Mail Thread Index

• Date Index

• Re: [N8VEM: 17233] Re: ECB 6x0x ATX/VME first test, Ian May
  • Message not available
    • Re: [N8VEM: 17274] Re: ECB 6x0x ATX/VME first test, Ian May
      • Re: [N8VEM: 17274] Re: ECB 6x0x ATX/VME first test, Borut
  • <Possible follow-ups>
  • RE: [N8VEM: 17233] Re: ECB 6x0x ATX/VME first test, Dan Werner
    • Re: [N8VEM: 17233] Re: ECB 6x0x ATX/VME first test, Borut
• Greetings from my N8-2312!, Fabio Battaglia
  • RE: [N8VEM: 17278] Greetings from my N8-2312!, Andrew Lynch
    • Re: [N8VEM: 17278] Greetings from my N8-2312!, Fabio Battaglia
• SBC-v2 hangup issue resolved: RESET signal going to 82C55 and 16C550, rene . . . .
  • Re: SBC-v2 hangup issue resolved: RESET signal going to 82C55 and 16C550, Borut
• Re: [N8VEM: 17277] Re: ECB 12-slot Extended Backplanes arrived, John Coffman
• 6x0x prototype board status, Andrew Lynch
  • Re: 6x0x prototype board status, Borut
  • Re: [N8VEM: 17286] 6x0x prototype board status, John Coffman
• Jumper settings for ECB Multifunction I/O card, Edward Snider
  • Re: Jumper settings for ECB Multifunction I/O card, Edward Snider
  • Re: [N8VEM: 17288] Jumper settings for ECB Multifunction I/O card, John Coffman
    • Re: [N8VEM: 17288] Jumper settings for ECB Multifunction I/O card, Edward Snider
• A BHE question from a wannabe computer designer, joe . h . . .
  • Re: A BHE question from a wannabe computer designer, Sergey
    • Re: [N8VEM: 17307] Re: A BHE question from a wannabe computer designer, Joe Herdler
      • Re: [N8VEM: 17307] Re: A BHE question from a wannabe computer designer, Sergey
• Re: ECB 12-slot Extended Backplanes arrived, Wayne Warthen
  • Re: [N8VEM: 17293] Re: ECB 12-slot Extended Backplanes arrived, Paul Birkel
    • Re: [N8VEM: 17293] Re: ECB 12-slot Extended Backplanes arrived, Wayne Warthen
      • Re: [N8VEM: 17295] Re: ECB 12-slot Extended Backplanes arrived, Paul Birkel
      • Re: [N8VEM: 17295] Re: ECB 12-slot Extended Backplanes arrived, Wayne Warthen
      • Re: [N8VEM: 17295] Re: ECB 12-slot Extended Backplanes arrived, Vince Mulhollon
• Re: [N8VEM: 15599] Board pictures, Jim Strickland
• Mockup of an "Advanced" V2 Bus Monitor Display, Andrew Bingham
• 6508 Chassis Build Begins, Andrew Bingham
  • Re: 6508 Chassis Build Begins, Andrew Bingham
• Old School Math accelerator boards, joe . h . . .
  • Re: Old School Math accelerator boards, Sergey
• Z80 peripheral board, Raf Ver Berne
  • Re: [N8VEM: 17310] Z80 peripheral board, Fabio Battaglia
    • Re: [N8VEM: 17310] Z80 peripheral board, jjh . . .
      • RE: [N8VEM: 17350] Z80 peripheral board, Andrew Lynch
• Mini-M68000 minimum requirements, Bob Devries
  • Re: [N8VEM: 17311] Mini-M68000 minimum requirements, John Coffman
• Need an ARM SBC, Aakash Rajasekaran
  • Re: [N8VEM: 17314] Need an ARM SBC, Joachim Gaßler
• Re: [N8VEM: 16597] Re: Debugging Zeta Build, Jim Strickland
• ECB Prop IO V2, Wayne Warthen
  • Re: ECB Prop IO V2, Fabio Battaglia
    • Re: [N8VEM: 17319] Re: ECB Prop IO V2, Fabio Battaglia
  • Re: [N8VEM: 17318] ECB Prop IO V2, Wolfgang Kabatzke
    • Re: [N8VEM: 17320] ECB Prop IO V2, Fabio Battaglia
  • Re: ECB Prop IO V2, Wayne Warthen
    • Re: [N8VEM: 17322] Re: ECB Prop IO V2, Wolfgang Kabatzke
  • Re: ECB Prop IO V2, yoda
    • Re: ECB Prop IO V2, Wayne Warthen
  • ECB Prop IO V2, Edward Snider
  • Re: [N8VEM: 17318] ECB Prop IO V2, Max Scane
  • Re: ECB Prop IO V2, opticpow
  • Re: ECB Prop IO V2, yoda
  • Re: ECB Prop IO V2, Mark Andrews
• RomWBW boot sequence and making bootable media, jjh . . .
