Hi

As promised, a Gryphon 1.1 schematic converted to KiCAD. Includes the EEschema ERC file if anyone would like to work on that also. Several (14) severe warnings on bidirectional pins connected to tristate pins. This should work regardless but KiCAD is complaining about it. Is there anything we can do?

To do a pin audit, just print out both the original Proteus Gryphon 1.1 schematic and the new KiCAD Xagdin schematic PDFs. Get a fine point red marker and go through both schematics on component at a time and compare. If they are the same put a red dot next to each pin. If there is a mismatch or something missing, extra unexplained stuff, etc. put a red circle around the offending item and post results here.

Thanks

Andrew Lynch

PS, I gave my schematic the temporary junk name Xagdin to separate it from the Gryphon main branch so people can keep them straight. Xagdin is literally a random username generated to distinguish the two schematics. Once we know the Xagdin (KiCAD) schematic is good we can erase Xagdin and conform the schematic in the Gryphon design series.