Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boardinventory [2019/12/02 13:39]
jordi.solis [Omega Home Computer Project (Sergey Kiselev)]
boardinventory [2020/07/03 07:54] (current)
tgoodman [S-100 Bus Boards]
Line 10: Line 10:
  
 ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes| ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
-|Zeta SBC PCB|  10  |  $15  |Todd Goodman| ​  | +|Zeta SBC PCB|  10  |  $ |Todd Goodman| ​  | 
-|Zeta SBC V2 PCB|  20  |  $20  |Todd Goodman| | +|Zeta SBC V2 PCB|  20  |  $10  |Todd Goodman| | 
-|ParPortProp PCB|  20  |  $20  |Todd Goodman| |+|ParPortProp PCB|  20  |  $10  |Todd Goodman| |
 |SST39SF040 (512 KiB Flash)| ​ 8  |  $4  |Sergey Kiselev|Can be preprogrammed with the firmware of your choice| |SST39SF040 (512 KiB Flash)| ​ 8  |  $4  |Sergey Kiselev|Can be preprogrammed with the firmware of your choice|
- 
-\\ 
- 
  
 ==== Omega Home Computer Project (Sergey Kiselev) ==== ==== Omega Home Computer Project (Sergey Kiselev) ====
  
 ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes| ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
-|[[https://​github.com/​skiselev/​omega/​blob/​master/​Keyboard.md|Omega Keyboard PCB Version 1.0]]|  ​ ​| ​ $15  |Sergey Kiselev| ​  | +|[[https://​github.com/​skiselev/​omega/​blob/​master/​Keyboard.md|Omega Keyboard PCB Version 1.1]]|  ​ ​| ​ $15  |Sergey Kiselev| ​  | 
-|[[https://​github.com/​skiselev/​omega/​blob/​master/​Mainboard.md|Omega Main Board PCB Version 1.1]]|  ​ ​| ​ $20  |Sergey Kiselev| ​  | +|[[https://​github.com/​skiselev/​omega/​blob/​master/​Mainboard.md|Omega Main Board PCB Version 1.2]]|  ​ ​| ​ $20  |Sergey Kiselev| ​  | 
-|MSX standard ​cards| ​  ​| ​  | |   | +|MSX interface ​cards| ​  ​| ​  | |   | 
-|[[http://​obsonet.blogspot.com/​|Obsonet network card v1.0]]|  ​ ​| ​ $ ​|Jordi Solis| ​  | +|[[http://​obsonet.blogspot.com/​|Obsonet network card v1.0]]|  ​12  ​| ​ $10  ​|Jordi Solis| ​  | 
- +|[[https://​github.com/​costarc/​MSXPi|MSX-Pi v0.7]]| ​ 3  |  $10  |Jordi Solis| ​  | 
-\\ +|[[https://​github.com/​Wierzbowsky/​MSX_Breadboard_Large|MSX prototype board]]| ​ 3  |  $10  |Jordi Solis| ​  | 
 +|[[https://​github.com/​RBSC/​F4-FMPAC|F4-FMPAC module board]]| ​ 5  |  $5  |Jordi Solis| ​  |
  
