Differences

This shows you the differences between two versions of the page.

--- boards:ecb:ramfloppy:start [2018/09/27 09:46]
b1ackmai1er [Jumper S3:]
+++ boards:ecb:ramfloppy:start [2018/09/27 10:11]
b1ackmai1er [Software Support]
@@ Line 474: / Line 474: @@
 </code>
-Test software can be found here: {{:boards:ecb:ramfloppy:firmware:raf113.zip|:boards:ecb:ramfloppy:firmware:raf113.zip}}
+Before use the RAM floppy needs to be initialized with the CLRDIR.COM command. Ensure the Write Protect switch is turned off.
+<code>
+RetroBrew HBIOS v2.9.1-pre.6, 2018-09-27
+...
+RF: IO=0xA0 DEVICES=1 WP=OFF
+...
+Unit        Device      Type              Capacity/Mode
+----------  ----------  ----------------  --------------------
+...
+Disk 4      RF0:        RAM Floppy        4MB,LBA
+...
+Configuring Drives...
+...
+E:=RAMF0:0
+...
+CP/M-80 v2.2, 54.0K TPA
+B>CLRDIR E:
+CLRDIR V-0.4 (06-Aug-2012) by Max Scane
+Warning - this utility will overwite the directory sectors of Drive: E:
+Type Y to proceed any key other key to exit. Y
+Directory cleared.
+**B>**
+</code> Test software can be found here: {{:boards:ecb:ramfloppy:firmware:raf113.zip|:boards:ecb:ramfloppy:firmware:raf113.zip}}