Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boards:ecb:start [2016/07/06 14:45]
admin [ECB Input/Output/Memory Cards]
boards:ecb:start [2018/01/13 10:48] (current)
b1ackmai1er [ECB Input/Output/Memory Cards]
Line 5: Line 5:
 ===== ECB Backplanes ===== ===== ECB Backplanes =====
  
-^Board Name ^Description/​Features |+^Board Name^Description/​Features
 +|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane]] ​ |A 3-slot EuroCard Bus Backplane  ​|
 |[[:​boards:​ecb:​backplane-8:​start|Backplane-8]] ​ |An 8-slot EuroCard Bus Backplane ​ | |[[:​boards:​ecb:​backplane-8:​start|Backplane-8]] ​ |An 8-slot EuroCard Bus Backplane ​ |
 |[[:​boards:​ecb:​backplane-12:​start|Extended Backplane-12]] ​ |A 12-slot EuroCard Bus Backplane ​ | |[[:​boards:​ecb:​backplane-12:​start|Extended Backplane-12]] ​ |A 12-slot EuroCard Bus Backplane ​ |
 |[[:​boards:​ecb:​backplane-505-6508:​start|12-Slot Backplane for Siemens 505-6508]] ​ |A 12-slot EuroCard Bus Backplane with a form factor specifically designed to fit in a readily available Siemens 505-6508 chassis box  | |[[:​boards:​ecb:​backplane-505-6508:​start|12-Slot Backplane for Siemens 505-6508]] ​ |A 12-slot EuroCard Bus Backplane with a form factor specifically designed to fit in a readily available Siemens 505-6508 chassis box  |
 +
 +\\
 +
  
 ===== ECB Processor Boards ===== ===== ECB Processor Boards =====
  
 ^Board Name  ^Description/​Features ​ | ^Board Name  ^Description/​Features ​ |
-|[[:​boards:​ecb:​kiss-68030:​start|KISS-68030]] ​ |A Motorola 68030 processor board. Requires the Multifunction Controller (MF/PIC) board for I/O (see below). ​This is a new board under active development as of late 2015.  | +|[[:​boards:​ecb:​kiss-68030:​start|KISS-68030]] ​ |A Motorola 68030 processor board. Requires the Multifunction Controller (MF/PIC) board for I/O (see below). ​DRAM memory up to 256Mb. Linux runs in 32Mb.  | 
-|[[:​boards:​ecb:​mini-68k:​start|MINI-68K]]  |A Motorola 68008 processor board. Requires the Multifunction Controller (MF/PIC) board for I/O (see below). ​ | +|[[:​boards:​ecb:​mini-68k:​start|Mini-M68K]]  |A Motorola 68008 processor board. Requires the Multifunction Controller (MF/PIC) board for I/O (see below). Runs CP/M-68.  | 
-|[[:​boards:​sbc:​sbc-188:​start|SBC-188]] ​ |An Intel/AMD 80C188 processor board. //Capable of functioning both as an an SBC and on the ECB bus.// ​ +|[[:​boards:​sbc:​sbc-188:​start|SBC-188]] ​ |An Intel/AMD 80C188 processor board. //Capable of functioning both as an an SBC and on the ECB bus.// ​  ​
-|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|Mark IV]]  |A Zilog Z180 processor board. Capable of functioning both as an an SBC and on the ECB bus.  | +|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|Mark IV]]  |A Zilog Z180 processor board. Capable of functioning both as an an SBC and on the ECB bus. SDcard & IDE-8 (for CF card) interfaces on-board.  | 
-|[[:​boards:​sbc:​sbc_v2:​start|SBC V2]]  |A Zilog Z80 processor board. //Capable of functioning both as an an SBC and on the ECB bus.// ​ +|[[:​boards:​sbc:​sbc_v2:​start|SBC V2]]  |A Zilog Z80 processor board. //Capable of functioning both as an an SBC and on the ECB bus.// ​  ​
-|[[:​boards:​sbc:​6x0x-atx-6u:​start|6x0x-ATX-6U]] ​ |An MOS 6502 / Motorola 6809 processor board. //​Electrically capable of functioning both as an an SBC and on the ECB bus, but ECB software support currently limited// ​ +|[[:​boards:​sbc:​6x0x-atx-6u:​start|6x0x-ATX-6U]] ​ |An MOS 6502 / Motorola 6809 processor board. //​Electrically capable of functioning both as an an SBC and on the ECB bus, but ECB software support currently limited// ​  ​
-|[[:​boards:​sbc:​n8:​start|N8]]  |A Zilog Z180 processor board. //​Electrically capable of functioning both as an an SBC and on the ECB bus, but ECB software support currently limited// ​ |+|[[:​boards:​sbc:​n8:​n8|N8]]  |A Zilog Z180 processor board. //​Electrically capable of functioning both as an an SBC and on the ECB bus, but ECB software support currently limited// ​  ​| 
 +|   ​| ​  | 
 + 
 +\\ 
  
