Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
builderpages:plasmo:start [2020/09/29 07:58]
plasmo
builderpages:plasmo:start [2020/10/14 07:57] (current)
plasmo
Line 123: Line 123:
 [[:​builderpages:​plasmo:​t68krc_r01|T68KRC,​ rev0.1]] is Tiny68K that plugs into the RC2014 backplane and interface to its many I/O modules. [[:​builderpages:​plasmo:​t68krc_r01|T68KRC,​ rev0.1]] is Tiny68K that plugs into the RC2014 backplane and interface to its many I/O modules.
  
-[[:​builderpages:​plasmo:​t68kmb|T68MB]] is T68KRC with 3 RC2014 expansion bus added. ​ It also has a dedicated I2C connector for 128x64 ​OLED display.+[[:​builderpages:​plasmo:​t68kmb|T68MB]] is T68KRC with 3 RC2014 expansion bus added. It also has a dedicated I2C connector for 128×64 ​OLED display.
  
 ===== Simple80 ===== ===== Simple80 =====
Line 191: Line 191:
  
 [[:​builderpages:​plasmo:​protorc4|ProtoRC4]] uses EPM7064STC100 that was recovered from recycled pc board [[:​builderpages:​plasmo:​protorc4|ProtoRC4]] uses EPM7064STC100 that was recovered from recycled pc board
 +
 +[[:​builderpages:​plasmo:​dpram|DPRAM]] is a prototype board based on IDT7134 dual port RAM to explore multiprocessor system. ​ This version has a Z80 running as a slave processor and a EPM7064S CPLD as glue logic.
  
 ====== RC2014 SBC for Arduino Mega Enclosure ====== ====== RC2014 SBC for Arduino Mega Enclosure ======
builderpages/plasmo/start.txt · Last modified: 2020/10/14 07:57 by plasmo
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0