This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
The goal of this project is to produce a completely free (as in speech), open hardware home brew Single Board Computer (SBC) capable of running the Linux kernel & userspace applications. The design uses an 80486 CPU and an integrated main board chipset to implement the PC/AT support functions & memory controller in a single package. All design information is and will be publicly posted including EDA files, schematics, PCB layout drawings, firmware (including ROM BIOS), software, and anything else needed for anyone to replicate these boards. The design uses commercially available off-the-shelf components with no proprietary or hidden anything. If you notice any missing design information please notify me immediately on the RBC forums or private message.
This project draws on home brew computer builder experience from multiple prior boards
Development will be split into three phases:
Linux-SBC home brew 486 is an Open Hardware project. All the KiCAD EDA files are posted on the GitLab page and/or the RBC forum
As more open source files and software become available, they will be posted on this wiki and on the Gitlab page
All software is intended to be open source including ROM BIOS and Linux kernel & related operating system
Looking for people to review the Derpy schematic. See announcement on vintage-computers.com
Derpy 1.3 schematic PDF file in the files section below
source the 82C465MV/A/B, 82C602A, and PC87338VLJ/PC97338VLJ chips
Regarding a starting point for CPUs during build and test phase, I recommend either the 16 MHz i486SX or the original 20 MHz i486DX.
What about a System ROM BIOS? My plan is to use coreboot SeaBIOS
Initial Built and Test Team for Derpy PCB
IBM PC AT Technical Reference March 1984
Sergey's Projects - ISA Backplane, Xi 8088, ISA VGA, etc
S100 Computers.com 486 Baby & Full CPU Boards
S100 Computers.com MS-DOS Support Board (PC AT support chips)
KiCAD Schematic Library & PCB Module (Footprint) Creator
KiCAD EDA schematic capture & PCB layout