RetroBrew Computers Forum: General Discussion » MiniMax8085

Home » RBC Forums » General Discussion » MiniMax8085 - Extension Board

Show: Today's Messages :: Show Polls :: Message Navigator

MiniMax8085 - Extension Board [message #9184]

Fri, 08 October 2021 14:23

Sergey
Messages: 236
Registered: October 2015
Location: Portland, OR

Senior Member

Hi,

I am designing an extension board for my MiniMax8085 SBC (https://github.com/skiselev/minimax8085 Wink

It is rather a mix of components, that hopefully will allow to run a bit more things than just the monitor and the BASIC interpreter:
- 8231A/Am9511A floating point coprocessor
- 8254 timer
- 8255 parallel port interface
- Additional 32 KiB SRAM, which can be switched in instead of the ROM

The preliminary schematic and the PCB layout are attached.

I'd appreciate your feedback!

Thanks,
Sergey

Attachment: Mini8085Ext-Schematic-0.9.pdf
(Size: 221.93KB, Downloaded 381 times)
Attachment: Mini8085Ext-Board-0.9.pdf
(Size: 88.59KB, Downloaded 413 times)

Report message to a moderator

Re: MiniMax8085 - Extension Board [message #9185 is a reply to message #9184]

Fri, 08 October 2021 20:25

b1ackmai1er
Messages: 396
Registered: November 2017

Senior Member

Nice, love to build one.

Report message to a moderator

Re: MiniMax8085 - Extension Board [message #9188 is a reply to message #9184]

Sat, 09 October 2021 13:39

alkmar
Messages: 29
Registered: August 2019

Junior Member

I can't wait until you sell PCB's or release the gubers I have two MiniMax8085 who need a friend Razz

Report message to a moderator

Re: MiniMax8085 - Extension Board [message #9234 is a reply to message #9184]

Mon, 18 October 2021 13:16

Sergey
Messages: 236
Registered: October 2015
Location: Portland, OR

Senior Member

PCBs ordered, I'll keep you updated on the testing progress.
I'll post the design on GitHub once it is tested

Report message to a moderator

Re: MiniMax8085 - Extension Board [message #9593 is a reply to message #9234]

Sat, 08 January 2022 00:19

Sergey
Messages: 236
Registered: October 2015
Location: Portland, OR

Senior Member

Well, it's been a while.
I made a stupid mistake in the first revision - used wrong footprint for DC-DC converter. Updated/reordered PCBs.
Spent some time building and testing the board over new year's break.
All seems to work properly. The only minor annoyance is that Am9511A APU's END signal is connected to TRAP, so it causes a non-maskable interrupt on completion of every instruction.
Anyway, as promised the design is here: https://github.com/skiselev/minimax8085-apu-ext

I have a few extra PCBs in case someone is interested. Probably just for the price of shipping...

/forum/index.php?t=getfile&id=2605&private=0

/forum/index.php?t=getfile&id=2605&private=0

Attachment: MiniMax8085-APU_Ext.jpg
(Size: 439.76KB, Downloaded 696 times)

Report message to a moderator

Re: MiniMax8085 - Extension Board [message #9605 is a reply to message #9593]

Fri, 14 January 2022 14:12

Sergey
Messages: 236
Registered: October 2015
Location: Portland, OR

Senior Member

b1ackmai1er, alkmar: Please let me know if you'd like the PCBs Smile

Report message to a moderator

Re: MiniMax8085 - Extension Board [message #9627 is a reply to message #9605]

Mon, 17 January 2022 13:30

alkmar
Messages: 29
Registered: August 2019

Junior Member

Sent PM, I would love to get a pair of these PCB's Cool

Report message to a moderator

Re: MiniMax8085 - Extension Board [message #9661 is a reply to message #9627]

Sun, 23 January 2022 09:47

alank2
Messages: 31
Registered: March 2019

Member

Sergey - are you planning on making a CP/M that can run on the minimax8085 using this extension board?

Report message to a moderator

Re: MiniMax8085 - Extension Board [message #9681 is a reply to message #9661]

Wed, 26 January 2022 08:05

Sergey
Messages: 236
Registered: October 2015
Location: Portland, OR

Senior Member

Alank2, that was the idea... When I get some free time.
Unless someone else wants to take a stab at it.
It shouldn't be too difficult. One possible issue is the lack of storage devices, which can be resolved by using the PPI serial port to attach one (e.g. PPIDE).

Report message to a moderator

Previous Topic:	Debugging a SBC v2 Rev. 005i
Next Topic:	Monster FDC - Dual-FDC floppy disk controller card supporting 8 floppy drives

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Oct 10 06:12:36 PDT 2025

Total time taken to generate the page: 0.10525 seconds