Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boards:sbc:6x0x-atx-6u:start [2015/10/27 03:38]
admin ↷ Page moved from sbc:6x0x-atx-6u:start to boards:sbc:6x0x-atx-6u:start
boards:sbc:6x0x-atx-6u:start [2016/06/17 03:45] (current)
tor WDC is Western Design Center, not Western Digital. WD never made 65C02.
Line 7: Line 7:
 ===== Pictures ===== ===== Pictures =====
  
-==== Completed Production Board (6502 / DOS/65 Configuration) ====+==== Completed Production Board (6502/​DOS/​65 Configuration) ====
  
-{{:​sbc:​6x0x-atx-6u:​6502dos65-jumpers.jpg?​640}}+{{boards:​sbc:​6x0x-atx-6u:​6502dos65-jumpers.jpg?​640}}
  
-==== Completed Production Board (6809 / Flex9 Configuration) ====+==== Completed Production Board (6809/Flex9 Configuration) ====
  
-{{:​sbc:​6x0x-atx-6u:​6809flex9-jumpers.jpg?​640}}+{{boards:​sbc:​6x0x-atx-6u:​6809flex9-jumpers.jpg?​640}}
  
 ==== Production PCB Revision 2.00-013 Front Solder Mask ==== ==== Production PCB Revision 2.00-013 Front Solder Mask ====
  
-{{:​sbc:​6x0x-atx-6u:​6x0x-6u-013-frontsoldermask.jpg?​640}}+{{boards:​sbc:​6x0x-atx-6u:​6x0x-6u-013-frontsoldermask.jpg?​640}}
  
 ====== Specifications ====== ====== Specifications ======
Line 55: Line 55:
 ==== Production PCB Revision 2.00-013 ==== ==== Production PCB Revision 2.00-013 ====
  
-{{:​sbc:​6x0x-atx-6u:​printing_ecb_6x0x-6u-013-sch.pdf|Schematics Revision 2.00-013}}+{{boards:​sbc:​6x0x-atx-6u:​printing_ecb_6x0x-6u-013-sch.pdf|Schematics Revision 2.00-013}}
  
-{{:​sbc:​6x0x-atx-6u:​printing_ecb_6x0x-6u-013-sch.pdf|Board Layer Plots Revision 2.00-013}}+{{boards:​sbc:​6x0x-atx-6u:​printing_ecb_6x0x-6u-013-sch.pdf|Board Layer Plots Revision 2.00-013}}
  
 ===== Memory Management Unit ===== ===== Memory Management Unit =====
  
-For a detailed description of the Memory Management Unit operation, see {{:​sbc:​6x0x-atx-6u:​colossus.pdf|Collossus.pdf}}+For a detailed description of the Memory Management Unit operation, see {{boards:​sbc:​6x0x-atx-6u:​colossus.pdf|Collossus.pdf}}
 ===== Input/​Output Ports ===== ===== Input/​Output Ports =====
  
Line 246: Line 246:
 ===== IC Selection Notes ===== ===== IC Selection Notes =====
  
-Rockwell/​CMD and Western ​Digital ​6502 CPUs have slight differences in pinout. The board was designed for Rockwell/​CMD 6502 in order to make it compatible with 6802 processors. To use a Western ​Digital ​W65C02S6TPG-14 simply obtain an extra 40 pin DIP machine pin socket, snip off pin 36, and solder a jumper from pin 35 to pin 36. Insert the WDC 6502 into the modified socket and insert the stack into the board. Details are available in the google group in a post on 2014-07-31 by AG5AT. The post by Ian May on 2014-08-01 details several other differences between Rockwell and WDC chips.+Rockwell/​CMD and Western ​Design Center ​6502 CPUs have slight differences in pinout. The board was designed for Rockwell/​CMD 6502 in order to make it compatible with 6802 processors. To use a Western ​Design Center ​W65C02S6TPG-14 simply obtain an extra 40 pin DIP machine pin socket, snip off pin 36, and solder a jumper from pin 35 to pin 36. Insert the WDC 6502 into the modified socket and insert the stack into the board. Details are available in the google group in a post on 2014-07-31 by AG5AT. The post by Ian May on 2014-08-01 details several other differences between Rockwell and WDC chips.
  