 ==== Minimal 8085/Z80 Single Board Computer ==== ==== Minimal 8085/Z80 Single Board Computer ====
Line 34: Line 31:
 |[[:​boards:​sbc:​minimax8085:​start|MiniMax8085]][[:​boards:​sbc:​minimax8085:​start| PCB]]| ​ 5  |  $5 USD  |Phillip Summers ​ |   | |[[:​boards:​sbc:​minimax8085:​start|MiniMax8085]][[:​boards:​sbc:​minimax8085:​start| PCB]]| ​ 5  |  $5 USD  |Phillip Summers ​ |   |
 |[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​ |  2  |  $5 USD  |Phillip Summers|Rienk Koolstra'​s Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design. ​ | |[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​ |  2  |  $5 USD  |Phillip Summers|Rienk Koolstra'​s Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design. ​ |
-|   ​|  ​ ​| ​ $5  |Rienk Koolstra ​ |price includes shipping ​ |+|   ​|  ​ ​| ​ $5  |Rienk Koolstra ​ |price includes shipping ​ |
 |[[https://​github.com/​skiselev/​easy_z80|Easy Z80 V1.1 PCB]]  |2  |$5  |Sergey Kiselev ​ |   | |[[https://​github.com/​skiselev/​easy_z80|Easy Z80 V1.1 PCB]]  |2  |$5  |Sergey Kiselev ​ |   |
-|[[https://​hackaday.io/​project/​168014-rc-z8basic|RC-Z8BASIC]] ​ | |$5 USD  |Phillip Summers ​ |Just4Fun'​s [[https://​www.retrobrewcomputers.org/​forum/​index.php?​t=msg&​th=404&​start=0&​|Z8671 ]]based board. ​ | +|[[https://​hackaday.io/​project/​168014-rc-z8basic|RC-Z8BASIC]] ​ | |$5 USD  |Phillip Summers ​ |Just4Fun'​s [[https://​www.retrobrewcomputers.org/​forum/​index.php?​t=msg&​th=404&​start=0&​|Z8671 ]]based board. ​ | 
- +|[[:​builderpages:​plasmo:​zrcc:​zrcc1_1|ZRCC]] Kit, rev1.1 ​ |5  |20 USD|Bill Shen|22MHz CP/M-ready Z80 SBC, 64meg CF disk included. Shipping is 5 USD in USA only.| 
-\\ +|  [[:​builderpages:​plasmo:​zrcc:​zrcc1|ZRCC rev1.1]] ​ Assembled, tested ​ |2  |45 USD|Bill Shen|Assembled and tested 22MHz CP/M-ready Z80 SBC, 64meg CF disk included. Shipping is 5 USD in USA only.|
  
 ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ==== ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ====
Line 45: Line 41:
 ^**Board** ^**Stock** ^**Price** ^**Order Contact** ^**Notes** | ^**Board** ^**Stock** ^**Price** ^**Order Contact** ^**Notes** |
 |[[:​boards:​sbc:​mpu302|MPU302]]|1|$50|Bill Shen|Pre-programmed and tested with CP/M 68K ver 1.3. Board ready to run.| |[[:​boards:​sbc:​mpu302|MPU302]]|1|$50|Bill Shen|Pre-programmed and tested with CP/M 68K ver 1.3. Board ready to run.|
 +
 +==== CB030, 68030 SBC, 16 Meg Memory, CP/M 68K Ready ====
 +
 +^Board^Stock^Price^Order Contact^Notes|
 +|CB030 Partially assembled|3|$15|Bill Shen|PC board with all SMT components soldered, EPM7128S is soldered and programmed|
 +|[[:​builderpages:​plasmo:​cb030:​cb030_rev1:​pictorial_guide|CB030]] Kit|2|$55|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit. 256meg CF disk included as well as an USB-to-serial adapter.|
 +|[[:​builderpages:​plasmo:​cb030:​cb030_rev1|CB030]] Assembled|2|$75|Bill Shen|Fully assembled and tested CB030 include a 256 meg CF disk and an USB-to-serial adapter.|
  
 ==== Tiny68K, Rev2, 68000 SBC, 16 Meg Memory, CP/M 68K Ready ==== ==== Tiny68K, Rev2, 68000 SBC, 16 Meg Memory, CP/M 68K Ready ====
Line 52: Line 55:
 |Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included| |Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included|
 |Tiny68k_r2 PCB|6|5 USD|Phillip Summers| | |Tiny68k_r2 PCB|6|5 USD|Phillip Summers| |
- 
-\\ 
- 
  
 ==== Multicomp ==== ==== Multicomp ====
Line 62: Line 62:
 |[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cycloneiv.jpg|Muliticomp IV]]  |  9  |  $5  |Rienk Koolstra ​ |price includes shipping – see [[:​builderpages:​rhkoolstar:​start|main page]] ​ | |[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cycloneiv.jpg|Muliticomp IV]]  |  9  |  $5  |Rienk Koolstra ​ |price includes shipping – see [[:​builderpages:​rhkoolstar:​start|main page]] ​ |
  
-\\+==== AVR Based board ====
  
 +^Board^Stock^Price Currency^Order Contact^Notes|
 +|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cpmega88.jpg|CP/​Mega88]] ​ |  9  |  $2  |Rienk Koolstra ​ |AVR implementation of Takashi Toyoshima'​s CP/Mega88 in SMD \\ price includes shipping - see [[:​builderpages:​rhkoolstar:​start|main page]] ​ |
  
