This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
The ECB Backplane-8 167 mm is a backplane card for the EuroCard Bus which allows up to 8 ECB cards to be connected at one time.
Current Version: 167mm 201506
Manufacturing Files: Files were not on the old wiki
KiCAD Files: ecb_backplane-201506.zip
REF: ECB Backplane-201506.zip (Kicad files)
Suggestion: Add electrolytic decoupling capacitors to the backplane. Four 220uF caps show in the photos, although anything from 100-470uF would be good. Choose the caps for their low height so they do not interfere with board insertion. Polarity on the board is not marked, so be extra cautious about orienting them correctly. (Board bottom is VCC, top is GND.)
Changes to 167mm 201506 version:
John Coffman 23-Jun-2015
REF: ECB Backplane-007.zip
These are the Kicad files for the N8VEM 8-slot backplane. Previous versions of the backplane were manufactured on thick 1/8" PCB stock.
Changes to version 7:
John Coffman 26-Apr-2014
Please use this space to add any notes/comments on this board that don't fit into the above sections. (Periodically, these comments may be re-arranged to be better incorporated into a new revision of the wiki page.) Please sign your comments using the wiki "Insert Signature" feature! — Andrew Bingham 2016/02/27 13:01