[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Problem SBC V2 no puls on pin 20 Z80

To: n8vem@googlegroups.com
Subject: Re: Problem SBC V2 no puls on pin 20 Z80
From: rbruinsma <rbma...@gmail.com>
Date: Thu, 21 Feb 2013 10:10:46 -0800 (PST)
In-reply-to: <283ff3b8-67e7-4f05-8528-9d747a789016@googlegroups.com>
References: <283ff3b8-67e7-4f05-8528-9d747a789016@googlegroups.com>

WWWHHHHooooohhhhhhooooo, It's alive!!!

Two thing where wrong:

- I did not have a working Oscillator for my CPU, I did retipped the solder on the Oscillator socket to solve this problem.
- I had a faulty Z80 IC. So I bought a new Z80 IC and now my board is up & running.

Thank you all for helping me out, I am so glad my board didn't run on the first try because now I learned a lot of debugging the board.

Special thanks to Douglas, Sergey, vk5dg and Yoda

Follow-Ups:
- RE: [N8VEM: 15660] Re: Problem SBC V2 no puls on pin 20 Z80
  - From: "Andrew Lynch" <LYN...@YAHOO.COM>
- Re: [N8VEM: 15660] Problem SBC V2 no puls on pin 20 Z80
  - From: Douglas Goodall <douglas...@mac.com>

References:
- Problem SBC V2 no puls on pin 20 Z80
  - From: rbruinsma <rbma...@gmail.com>

Prev by Date: RE: [N8VEM: 15654]
Next by Date: Re: Video Card For xi 8088
Previous by thread: [no subject]
Next by thread: RE: [N8VEM: 15660] Re: Problem SBC V2 no puls on pin 20 Z80
Index(es):
- Date
- Thread