| Re: N8 (4314) RomWBW 3.0.1 and PPIDE [message #8295 is a reply to message #8279] |
Fri, 05 February 2021 23:50  |
andrii_kutepov
Messages: 29
Registered: November 2015
|
Junior Member |
|
|
I brainstormed. And rang all the tracks around the PPI and IDE connector.
I found output a PPI panel with cold solder. This is the pin of 12 - PC5.
My stupid mistake cost me many hours of tests. I'm sorry to bother you.
Now everything works perfectly.
RomWBW HBIOS v3.1.1-pre.40, 2021-02-06
N8 Z8S180-N @ 18.432MHz IO=0x40
0 MEM W/S, 2 I/O W/S, INT MODE 2, MMU=N8
512KB ROM, 1024KB RAM
AY: IO=0x9C
ASCI0: IO=0x40 ASCI W/BRG MODE=38400,8,N,1
ASCI1: IO=0x41 ASCI W/BRG MODE=38400,8,N,1
DSRTC: MODE=STD IO=0x88 Sat 2021-02-06 09:50:31 CHARGE=ON
TMS: IO=0x98
PPK: IO=0x84
MD: UNITS=2 ROMDISK=384KB RAMDISK=768KB
FD: IO=0x8C UNITS=2
PPIDE: IO=0x80
PPIDE0: LBA BLOCKS=0x003D8000 SIZE=1968MB
PPIDE1: NO MEDIA
SD: MODE=CSIO OPR=0x88 CNTR=0x4A TRDR=0x4B DEVICES=1
SD0: SDSC NAME=SU128 BLOCKS=0x0003C100 SIZE=120MB
*** Activating CRT Console ***
Thank you all very much for your help.
Good luck.
Andrii
|
|
|
|
RetroBrew Computers Forum
Members
Search
Help
Login
Home