 As designed the board uses MAX232 level shifters which require 1 uF charge pump capacitors. MAX232A can operate with 0.1 uF charge pump capacitors. If you want to install 0.1 uF caps instead of 1.0 uF caps, the ten caps to change are C44 C45 C46 C47 and C48 for the propeller serial port, and C90 C91 C94 C95 C96 for the ACIA serial port. As designed the board uses MAX232 level shifters which require 1 uF charge pump capacitors. MAX232A can operate with 0.1 uF charge pump capacitors. If you want to install 0.1 uF caps instead of 1.0 uF caps, the ten caps to change are C44 C45 C46 C47 and C48 for the propeller serial port, and C90 C91 C94 C95 C96 for the ACIA serial port.
Line 262: Line 262:
 ===== 6502 CPU ===== ===== 6502 CPU =====
  
-{{:​sbc:​6x0x-atx-6u:​dos65-6x0x_colossus_-quickstart.zip|}} - A distribution of the DOS/65 operating system and associated Propeller firmware for the 6x0x-ATX/6U board configured with the 6502 CPU. Note that there are two versions of the Propeller firmware, "​ParPortPropFullColor.eeprom"​ is a full-color terminal using a 1280×1024 tile driver; "​ParPortPropOriginal.eeprom"​ is an alternate version for older monitors using a different Propeller drive. (Updated July 27 2014)+{{boards:​sbc:​6x0x-atx-6u:​dos65-6x0x_colossus_-quickstart.zip|}} - A distribution of the DOS/65 operating system and associated Propeller firmware for the 6x0x-ATX/6U board configured with the 6502 CPU. Note that there are two versions of the Propeller firmware, "​ParPortPropFullColor.eeprom"​ is a full-color terminal using a 1280×1024 tile driver; "​ParPortPropOriginal.eeprom"​ is an alternate version for older monitors using a different Propeller drive. (Updated July 27 2014)
  
-{{:​sbc:​6x0x-atx-6u:​dos65-072714.zip|}} - This packages contains the sources, build scripts, etc for the distribution above. (Updated July 27 2014)+{{boards:​sbc:​6x0x-atx-6u:​dos65-072714.zip|}} - This packages contains the sources, build scripts, etc for the distribution above. (Updated July 27 2014)
  
 ===== 6809 CPU ===== ===== 6809 CPU =====
  
-{{:​sbc:​6x0x-atx-6u:​6x0x_flex9_27072014.zip|}} - A distribution of the Flex9 operating system for the 6x0x-ATX/6U board configured with the 6809 CPU. (Updated July 27 2014)+{{boards:​sbc:​6x0x-atx-6u:​6x0x_flex9_27072014.zip|}} - A distribution of the Flex9 operating system for the 6x0x-ATX/6U board configured with the 6809 CPU. (Updated July 27 2014)
  
 ====== Modifications ====== ====== Modifications ======
Line 285: Line 285:
 |06/20/2014 |2.00-013 |First run of production boards. Fabrication via PCBCART and distribution by Andrew Bingham; 65 boards in production run | |06/20/2014 |2.00-013 |First run of production boards. Fabrication via PCBCART and distribution by Andrew Bingham; 65 boards in production run |
  
-====== ​  ​======+====== ​File Listing ​======
  
-\\+{{filelist>:​boards:​sbc:​6x0x-atx-6u:​*.*&​style=table&​tableheader=1&​tableshowdate=1&​tableshowsize=1}}
  
 +
 +\\
boards/sbc/6x0x-atx-6u/start.1445931533.txt.gz · Last modified: 2015/10/27 03:38 by admin
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0