Engineering Change for Rev0 CRC65

This engineering change disconnects the 6502's SYNC signal to RC2014 pin 26 and connects CF chip select to RC2014 pin 26 instead.

www.retrobrewcomputers.org_lib_plugins_ckgedit_fckeditor_userfiles_image_builderpages_plasmo_crc65_crc65_rev0_ec.jpg

Picture shows a cut (partly obscured by the jumper wire) right above RC2014 pin 26 and a jumper from CPLD to RC2014 pin 26.

builderpages/plasmo/crc65/rev0ec.txt · Last modified: 2021/06/04 21:53 by plasmo
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0