-==== AVR Based board ====+==== SBC-85 ​==== 
 + 
 +^**Board** ^**Stock** ^**Price** ^**Location** ^**Order Contact** ^**Notes** | 
 +|**ASSEMBLED** | | | | | | 
 +|SBC CPU v2.0 Assembled|1|$75|USA|Craig Andrews| | 
 +| | | | | | | 
 +|**BARE BOARDS** | | | | | | 
 +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v2.0 -Tin Fingers]]|2|$5|USA|Craig Andrews| | 
 +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cpu-v1-1-1-2-documentation/​|SBC CPU v2.0 - Gold Fingers]]|0|$8|USA|Craig Andrews| | 
 +|[[http://​sbc-85.com/​index.php/​documentation/​backplane-4-documentation/​|Backplane-4 v1.0]]|1|$5|USA|Craig Andrews| | 
 +|[[http://​sbc-85.com/​index.php/​documentation/​sbc-85-cassette-tape-interface-documentation/​|Cassette Interface v1.0]]|3|$3|USA|Craig Andrews| | 
 +|[[https://​hackaday.io/​project/​170832-magnetic-bubble-memory-makes-a-comeback|Bus Monitor Supreme v1.1b]]|0|$5|USA|Craig Andrews|May contain undiscovered bugs so it is still considered to be a prototype| 
 +|[[https://​hackaday.io/​project/​170832-magnetic-bubble-memory-makes-a-comeback|1Mbit 7110A Bubble]]|2|$10|USA|Craig Andrews|May contain undiscovered bugs so it is still considered to be a prototype| 
 +|Protoboard v1.0d|5|$3|USA|Craig Andrews| | 
 + 
 +\\
  
-^Board^Stock^Price Currency^Order Contact^Notes| 
-|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cpmega88.jpg|CP/​Mega88]] ​ |  11  |  $2  |Rienk Koolstra ​ |AVR implementation of Takashi Toyoshima'​s CP/Mega88 in SMD \\ price includes shipping - see [[:​builderpages:​rhkoolstar:​start|main page]] ​ | 
  
