This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
The RBC ECB prototyping board is a device for builders to make their own peripheral boards. The ECB prototyping board has a large unallocated PTH area for wire wrap or point to point circuit construction. The ECB prototyping board implements ECB address, data, and control buffering and some IO port decoding logic to aid in the development of ECB bus peripherals. Many RBC projects have started as ECB prototyping boards and it is is helpful for rapid prototyping.
Current Version: "002"
Manufacturing Files: Gerber files were not on the old wiki
KiCAD Files: ecb_protoboard_with_io_decode-002.zip