  • Re: RomWBW boot sequence and making bootable media, Wayne Warthen
    • Re: RomWBW boot sequence and making bootable media, jjh . . .
      • Re: RomWBW boot sequence and making bootable media, Wayne Warthen
• PPIDE, Harald Rau
  • Re: [N8VEM: 17330] PPIDE, Max Scane
    • Re: [N8VEM: 17330] PPIDE, Harald Rau
      • Re: [N8VEM: 17342] PPIDE, Max Scane
      • Re: [N8VEM: 17342] PPIDE, Harald Rau
      • Re: [N8VEM: 17352] PPIDE, Max Scane
      • Re: [N8VEM: 17352] PPIDE, Harald Rau
• Fwd: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Wolfgang Kabatzke
  • Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Wayne Warthen
    • Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Wayne Warthen
      • Re: [N8VEM: 17336] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, John Coffman
      • Re: [N8VEM: 17336] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Wayne Warthen
      • Re: [N8VEM: 17338] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Wolfgang Kabatzke
    • Re: [N8VEM: 17334] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Wolfgang Kabatzke
      • Re: [N8VEM: 17334] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Wayne Warthen
      • Re: [N8VEM: 17344] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Wolfgang Kabatzke
      • Re: [N8VEM: 17345] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, John Coffman
      • Re: [N8VEM: 17347] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Max Scane
      • Re: [N8VEM: 17347] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Wayne Warthen
      • Re: [N8VEM: 17351] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Max Scane
      • Re: [N8VEM: 17353] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Bob Devries
      • Re: [N8VEM: 17355] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Max Scane
      • Re: [N8VEM: 17353] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, jjh . . .
      • Re: [N8VEM: 17358] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Max Scane
      • Re: [N8VEM: 17351] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Bob Devries
      • Re: [N8VEM: 17351] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, Wayne Warthen
      • Re: [N8VEM: 17344] Re: Re: Update Notice -- Z180 SBC Mark IV board, rev. 1.00, oscarv
• Xi support board availability, Jim Strickland
  • RE: [N8VEM: 17339] Xi support board availability, Andrew Lynch
  • Re: Xi support board availability, Sergey
    • Re: [N8VEM: 17374] Re: Xi support board availability, J. Alexander Jacocks
      • Re: [N8VEM: 17374] Re: Xi support board availability, Sergey
      • Re: [N8VEM: 17377] Re: Xi support board availability, J. Alexander Jacocks
      • Re: [N8VEM: 17377] Re: Xi support board availability, Sergey
      • Re: [N8VEM: 17374] Re: Xi support board availability, joe . h . . .
      • Re: [N8VEM: 17374] Re: Xi support board availability, Sergey
      • Re: [N8VEM: 17374] Re: Xi support board availability, joe . h . . .
      • Re: [N8VEM: 17417] Re: Xi support board availability, J. Alexander Jacocks
      • Re: [N8VEM: 17417] Re: Xi support board availability, Jim Strickland
      • Re: [N8VEM: 17417] Re: Xi support board availability, Edward Snider
      • Re: [N8VEM: 17417] Re: Xi support board availability, Edward Snider
    • Re: Xi support board availability, Jim Strickland
• Another SBC V2 comes to life!, Fabio Battaglia
• ECB Multfunction controller, Bob Devries
  • Re: ECB Multfunction controller, yoda
  • Re: ECB Multfunction controller, yoda
  • Re: ECB Multfunction controller, Edward Snider
    • Re: [N8VEM: 17369] Re: ECB Multfunction controller, Bob Devries
• Looking for a simple low cost PS/2 keyboard interface circuit., Leslie Anderson
  • Re: Looking for a simple low cost PS/2 keyboard interface circuit., oscarv
    • Re: [N8VEM: 17372] Re: Looking for a simple low cost PS/2 keyboard interface circuit., Dan Werner
• Z80 RTOS..., picm . . .
