Parts List for SBC v2 gets the Jameco part number wrong. 253833
should be 334182. (5mm, 2-lead, T 1 3/4, grn/red LED)
--John
On 09/24/2012 07:04 PM, LucasFraser wrote:
So, I'm still a bit confused... Is it a single or bi
color LED? Parts list specifies a single color one but you are all
saying it is red/green?
On Tuesday, September 25, 2012 6:08:43 AM UTC+9:30, Sergey wrote:
Or
just connect the LED to a 5V through 470 ohm resistor, and check
the polarity and the colors :-)
On Sep 24, 1:10 pm, John Coffman <john...@gmail.com>
wrote:
> The leads on the LED are distinguished 1 & 2 by
length. Lead 1 is the longer lead; and lead 2 is the shorter.
> The square pad marks pin 1.
> --John
> On 09/24/2012 03:05 AM, LucasFraser wrote:
> I have the SBC V2 --
> You received this message because you are subscribed to the
Google Groups "N8VEM" group.
> To view this discussion on the web visithttps://groups.google.com/d/msg/n8vem/-/fpNcTNJTvzcJ.
> To post to this group, send email ton...@googlegroups.com.
> To unsubscribe from this group, send email ton8vem+u...@googlegroups.com.
> For more options, visit this group athttp://groups.google.com/group/n8vem?hl=en.
--
You received this message because you are subscribed to the Google
Groups "N8VEM" group.
To view this discussion on the web visit https://groups.google.com/d/msg/n8vem/-/_tXU828C3ooJ.
To post to this group, send email to n8...@googlegroups.com.
To unsubscribe from this group, send email to
n8vem+un...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/n8vem?hl=en.
|