I had it working on the n8vem under CP/M. But I do not have it working yet on the N8.
Dan Werner
Hi Paul! Thanks! Nik posted some photos a while back on his ECB to Z80
shim socket. They are in his photo folder with these
http://n8vem-sbc.pbworks.com/w/file/26297769/100_1061.JPG
http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder¶m=Niks
As I recall there were some messages on the mailing list and also Nik has a
Picasa photo page set up
http://groups.google.com/group/n8vem/browse_thread/thread/23d699592d963c8b/d
12a2d87e4a3c57b?hl=en&lnk=gst&q=nik+photos#d12a2d87e4a3c57b
There are still some of the ECB MSX cartridge reader PCBs left. I think
those work as they should although Dan did most of the work on that
particular board. The MSX EPROM cartridges also work AFAIK however I am
temporarily out of the PCBs. I cannot recall if there was some discussion
about possible redesign of the MSX EPROM cartridge or not.
Can anyone refresh my memory on the status of the MSX EPROM cartridge? I
was thinking once the N8 was released it would bring the MSX work back into
the forefront again to complete some of these projects.
Thanks and have a nice day!
Andrew Lynch
> -----Original Message-----
> From: n8...@googlegroups.com [mailto:n8...@googlegroups.com] On
> Behalf Of Paul Birkel
> Sent: Friday, June 15, 2012 1:39 AM
> To: n8...@googlegroups.com
> Subject: Re: [N8VEM: 13847] PropIO and PPIDE PCBs reordered
>
> Thanks for the reminder Andrew.
>
> Is Nik's work on adding a PropIO to a Kaypro II documented somewhere?
>
> What's the current situation with the ECB MSX cartridge reader (and
> cartridges/software)?
>
> On Thu, Jun 14, 2012 at 12:35 PM, Andrew Lynch <LYN...@yahoo.com>
> wrote:
> > Hi Paul! Thanks! Yes, I still have several of the ECB to Z80 socket
> > shim boards. They are sort of experimental but I think it is
> > fascinating to allow ECB peripherals to be spliced into other non-ECB
Z80
> microcomputers.
> >
> > Nik did some incredible work adding a PropIO to a Kaypro II and also a
> > SpectraVideo MSX computer. Very interesting stuff! Unfortunately
> > they have not been quite as popular as I was hoping.
> >
> > The mini-board ECB to Z80 socket shim is $5 each plus $1 shipping in
> > the US and $3 elsewhere. If you would like one please let me know.
> > Thanks and have a nice day!
> >
> > Andrew Lynch
> >
> >> -----Original Message-----
> >> From: n8...@googlegroups.com [mailto:n8...@googlegroups.com] On
> >> Behalf Of Paul Birkel
> >> Sent: Thursday, June 14, 2012 11:20 AM
> >> To: n8...@googlegroups.com
> >> Subject: Re: [N8VEM: 13835] PropIO and PPIDE PCBs reordered
> >>
> >> How about the MINI ECB to Z80 socket adapter?
> >>
> >> On Wed, Jun 13, 2012 at 4:50 PM, Andrew Lynch <LYN...@yahoo.com>
> >> wrote:
> >> > Hi! There was more demand for the PPIDE PCBs than I anticipated so
> >> > I reordered another double batch. Also since the PropIO PCB has
> >> > been out for a while now and some builders are waiting I reordered
> >> > a batch of those as well.
> >> >
> >> > The boards should be here in about three weeks or sometime in early
> > July.
> >> > My estimates have not been too great lately so take that date with
> >> > a grain of salt.
> >> >
> >> > Are there any other boards that the builders would like to see
> >> > reordered or are waiting for? Please let me know.
> >> >
> >> > Thanks and have a nice day!
> >> >
> >> > Andrew Lynch
> >> >
> >> > --
> >> > You received this message because you are subscribed to the Google
> >> > Groups "N8VEM" group.
> >> > To post to this group, send email to n8...@googlegroups.com.
> >> > To unsubscribe from this group, send email to
> >> > n8vem+un...@googlegroups.com.
> >> > For more options, visit this group at
> >> > http://groups.google.com/group/n8vem?hl=en.
> >>
> >> --
> >> You received this message because you are subscribed to the Google
> >> Groups "N8VEM" group.
> >> To post to this group, send email to n8...@googlegroups.com.
> >> To unsubscribe from this group, send email to
> >> n8vem+un...@googlegroups.com.
> >> For more options, visit this group at
> >> http://groups.google.com/group/n8vem?hl=en.
> >
> > --
> > You received this message because you are subscribed to the Google
Groups
> "N8VEM" group.
> > To post to this group, send email to n8...@googlegroups.com.
> > To unsubscribe from this group, send email to
> n8vem+un...@googlegroups.com.
> > For more options, visit this group at
> http://groups.google.com/group/n8vem?hl=en.
> >
>
> --
> You received this message because you are subscribed to the Google Groups
> "N8VEM" group.
> To post to this group, send email to n8...@googlegroups.com.
> To unsubscribe from this group, send email to
> n8vem+un...@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/n8vem?hl=en.
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To post to this group, send email to n8...@googlegroups.com.
To unsubscribe from this group, send email to n8vem+un...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/n8vem?hl=en.