 ===== ECB Input/​Output/​Memory Cards ===== ===== ECB Input/​Output/​Memory Cards =====
Line 29: Line 37:
 |[[:​boards:​ecb:​ramfloppy:​start|RamFloppy]] ​ |A RAM Floppy does not use the local memory resources of the processor, but instead is implemented as an external storage subsystem, which may functionally appear as being similar to a floppy or modest hard drive. ​ | |[[:​boards:​ecb:​ramfloppy:​start|RamFloppy]] ​ |A RAM Floppy does not use the local memory resources of the processor, but instead is implemented as an external storage subsystem, which may functionally appear as being similar to a floppy or modest hard drive. ​ |
 |[[:​boards:​ecb:​cvdu:​start|Color VDU]]  |A traditional video display board with color capability. Provides 80×25 text and will drive VGA displays that are capable of EGA display frequencies. Also includes a keyboard and mouse interface. ​ | |[[:​boards:​ecb:​cvdu:​start|Color VDU]]  |A traditional video display board with color capability. Provides 80×25 text and will drive VGA displays that are capable of EGA display frequencies. Also includes a keyboard and mouse interface. ​ |
 +|[[:​boards:​ecb:​cvdu:​start|VGA3]] ​ |80×25 or 80×30 text display; operates at VGA frequencies to operate on a greater number of displays than the CVDU (above). Fonts are programmable. Includes an IBM PS/2 keyboard interface. Operates memory-mapped (for SBC-188 MSDOS), or registered access (similar to CVDU). ​ |
 |[[:​boards:​ecb:​dual-sd-card:​start|Dual SD Card]] ​ |A board providing Dual SD Card storage ​ | |[[:​boards:​ecb:​dual-sd-card:​start|Dual SD Card]] ​ |A board providing Dual SD Card storage ​ |
 |[[:​boards:​ecb:​diskio-v3:​start|DiskIO V3]]  |A board providing floppy and IDE storage support ​ | |[[:​boards:​ecb:​diskio-v3:​start|DiskIO V3]]  |A board providing floppy and IDE storage support ​ |
-|[[:​boards:​ecb:​mf-pic:​start|MF/​PIC]] ​ |Multifunction Programmable Interrupt Controller support board required by the ECB Mini-68K CPU and ECB KISS-68030 CPU boards. ​ It may also be used with the SBC v2 (Z80) to provide mode 2 interrupt vectoring. ​ | +|[[:​boards:​ecb:​mf-pic:​start|MF/​PIC]] ​ |Multifunction Programmable Interrupt Controller support board required by the ECB Mini-68K CPU and ECB KISS-68030 CPU boards. It may also be used with the SBC v2 (Z80) to provide mode 2 interrupt vectoring.  | 
-|[[boards:​ecb:​adio:​start|ADIO]] ​ |An Analog/​Digital I/O Board  | +|4MEM  |4MB expanded memory board for SBC-188. Uses EMM4MEM.sys driver. Also expands SBC-188 memory to full 640K. Expanded memory is good for a battery-backed Ramdisk.  | 
-|[[boards:​ecb:​dsky:​start|DSKY]] ​ |A Display Keyboard unit providing a hexidecimal display and numeric input keypad. ​ | +|[[:​boards:​ecb:​adio:​start|4UART]] ​ |Quad high-speed UART interfaces to RS-232 or USB at up to 3Mbps. 2 ports are dedicated to USB; 2 ports are USB or RS-232, selectable. ​ | 
-|[[boards:​ecb:​cassette_intf|Cassette Interface]] ​ |Allows for storage/​retrial of files on cassette tapes using the Kansas City Standard ​ |+|[[:boards:​ecb:​adio:​start|ADIO]] ​ |An Analog/​Digital I/O Board  | 
 +|[[:boards:​ecb:​dsky:​start|DSKY]] ​ |A Display Keyboard unit providing a hexidecimal display and numeric input keypad. ​ | 
 +|[[:boards:​ecb:​cassette_intf:start|Cassette Interface]] ​ |Allows for storage/​retrial of files on cassette tapes using the Kansas City Standard ​ | 
 +|[[:​boards:​ecb:​usb-fifo:​start|USB FIFO]] ​ |A EuroCard Bus board providing a fast interface between ECB machines and modern PCs over USB.  | 
 +|[[:​boards:​ecb:​scg:​start|SCG]] ​ |The "​Sprite Color Graphics"​ is an ECB video display board based on the TMS9918 which features color graphics and sprite management. Board also includes AY-3-8910 sound support and dual joystick support. ​ | 
 + 
 +\\ 
  
 ===== ECB Accessory Cards ===== ===== ECB Accessory Cards =====
Line 58: Line 74:
  
 ===== ECB Board I/O Port Guidelines ===== ===== ECB Board I/O Port Guidelines =====
 +
 <​code>​ <​code>​
 00..07 4 x 4MEM boards 00..07 4 x 4MEM boards
 08..09 Dual SD card 08..09 Dual SD card
 +0C..0F ECB USB FIFO
 20..3F IDE & Floppy controllers (DiskI/O, Dual IDE) 20..3F IDE & Floppy controllers (DiskI/O, Dual IDE)
 40..7F Z180 Mark IV internal registers 40..7F Z180 Mark IV internal registers
Line 68: Line 86:
 80..8F Z180 Mark IV on-board peripherals 80..8F Z180 Mark IV on-board peripherals
 80..9F N8 Home Computer on-board peripherals 80..9F N8 Home Computer on-board peripherals
 +98..9F SCG graphics (same as N8)
 A0..A7 2 x RAM-Floppy cards A0..A7 2 x RAM-Floppy cards
 A8..AF PropI/O A8..AF PropI/O
-E0..EF ​VDU & CVDU+C0..DF 4UART 
 +E0..EF CVDU 
 +E0..E7 VGA3
 F0..FF reserved for experimental boards F0..FF reserved for experimental boards
 +F0..F3 VDU (wired port)
 </​code>​ </​code>​
  
 Downloadable:​ {{:​boards:​ecb:​board_ports.pdf|Board_Ports.pdf}} Downloadable:​ {{:​boards:​ecb:​board_ports.pdf|Board_Ports.pdf}}
- 
- 
  
  
boards/ecb/start.1467830757.txt.gz · Last modified: 2016/07/06 14:45 by admin
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0