[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [N8VEM: 10557] Re: N8 Beta: socket city...
David,
How about a photo so we can verify the physical location of your jumpers...?
Thanks, Douglas
On Jul 14, 2011, at 11:15 PM, vk5dg wrote:
> Hello All,
>
> Just got my bare minimum N8 running. Its got enough chips to get the
> dbgmon and CP/M A; and B: up with Max's ROM image. No drives yet.
> Bewdy!
> All done in just two days with a dose of the flu to slow me down.
> Now the real fun begins.
>
> I had to make one change from the drawing because I did not get a
> 6.144 MHz oscillator block.
> I used one of many crystals on hand, a 470k resistor and 2x 27pF
> capacitors soldered under the
> board across pins 3 and 4 of the CPU. K17 was left out.
>
> Regards
>
> David
>
> P.S. Here is a list of what chips and jumpers used.
> U3 74LS10
> U6 74ALS32
> U8 74LS06
> U10 74LS14
> U17 ROM (27C040 in this case)
> U19 MAX-232
> U24 74ALS32
> U34 74LS04
> U52 CPU (Z8S18016VSC) running at 6.144 MHz
> U53 RAM (681000 128k chip)
> U54 DS1210 (or use wire links between pins 1-8 and 5-6)
> U55 74LS273
> U57 74LS682
> U58 74LS138
> U64 74LS139
> U68 74ALS138
> U69 74ALS32
> U70 74LS174
> P37 CPU osc (not used by me, xtal under board)
>
> Jumpers
> K3 1-2
> K4 1-2
> K5 1-2
> K16 2-3 (128k RAM)
> K17 2-3 (not used by me, xtal under board)
> K18 1-2
> P22 3-4, 5-6
>
> --
> You received this message because you are subscribed to the Google Groups "N8VEM" group.
> To post to this group, send email to n8...@googlegroups.com.
> To unsubscribe from this group, send email to n8vem+un...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/n8vem?hl=en.
>