RetroBrew Computers Forum
Discussion forum for the RetroBrew Computers community.

Home » RBC Forums » General Discussion » Has anyone reverse engineered SP0256A external serial speech ROM (SPR016, SPR032, and SPR128)
Re: Arduino lab tool wrapped-around a SP0256 to reverse engineer an unobtainium SPR000 [message #10748 is a reply to message #10746] Thu, 02 May 2024 20:45 Go to previous messageGo to previous message
plasmo is currently offline  plasmo
Messages: 916
Registered: March 2017
Location: New Mexico, USA
Senior Member
Today I received the 2 SP0256AL2 I ordered from 351_windsor. I also have the CPLD protoboard checked out. It is ready to wire in the circuits for SP0256-AL2. I don't have 3.12MHz crystal, so I plan to either divide the 22Mhz Z80 clock by 7 to 3.14MHz or divide the 25MHz oscillator on the protoboard by 8 to get 3.125MHz. The audio amplifier is LM386 which I have many on hand. The immediate goal is have Z80 drive it to make some sound. I should be able to spend an hour or two a day working on this.
Bill
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: SDC68020
Next Topic: Netlist auditing question


Current Time: Wed May 14 11:06:59 PDT 2025

Total time taken to generate the page: 0.00655 seconds