Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
builderpages:plasmo:start [2018/08/06 20:30]
plasmo
builderpages:plasmo:start [2019/02/08 09:52] (current)
plasmo
Line 17: Line 17:
 ==== ZZ80RC ==== ==== ZZ80RC ====
  
-[[:​builderpages:​plasmo:​ZZ80RC|]] is a CP/​M2.2-ready SBC based on Z280 processor configured to operate in the Z80-bus compatible mode.  It is designed to plug into the RC2014 bus.+[[:​builderpages:​plasmo:​zz80rc|ZZ80RC]] is a CP/​M2.2-ready SBC based on Z280 processor configured to operate in the Z80-bus compatible mode. It is designed to plug into the RC2014 bus
 + 
 +[[:​builderpages:​plasmo:​zz80cf|ZZ80RC-CF]] is an enhanced version of ZZ80RC with a CF flash interface. Like ZZ80RC, it is in all through-hole technology in standard RC2014 format of 100mm x 50mm.
  
 ==== ProtoRC ==== ==== ProtoRC ====
  
-[[:​builderpages:​plasmo:​protorc|ProtoRC]] is a 100mm x 100mm prototype board. It centered around ​Altera EPM7128 CPLD which interface RC2014 signals on one side and 0.1" grid array experiment area on the other side.+[[:​builderpages:​plasmo:​protorc|ProtoRC]] is a 100mm x 100mm prototype board. It centered around ​an Altera EPM7128 CPLD which interface RC2014 signals on one side and 0.1" grid array experiment area on the other side. 
 + 
 +  * [[:​builderpages:​plasmo:​protorc:​protolcd|ProtoLCD]] is prototype of 4-line LCD display on a ProtoRC board. 
 +  * [[:​builderpages:​plasmo:​protorc:​protosio2|ProtoSIO2]] is prototype of Zilog SIO/2 serial device on a ProtoRC board 
 +  * [[:​builderpages:​plasmo:​protorc:​protosound|ProtoSound]] is prototype of AY2149F on a ProtoRC board. 
 + 
 +[[:​builderpages:​plasmo:​protorc1|ProtoRC1]] is a 100mm x 75mm prototype board. It centered around an Altera EPM7128S CPLD. There are more dedicated 7-segment displays and compact flash interface. The prototype area is limited to one row of 300-mil or 600-mil DIPs. 
 + 
 +  * [[:​builderpages:​plasmo:​protorc1:​protocf|ProtoCF]] is a 8-bit compact flash interface on ProtoRC1 board 
 +  * [[:​builderpages:​plasmo:​protorc1:​protosd|ProtoSD]] is a SD card interface on ProtoRC1 board 
 + 
 +[[:​builderpages:​plasmo:​protorc2|ProtoRC2]] is very similar to ProtoRC1 with the addition of a connector for 4×20 LCD character display. 
 + 
 +[[:​builderpages:​plasmo:​protorc3|ProtoRC3]] uses through-hole components only. The CPLD is Altera EPM7064S in 44-pin PLCC package socketed in a through-hole PLCC socket. 
 + 
 +==== Z80SBCRC ==== 
 + 
 +[[:​builderpages:​plasmo:​z80sbcrc|Z80 single board computer for RC2014]] is in the standard RC2014 format of 100mm x 50mm. It is a ROM-less implementation that operates at 20MHz. It also has a compact flash interface. 
 + 
 +[[:​builderpages:​plasmo:​z80sbc64|Z80SBC64]] is a hobbyist friendly version of Z80SBCRC. All components are in through-hole technology and remain in the standard 100mm x 50mm board size. 
 + 
 +==== G8PP ==== 
 + 
 +[[:​builderpages:​plasmo:​g8pp|Generic 8-bit processors prototype]] board is a hybrid board with printed wirings and prototype area to accommodate different 8-bit, 5V processors of 1970's and 1980'​s. G8PP in baseline configuration serves the function of clock, paged memory, compact flash, and serial port for RC2014, resulting in a CP/M capable RC2014 system with the addition of the Z80 CPU board. 
 + 
 +G8PP Base (need better name) is a [[:​builderpages:​plasmo:​g8pp:​g8ppbase|G8PP in baseline configuration]] plus a processor board on a RC2014 backplane. The control signals of RC2014 (nM1, nMREQ, nRD, nWR, nIORQ) as well as the 4 spare signals are reassigned depending on the targeted processor. No hardware changes are required when change to a different processor board, but the CPLD must be reconfigured and new processor software loaded. 
 + 
 +  * [[:​builderpages:​plasmo:​g8pp:​g8ppbasez80|G8PP + Z80]] 
 +  * [[:​builderpages:​plasmo:​g8pp:​g8ppbase8085|G8PP + 8085]] 
 +  * [[:​builderpages:​plasmo:​g8pp:​g8ppbase6502|G8PP + 6502]] 
 +  * [[:​builderpages:​plasmo:​g8pp:​g8ppbase6809|G8PP + 6809]] 
 +  * G8PP + 1802 
 +  * [[:​builderpages:​plasmo:​g8pp:​g8ppbase68k8|G8PP + 68008]] 
 +  * G8PP + 32008
  
 ==== T68KRC ==== ==== T68KRC ====
  
 [[:​builderpages:​plasmo:​t68krc|T68KRC]] is Tiny68K that plugs into the RC2014 backplane and interface to its many I/O modules. [[:​builderpages:​plasmo:​t68krc|T68KRC]] is Tiny68K that plugs into the RC2014 backplane and interface to its many I/O modules.
 +
 +==== Z80MB64 ====
 +
 +A [[:​builderpages:​plasmo:​z80mb64|mother board]] based on Z80SBC64 with 3 RC2014 expansion connectors.
  
 ===== Pathfinder Projects ===== ===== Pathfinder Projects =====
Line 61: Line 100:
 Tiny030 {{:​builderpages:​plasmo:​tiny030_scm.pdf|schematic}} Tiny030 {{:​builderpages:​plasmo:​tiny030_scm.pdf|schematic}}
  
-Altera 7128 {{:​builderpages:​plasmo:​tiny030:​tiny030_cpld.pdf|CPLD schematic}}+Altera 7128 {{:​builderpages:​plasmo:​tiny030:​tiny030_cpld.pdf|CPLD schematic}}, Quartus {{:​builderpages:​plasmo:​tiny030:​tiny030_cpld.zip|design files}}
  
 Tiny030 [[:​builderpages:​plasmo:​tiny030pcb|pc board]] Tiny030 [[:​builderpages:​plasmo:​tiny030pcb|pc board]]
  
 Tiny030 pc board[[:​builderpages:​plasmo:​tiny030buildlog|build]][[:​builderpages:​plasmo:​tiny030buildlog| log]] Tiny030 pc board[[:​builderpages:​plasmo:​tiny030buildlog|build]][[:​builderpages:​plasmo:​tiny030buildlog| log]]
 +
 +Tiny030 {{:​builderpages:​plasmo:​tiny030:​t030bug_v002.zip|monitor debugger}}
  
 ==== Tiny040 ==== ==== Tiny040 ====
builderpages/plasmo/start.1533601829.txt.gz · Last modified: 2018/08/06 20:30 by plasmo
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0