  • RE: [N8VEM: 17378] Z80 RTOS..., Andrew Lynch
    • Re: [N8VEM: 17378] Z80 RTOS..., Andrew Bingham
      • Re: [N8VEM: 17381] Z80 RTOS..., Paul Birkel
• Vintage + modern = fun, Nikolay Dimitrov
  • Re: [N8VEM: 17386] Vintage + modern = fun, James Moxham
    • Re: [N8VEM: 17386] Vintage + modern = fun, Andrew Bingham
      • Re: [N8VEM: 17386] Vintage + modern = fun, yoda
      • Re: [N8VEM: 17386] Vintage + modern = fun, Andrew Bingham
      • Re: [N8VEM: 17389] Vintage + modern = fun, Joachim Gaßler
      • Re: [N8VEM: 17389] Vintage + modern = fun, Vince Mulhollon
      • Re: [N8VEM: 17393] Vintage + modern = fun, Nikolay Dimitrov
      • Re: [N8VEM: 17393] Vintage + modern = fun, Alan Hightower
      • Re: [N8VEM: 17395] Vintage + modern = fun, Nikolay Dimitrov
      • Re: [N8VEM: 17393] Vintage + modern = fun, Vince Mulhollon
      • Re: [N8VEM: 17395] Vintage + modern = fun, James Moxham
      • Re: [N8VEM: 17398] Vintage + modern = fun, Eluan Costa Miranda
      • Re: [N8VEM: 17399] Vintage + modern = fun, James Moxham
      • Re: [N8VEM: 17400] Vintage + modern = fun, Nikolay Dimitrov
      • Re: [N8VEM: 17404] Vintage + modern = fun, James Moxham
      • Re: [N8VEM: 17407] Vintage + modern = fun, Paul Birkel
      • Re: [N8VEM: 17407] Vintage + modern = fun, Jim Strickland
      • Re: [N8VEM: 17410] Vintage + modern = fun, Alan Hightower
      • Re: [N8VEM: 17410] Vintage + modern = fun, Jim Strickland
      • Re: [N8VEM: 17404] Vintage + modern = fun, James Moxham
      • Re: [N8VEM: 17413] Vintage + modern = fun, Paul Birkel
      • Message not available
      • Re: [N8VEM: 17427] Vintage + modern = fun, Bob Grieb
      • Re: [N8VEM: 17398] Vintage + modern = fun, Alan Hightower
      • Re: [N8VEM: 17398] Vintage + modern = fun, Sergey
      • Re: [N8VEM: 17403] Vintage + modern = fun, Bob Grieb
      • Re: [N8VEM: 17403] Vintage + modern = fun, Nikolay Dimitrov
      • Re: [N8VEM: 17405] Vintage + modern = fun, picm . . .
      • Re: [N8VEM: 17389] Vintage + modern = fun, yoda
• KiCAD Libraries?, Andrew Bingham
  • Re: [N8VEM: 17413] KiCAD Libraries?, John Coffman
  • Re: [N8VEM: 17413] KiCAD Libraries?, Andrew Lynch
• Group Order Interest Pre-Check - 6x0x ATX/VME Board, Andrew Bingham
  • Re: [N8VEM: 17421] Group Order Interest Pre-Check - 6x0x ATX/VME Board, Fabio Battaglia
  • Re: Group Order Interest Pre-Check - 6x0x ATX/VME Board, Vince Mulhollon
  • Re: Group Order Interest Pre-Check - 6x0x ATX/VME Board, Brian Marstella
  • Re: Group Order Interest Pre-Check - 6x0x ATX/VME Board, oscarv
  • Group Order Interest Pre-Check - 6x0x ATX/VME Board, AG5AT
  • Re: Group Order Interest Pre-Check - 6x0x ATX/VME Board, nbreeden
  • Re: Group Order Interest Pre-Check - 6x0x ATX/VME Board, yoda
  • RE: [N8VEM: 17421] Group Order Interest Pre-Check - 6x0x ATX/VME Board, Kip Koon
  • Re: Group Order Interest Pre-Check - 6x0x ATX/VME Board, Edward Snider
• RE: [N8VEM: 17421] Group Order Interest Pre-Check - 6x0x ATX/VME Board, Paul Dennison
• Re: [N8VEM: 17421] Group Order Interest Pre-Check - 6x0x ATX/VME Board, gunpilot8161@gmail.com
• 1.8432MHz XC231-ND Substitute, Charles Blythe