Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
builderpages:plasmo:start [2018/12/03 10:19]
plasmo
builderpages:plasmo:start [2018/12/05 08:20]
plasmo
Line 19: Line 19:
 [[:builderpages:plasmo:zz80rc|ZZ80RC]] is a CP/M2.2-ready SBC based on Z280 processor configured to operate in the Z80-bus compatible mode. It is designed to plug into the RC2014 bus. [[:builderpages:plasmo:zz80rc|ZZ80RC]] is a CP/M2.2-ready SBC based on Z280 processor configured to operate in the Z80-bus compatible mode. It is designed to plug into the RC2014 bus.
  
-[[:www.retrobrewcomputers.orghttps:::www.retrobrewcomputers.org:doku.php?id=:builderpages:plasmo:zz80cf|ZZ80CF]] is an enhanced version of ZZ80RC with a CF flash interface.  Like ZZ80RC, it is in all through-hole technology in standard RC2014 format of 100mm x 50mm.+[[:www.retrobrewcomputers.orghttps:www.retrobrewcomputers.org:doku.php?id=:builderpages:plasmo:zz80cf|ZZ80CF]] is an enhanced version of ZZ80RC with a CF flash interface. Like ZZ80RC, it is in all through-hole technology in standard RC2014 format of 100mm x 50mm.
  
 ==== ProtoRC ==== ==== ProtoRC ====
Line 25: Line 25:
 [[:builderpages:plasmo:protorc|ProtoRC]] is a 100mm x 100mm prototype board. It centered around an Altera EPM7128 CPLD which interface RC2014 signals on one side and 0.1" grid array experiment area on the other side. [[:builderpages:plasmo:protorc|ProtoRC]] is a 100mm x 100mm prototype board. It centered around an Altera EPM7128 CPLD which interface RC2014 signals on one side and 0.1" grid array experiment area on the other side.
  
-[[:builderpages:plasmo:protorc1|ProtoRC1]] is a 100mm x 75mm prototype board.  It centered around an Altera EPM7128S CPLD.  There are more dedicated 7-segment displays and compact flash interface.  The prototype area is limited to one row of 300-mil or 600-mil DIPs.+  * [[:builderpages:plasmo:protorc:protolcd|ProtoLCD]] is prototype of 4-line LCD display on a ProtoRC board. 
 +  * [[:builderpages:plasmo:protorc:protosio2|ProtoSIO2]] is prototype of Zilog SIO/2 serial device on a ProtoRC board 
 +  * [[:builderpages:plasmo:protorc:protosound|ProtoSound]] is prototype of AY2149F on a ProtoRC board.
  
-  * [[:builderpages:plasmo:protoCF|ProtoCF]] is a 8-bit compact flash interface on ProtoRC1 board +[[:builderpages:plasmo:protorc1|ProtoRC1]] is a 100mm x 75mm prototype board. It centered around an Altera EPM7128S CPLD. There are more dedicated 7-segment displays and compact flash interface. The prototype area is limited to one row of 300-mil or 600-mil DIPs.
-  * [[:builderpages:plasmo:protosd|ProtoSD]] is a SD card interface on ProtoRC1 board+
  
-[[:builderpages:plasmo:protorc2|ProtoRC2]] is very similar to ProtoRC1 with the addition of connector for 4x20 LCD character display.+  * [[:builderpages:plasmo:protorc1:protocf|ProtoCF]] is a 8-bit compact flash interface on ProtoRC1 board 
 +  * [[:builderpages:plasmo:protorc1:protosd|ProtoSD]] is SD card interface on ProtoRC1 board
  
-[[:builderpages:plasmo:protorc3|ProtoRC3]] uses through-hole components only.  The CPLD is Altera EPM7064S in 44-pin PLCC package socketed in a through-hole PLCC socket.+[[:builderpages:plasmo:protorc2|ProtoRC2]] is very similar to ProtoRC1 with the addition of a connector for 4×20 LCD character display. 
 + 
 +[[:builderpages:plasmo:protorc3|ProtoRC3]] uses through-hole components only. The CPLD is Altera EPM7064S in 44-pin PLCC package socketed in a through-hole PLCC socket.
  
 ==== Z80SBCRC ==== ==== Z80SBCRC ====
  
-[[:builderpages:plasmo:z80sbcrc|Z80 single board computer for RC2014]] is in the standard RC2014 format of 100mm x 50mm.  It is a ROM-less implementation that operates at 20MHz.  It also has a compact flash interface.+[[:builderpages:plasmo:z80sbcrc|Z80 single board computer for RC2014]] is in the standard RC2014 format of 100mm x 50mm. It is a ROM-less implementation that operates at 20MHz. It also has a compact flash interface.
  
-[[:builderpages:plasmo:z80sbc64|Z80SBC64]] is a hobbyist friendly version of Z80SBCRC.  All components are in through-hole technology and remain in the standard 100mm x 50mm board size.+[[:builderpages:plasmo:z80sbc64|Z80SBC64]] is a hobbyist friendly version of Z80SBCRC. All components are in through-hole technology and remain in the standard 100mm x 50mm board size.
  
 ==== G8PP ==== ==== G8PP ====
builderpages/plasmo/start.txt · Last modified: 2024/03/24 23:39 by plasmo
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0