-Wayne
On Thursday, July 26, 2012 4:20:56 PM UTC-7, Doug Wood wrote:
Sergey
I am Using the RomWBW 2.0
For the Zeta Rom Im Using Zeta_ppp.rom on the 39sf040
For the PPP im Using ParPortProp.eeprom on the 24lc512
Doug
On Thursday, 26 July 2012 18:27:47 UTC-4, Doug Wood wrote:Hi Everyone,
I turned on my PPP last night for the first time.
Everything seemed to initialize okay and a banner Acress the Bottom.
Init ParPortProp .....ok
Init Keyboard ......ok
Init SD Card .......ok
Init Serial Port .......ok
Starting PortIO cog ...ok
Banner Across The Bottom Of the screen.
Flashing cursor
The problem is there is no keyboard input.
I tried two different keyboards. ( no Change )
I used the files specified by Surgey for the ZETA SBC and the PPP Board eeprom.
Checked jumpers on both Boards. Par port to Par Port IDC 26 pin cable seemp ok.
My Zeta SBC has been working for 2 months with no apparent problems.
Does anyone have any suggestions ?
Thanks
Doug Wood