (current)
robg
@@ Line 54: / Line 54: @@
 The board uses a standard 5V/2A wall-wart DC power supply with
 a 5.5mmx2.1mm connector jack.
+==== Schematics and Build Files ====
+My board, schematics, layout files and code changes are made available under the [[https://creativecommons.org/licenses/by-nc-sa/4.0 | Creative Commons BY-SA-NC 4.0]] license.
+^ Item ^ File ^
+| Schematics | {{pdp10x_v01_schematic.pdf}} |
+| Manufacturing Files (Gerbers) | {{pdp10x_v01.zip}} |
+| KiCad Files | On GitLab: [[https://gitlab.com/codesmythe/pdp10x_system_board | pdp10x_system_board]] |
 ==== Acknowledgements and Licenses ====
@@ Line 68: / Line 77: @@
 Thanks to Jose Luis Collado ([[https://www.retrobrewcomputers.org/doku.php?id=builderpages:positron:start|positron]]) for his [[https://www.retrobrewcomputers.org/doku.php?id=builderpages:positron:start|work]] in porting Multicomp to the Xilinx-based Papilio Duo board. I've reused some of that work here.
-My board, schematics, layout files and code changes are made available under the [[https://creativecommons.org/licenses/by-nc-sa/4.0 | Creative Commons BY-SA-NC 4.0]] license. (If there is no license mentioned for the above works, it's because I could not find one. Please send corrections.)
+(If there is no license mentioned for the above works, it's because I could not find one. Please send corrections.)
 ==== Bill of Materials (BOM) ====