I would definitely be interested.
Best,
Dylan
Hi all,Long time lurker, first time poster.I guessed as there are so many Z80 users here this would be a good question to ask what I should do with the 100 Z80s I recently acquired.They are 6MHz Toshiba CMOS Z80s in a 0.8mm SO package. My thoughts are to make a small board with a Z80, a 64KB SRAM, CPLD, a USB enabled ATMega and maybe an SD card or SPI flash. With some pins in the in same layout as a DIP Z80..The CPLD and ATMega would provide GPIO, UARTs (one over USB), glue logic and the ability to load data into the SRAM via USB or from SD Card/SPI flash. You could use it as a standalone Z80 system or plug it into a Z80 system to tinker with. Maybe have hardware breakpoints/watchpoints via the CPLD?Would anyone here be interested in such a board? I have to produce at least 10 PCBs as that's the minimum that places like seeedstudio will produce. If anyone is interested I would order enough ATMega's for everyone (I have almost everything else :)). If not I'll build up two for myself and make a 98 core Z80 super computer.Cheers,Daniel--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to n8vem+un...@googlegroups.com.
To post to this group, send email to n8...@googlegroups.com.
Visit this group at http://groups.google.com/group/n8vem?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.