Hi James,
I'm not able to transfer files from the PC to the Mini. The serial
cable is wired as per the schematic and i can communicate with the PC
using Hyperterminal. The only thing i can think of is that the SRAM i
have is incompatible ? Futurlec sent me 628512 SRAM instead of
684000.The only difference i see is that the data I/O pins are
slightly different (offset by -1) ie. for the 68400 the pins are I/O 1
to I/O 8 whereas the 68512 pins are I/O 0 to I/O 7. Could this be the
problem? I have'nt tried to save anything to drive A: yet but i'll try
this tonight.
Cheers,
Nik
On Nov 23, 10:49ï¿Å?pm, James Moxham <mox...@internode.on.net> wrote:
Woot!
Much jumping and rejoicing! What are your plans for the board?
Cheers, James
brizza wrote:
> Hello All,
> Attached is a photo of my New N8VEM Mini with LCD and Keyboard working
> nicely. Thanks James, for a neat little CP/M Computer !
>http://picasaweb.google.com/Brizza62/DropBox?pli=1#5407261847610654274
> Cheers,
> Nik
> --
> You received this message because you are subscribed to the Google
Groups "N8VEM" group.
> To post to this group, send email to n8...@googlegroups.com.
> To unsubscribe from this group, send email to
n8vem+un...@googlegroups.com.
> For more options, visit this group
athttp://groups.google.com/group/n8vem?hl=.
--
You received this message because you are subscribed to the Google
Groups "N8VEM" group.
To post to this group, send email to n8...@googlegroups.com.
To unsubscribe from this group, send email to
n8vem+un...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/n8vem?hl=en.