RetroBrew Computers Forum: General Discussion

Home » RBC Forums » General Discussion » ECB-DMA (Wolfgang Kabatzge's ECB-DMA)

Show: Today's Messages :: Show Polls :: Message Navigator

Re: ECB-DMA [message #8735 is a reply to message #8715]

Fri, 02 July 2021 02:06

b1ackmai1er
Messages: 396
Registered: November 2017

Senior Member

Hi Everyone,

i/o read and writes work through dma.
have build a dma initialization driver and helper routines for romwbw.
implemented dma block move for sector transfers in memory disk driver.
implemented dma block i/o read and write for ramfloppy driver.

not seeing any performance increase as previous posters predicted but it has added another blikenlight to to system Smile

this does appear to be a suitable starting point for dma based projects.

todo: submit drivers to romwbw dev build
see if higher speed dma chips are available
update and post kicad development files and gerbers
consider changing dma to plcc footprint

Best Wishes Phil

Report message to a moderator

[Message index]

		ECB-DMA By: b1ackmai1er on Sun, 10 November 2019 00:16
		Re: ECB-DMA By: Wayne W on Tue, 12 November 2019 12:31
		Re: ECB-DMA By: jcoffman on Tue, 12 November 2019 16:14
		Re: ECB-DMA By: etchedpixels on Wed, 13 November 2019 15:40
		Re: ECB-DMA By: b1ackmai1er on Fri, 15 November 2019 20:34
		Re: ECB-DMA By: b1ackmai1er on Sat, 16 November 2019 04:56
		Re: ECB-DMA By: etchedpixels on Sat, 16 November 2019 05:23
		Re: ECB-DMA By: jcoffman on Sat, 16 November 2019 08:03
		Re: ECB-DMA By: wsm on Sat, 16 November 2019 09:28
		Re: ECB-DMA By: jcoffman on Sat, 16 November 2019 13:09
		Re: ECB-DMA By: wsm on Sat, 16 November 2019 14:02
		Re: ECB-DMA By: b1ackmai1er on Sun, 17 November 2019 05:50
		Re: ECB-DMA By: jcoffman on Sun, 17 November 2019 07:06
		Re: ECB-DMA By: etchedpixels on Sun, 17 November 2019 07:41
		Re: ECB-DMA By: wsm on Sun, 17 November 2019 10:06
		Re: ECB-DMA By: wsm on Sun, 17 November 2019 14:12
		Re: ECB-DMA By: jcoffman on Sun, 17 November 2019 21:28
		Re: ECB-DMA By: rcini on Thu, 12 December 2019 17:52
		Re: ECB-DMA By: wsm on Thu, 12 December 2019 21:24
		Re: ECB-DMA By: rcini on Fri, 13 December 2019 07:22
		Re: ECB-DMA By: mikesmith on Thu, 09 January 2020 18:36
		Re: ECB-DMA By: wsm on Thu, 09 January 2020 20:28
		Re: ECB-DMA By: lynchaj on Mon, 26 April 2021 09:03
		Re: ECB-DMA By: lynchaj on Tue, 27 April 2021 04:41
		Re: ECB-DMA By: lynchaj on Wed, 28 April 2021 08:00
		Re: ECB-DMA By: jcoffman on Sat, 16 November 2019 07:56
		Re: ECB-DMA By: jcoffman on Sat, 16 November 2019 07:45
		Re: ECB-DMA By: b1ackmai1er on Thu, 17 June 2021 07:14
		Re: ECB-DMA By: lynchaj on Thu, 17 June 2021 07:29
		Re: ECB-DMA By: b1ackmai1er on Sat, 19 June 2021 05:33
		Re: ECB-DMA By: lynchaj on Sat, 19 June 2021 07:11
		Re: ECB-DMA By: lynchaj on Sat, 19 June 2021 07:30
		Re: ECB-DMA By: b1ackmai1er on Mon, 21 June 2021 07:31
		Re: ECB-DMA By: b1ackmai1er on Sat, 26 June 2021 19:10
		Re: ECB-DMA By: b1ackmai1er on Fri, 02 July 2021 02:06
		Re: ECB-DMA By: lynchaj on Fri, 02 July 2021 04:49
		Re: ECB-DMA By: b1ackmai1er on Fri, 02 July 2021 07:23
		Re: ECB-DMA By: etchedpixels on Thu, 08 July 2021 08:22
		Re: ECB-DMA By: b1ackmai1er on Fri, 09 July 2021 22:08
		Re: ECB-DMA By: lynchaj on Tue, 13 July 2021 11:44
		Re: ECB-DMA By: lynchaj on Thu, 29 July 2021 12:15
		Re: ECB-DMA By: b1ackmai1er on Sun, 04 July 2021 08:09
		Re: ECB-DMA By: b1ackmai1er on Mon, 05 July 2021 07:35
		Re: ECB-DMA By: lynchaj on Wed, 07 July 2021 03:27
		Re: ECB-DMA By: lynchaj on Wed, 07 July 2021 03:44
		Re: ECB-DMA By: lynchaj on Mon, 14 March 2022 03:48
		Re: ECB-DMA By: lynchaj on Wed, 23 March 2022 10:05

Previous Topic:	Parallel Printer Port driver for Z80
Next Topic:	Using Multi-Core Processors to build a in-circuit replacement/enhancement for vintage CPUs

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Oct 25 17:42:47 PDT 2025

Total time taken to generate the page: 0.01317 seconds