[[builderpages:robg:pdp10x]]
You are here: start » builderpages » robg » pdp10x
Show page
AdminRecent ChangesSitemap

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
builderpages:robg:pdp10x [2020/01/27 12:10]
robg 		builderpages:robg:pdp10x [2020/01/27 16:17] (current)
robg
Line 54: Line 54:
 The board uses a standard 5V/2A wall-wart DC power supply with The board uses a standard 5V/2A wall-wart DC power supply with
 a 5.5mmx2.1mm connector jack. a 5.5mmx2.1mm connector jack.
 +
 +==== Schematics and Build Files ====
 +
 +My board, schematics, layout files and code changes are made available under the [[https://creativecommons.org/licenses/by-nc-sa/4.0 | Creative Commons BY-SA-NC 4.0]] license.
 +
 +^ Item ^ File ^
 +| Schematics | {{pdp10x_v01_schematic.pdf}} |
 +| Manufacturing Files (Gerbers) | {{pdp10x_v01.zip}} |
 +| KiCad Files | On GitLab: [[https://gitlab.com/codesmythe/pdp10x_system_board | pdp10x_system_board]] |
  
 ==== Acknowledgements and Licenses ==== ==== Acknowledgements and Licenses ====
Line 68: Line 77:
 Thanks to Jose Luis Collado ([[https://www.retrobrewcomputers.org/doku.php?id=builderpages:positron:start|positron]]) for his [[https://www.retrobrewcomputers.org/doku.php?id=builderpages:positron:start|work]] in porting Multicomp to the Xilinx-based Papilio Duo board. I've reused some of that work here. Thanks to Jose Luis Collado ([[https://www.retrobrewcomputers.org/doku.php?id=builderpages:positron:start|positron]]) for his [[https://www.retrobrewcomputers.org/doku.php?id=builderpages:positron:start|work]] in porting Multicomp to the Xilinx-based Papilio Duo board. I've reused some of that work here.
  
-My board, schematics, layout files and code changes are made available under the [[https://creativecommons.org/licenses/by-nc-sa/4.0 | Creative Commons BY-SA-NC 4.0]] license. (If there is no license mentioned for the above works, it's because I could not find one. Please send corrections.)+(If there is no license mentioned for the above works, it's because I could not find one. Please send corrections.)
  
 ==== Bill of Materials (BOM) ==== ==== Bill of Materials (BOM) ====
Line 92: Line 101:
   * [Multicomp] A 1 GB or greater microSD card (SDHC).   * [Multicomp] A 1 GB or greater microSD card (SDHC).
      
-  * [PDP10X] A 256 MB or greater compact flash card, and some way to get a disk image onto the flash card.+  * [PDP-10/X] A 256 MB or greater compact flash card, and some way to get a disk image onto the flash card.
  
-  * [PDP10X] A compact flash to IDE adapter. They are available here on NewEgg.com: https://www.newegg.com/syba-sd-cf-ide-di-ide-to-compact-flash/p/N82E16822998003. Also available cheaper on eBay/AliExpress, but make sure the picture matches the NewEgg one.+  * [PDP-10/X] A compact flash to IDE adapter. They are available here on NewEgg.com: https://www.newegg.com/syba-sd-cf-ide-di-ide-to-compact-flash/p/N82E16822998003. Also available cheaper on eBay/AliExpress, but make sure the picture matches the NewEgg one.
  
-The rest of the BOM follows in this table:+The rest of the BOM is listed in the table below. Here is {{PDP10X_Mouser.txt|text file}} that you can copy & paste in to Mouser's [[https://www.mouser.com/Bom/CopyPaste|BOM tool]]. After you add the BOM to Mouser's cart, be sure to carefully review your the parts list and remove parts you already have or are getting elsewhere.
  
 ^ Reference ^ Quantity ^ Item ^ Description ^ Mouser Part No. ^ ^ Reference ^ Quantity ^ Item ^ Description ^ Mouser Part No. ^
builderpages/robg/pdp10x.1580145049.txt.gz · Last modified: 2020/01/27 12:10 by robg
Show pageOld revisions
Media ManagerBack to top
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0