[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [N8VEM: 2340] backplane connector
- To: <n8...@googlegroups.com>
- Subject: RE: [N8VEM: 2340] backplane connector
- From: "Andrew Lynch" <lyn...@yahoo.com>
- Date: Sun, 1 Feb 2009 14:45:06 -0500
- Authentication-results: mx.google.com; spf=pass (google.com: domain of lyn...@yahoo.com designates 66.196.96.95 as permitted sender) smtp.mail=lyn...@yahoo.com; domainkeys=pass (test mode) header.From=lyn...@yahoo.com
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Received:X-YMail-OSG:X-Yahoo-Newman-Property:From:To:References:Subject:Date:Message-ID:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Mailer:Thread-Index:In-Reply-To:X-MimeOLE; b=xYp/9biCo+HKxEQfcN9l8tiAAJfzPCr2uL+JXi4tA4W5eqTLG0K76mvScjAJ60rtUU69S8cp7ft3KxS4bPviI0v8qFP3TtQ2djffa+TuZ+TlINa+nk6QLwzK0+JXd8utet+wwZ7qeFQtJDGS49dMJAf7w2bjgqEkprYpL5ZTsCE= ;
- Domainkey-status: good (test mode)
- In-reply-to: <4985DAF7.8090907@nj7p.org>
- References: <eeb36907-00d1-45dc-aca2-c2f6654826da@q37g2000vbn.googlegroups.com> <d1486d3f-20b6-4be4-a9c2-9ffe275b7f38@p23g2000prp.googlegroups.com> <466559af-f55d-475f-9e00-7bbcb392159a@j39g2000yqn.googlegroups.com> <19d6e884-4914-4df2-887a-3fd4ce1bcc81@j38g2000yqa.googlegroups.com> <4985DAF7.8090907@nj7p.org>
- Thread-index: AcmEkb83l2mFxXsLS+GngB9EvfmQLgADMwMg
> -----Original Message-----
> From: n8...@googlegroups.com [mailto:n8...@googlegroups.com] On Behalf Of
> Bill Beech (NJ7P)
> Sent: Sunday, February 01, 2009 12:25 PM
> To: n8...@googlegroups.com
> Subject: [N8VEM: 2340] backplane connector
>
>
> Exactly what Jameco or digikey part number is used for the backplane
> connector? I ordered the part number in the parts list and got a
> connector with long pins with a wide flat part that will not allow the
> pins to go through the backplane card. The Erni part number I have is:
> 913110 RC 2
>
> Bill
>
>
>
> [AJL>]
Hi Bill! Thanks! I used Jameco part number 851500
http://n8vem-sbc.pbwiki.com/ECB-Backplane-Parts-List
Please note to get the DIN 41612 96 pin FEMALE connector for the ECB
Backplane with the long solder tails. The ECB Backplane is double thickness
and requires solder tails greater than 3.2 mm length. Jameco has part
number 851500 which works fine.
http://www.jameco.com/Jameco/Products/ProdDS/851500.pdf
Thanks and have a nice day!
Andrew Lynch