This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
The ECB Mini Backplane is a backplane card for the EuroCard Bus which allows up to 3 ECB cards to be connected at one time. It features a power input, power switch, LED to indicate when power is on, and a 2-pin input header to connect a reset switch. On the reverse side of the PCB the ECB pins are labelled for quick identification and a key listing the ECB signal names is provided. The board is designed to be used either standing up or lying on its side with the backplane connectors and power switch above the ECB cards.
The PCBs are manufactured using 2.0mm thick FR4 with ENIG finish.
Make sure you fit the ECB sockets the correct way round! See the photographs if unsure. Ensure any electrolytic capacitors are fitted with the correct polarity (marked on the board). The power switch is optional and can be omitted simply by fitting a (reasonably thick) wire jumper in its place.