Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
boards:sbc:sbc_v2:sbc_v2 [2019/05/12 03:42]
b1ackmai1er
boards:sbc:sbc_v2:sbc_v2 [2019/05/12 03:43] (current)
b1ackmai1er
Line 11: Line 11:
 To configure the V2-003 board to work in Kontron mode with the external reset coming from the backplane the following workaround can be made. To configure the V2-003 board to work in Kontron mode with the external reset coming from the backplane the following workaround can be made.
  
-  - +  - Pin 3 on K13 needs to be jumpered to Pin 2 of P6 (Reset switch jumper) - this connects the backplane reset input pin (c31) to the reset circuit input. 
- +  - Pin 1-2 needs to be jumpered on K13 - this connects the /reset circuit output to the backplane reset out pin(c26).
-Pin 3 on K13 needs to be jumpered to Pin 2 of P6 (Reset switch jumper) - this connects the backplane reset input pin (c31) to the reset circuit input. +
- +
-  - +
- +
-Pin 1-2 needs to be jumpered on K13 - this connects the /reset circuit output to the backplane reset out pin(c26).+
  
  
boards/sbc/sbc_v2/sbc_v2.txt · Last modified: 2019/05/12 03:43 by b1ackmai1er
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0