 ===== EuroCard ​Bus (ECB) Boards ===== ===== EuroCard ​Bus (ECB) Boards =====
Line 75: Line 90:
 |[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​ 4  |  $15  |Jordi Solis| | |[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​ 4  |  $15  |Jordi Solis| |
 |[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]  |  20  |  $10  |Todd Goodman ​ |   | |[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]  |  20  |  $10  |Todd Goodman ​ |   |
-| |  ​ ​| ​ 10 USD  |Phil Summers| | +| |  ​ ​| ​ 10 USD  |Phil Summers| | 
-|[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  ​20  ​| ​ $20  |Wayne Warthen| |+|[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  ​ ​| ​ $20  |Wayne Warthen| |
 | |  3  |  $15  |Jordi Solis| | | |  3  |  $15  |Jordi Solis| |
-|[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]|  ​11  ​| ​ 20 USD  |John Coffman|167mm version, 1/8" thickness| +|[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]|  ​ ​| ​ 20 USD  |John Coffman|167mm version, 1/8" thickness| 
-|   ​|  ​32  ​| ​  |Rich Cini  |co-stocked for mini-68k ​ | +|   ​|  ​27  ​| ​  |Rich Cini  |co-stocked for mini-68k ​ | 
-|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]|  2  |  $3 USD  |Phil Summers| | +|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]| ​ 50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.| 
-|  50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.| +|[[:​builderpages:​b1ackmai1er:​backplane-4|ECB Mini Backplane (4 slot 10×10)]]|  ​ ​| ​ $5 USD  |Phil Summers| | 
-|[[:​builderpages:​b1ackmai1er:​backplane-4|ECB Mini Backplane (4 slot 10×10)]]|  ​ ​| ​ $5 USD  |Phil Summers| | +|[[:​boards:​sbc:​sbc_v2:​sbc_v2-004|SBC-V2-004v]]| |$10 USD  |Phil Summers|Updated design including reset correction, onboard ide connector, sound, super capacitor, clock divider, rs232-ttl solder jumpers - under development - only 1 board build so far. One minor errata is applicable.|
-|[[:​boards:​sbc:​sbc_v2:​sbc_v2-004|SBC-V2-004v]]| |$10 USD  |Phil Summers|Updated design including reset correction, onboard ide connector, sound, super capacitor, clock divider, rs232-ttl solder jumpers - under development - only 1 board build so far. One minor errata is applicable.|+
 |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003A]]| ​ 4  |  $10 USD  |Phil Summers| ​  \\ Includes the Kontron reset correction.| |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003A]]| ​ 4  |  $10 USD  |Phil Summers| ​  \\ Includes the Kontron reset correction.|
 |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003]] ​ |  2  |  $15  |Jordi Solis  |   | |[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003]] ​ |  2  |  $15  |Jordi Solis  |   |
-|[[:​boards:​sbc:​sbc-188:​start|SBC-188]] ​ |  0  |  $20  |Todd Goodman ​ ​| ​  ​+|[[:​boards:​sbc:​sbc-188:​start|SBC-188 ​v3]]  |  0  |  $25  |John Coffman ​ |4-layer 25mhz respin of the SBC-188 ups memory to 1Mb & adds PPIDE connector. This board is hosted at "​PCBway.com",​ and those outside of the USA are encouraged to order & host the board in their locale.  ​
-  \\ 4MEM  ​| ​  ​|  $20  |   ​| ​  |+|[[:​boards:​sbc:​sbc-188:​start|SBC-188 v3]]  ​| ​ ​9 ​ |  $25  |Richard Edwards ​ |Australia based stock of SBC-188 v3 board. ​ | 
 +|[[:​boards:​sbc:​ns32000|SBC NS32000]] ​ |  9  ​|  $20  ​|John Coffman ​ |Board is hosted at PCBway.com in China. ​ | 
 +|  4MEM  |   ​| ​  |   ​| ​  |
 |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   | |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   |
 |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  15  |  $15  |John Coffman ​ |   | |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  15  |  $15  |John Coffman ​ |   |
-|[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  ​ ​| ​ $10 USD  |Phil Summers ​ |17-10-05 version. ​ |+|[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  ​ ​| ​ $10 USD  |Phil Summers ​ |17-10-05 version. ​ |
 |[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]] ​ |  1  |  ​$10 USD  |Phil Summers ​ |   | |[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]] ​ |  1  |  ​$10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]] ​ |  1  |  $10  |Jordi Solis  |   | |[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]] ​ |  1  |  $10  |Jordi Solis  |   |
-|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v03 (SCGS)]] ​ |  ​ ​| ​ ​10 USD  |Phil Summers ​ |   |+|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v03 (SCGS)]] ​ |  ​ ​| ​ ​10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]] ​ |  20  |  $20  |Todd Goodman ​ |   | |[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]] ​ |  20  |  $20  |Todd Goodman ​ |   |
 |MSX Cartridge reader ​ |   ​| ​ $20  |   ​| ​  | |MSX Cartridge reader ​ |   ​| ​ $20  |   ​| ​  |
 |[[:​boards:​ecb:​dsky:​start|DSKY V2]]  |  5  |  $15  |Jordi Solis  |   | |[[:​boards:​ecb:​dsky:​start|DSKY V2]]  |  5  |  $15  |Jordi Solis  |   |
 |[[:​boards:​ecb:​vdu:​start|ECB VDU]]  |1|  $10 USD  |Phil Summers ​ |   | |[[:​boards:​ecb:​vdu:​start|ECB VDU]]  |1|  $10 USD  |Phil Summers ​ |   |
-|[[:​boards:​ecb:​ramfloppy:​start:​r12|ECB RAM-Floppy R11]]  |4  |10 USD  |Phil Summers ​ |   |+|[[:​boards:​ecb:​ramfloppy:​start:​r12|ECB RAM-Floppy R11]]  |4  |$10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]  |  2  |  Free  |Phil Summers ​ |Note [[:​boards:​ecb:​4pio:​errata|Errata]] with the R03 board. Postage is 2.00 AUD within Australia, $7.50AUD overseas. ​ | |[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]  |  2  |  Free  |Phil Summers ​ |Note [[:​boards:​ecb:​4pio:​errata|Errata]] with the R03 board. Postage is 2.00 AUD within Australia, $7.50AUD overseas. ​ |
 |[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]  |   ​| ​  ​| ​  ​| ​  | |[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]  |   ​| ​  ​| ​  ​| ​  |
-|[[:​boards:​ecb:​mf-pic:​start|ECB MF/PIC (68K Multifunction)]] ​ |  ​29  ​| ​ $20  |Rich Cini  |v3.1-008 (20) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase. ​ | +|[[:​boards:​ecb:​mf-pic:​start|ECB MF/PIC (68K Multifunction)]] ​ |  ​19  ​| ​ $20  |Rich Cini  |v4.0-008 (19) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase. ​ | 
-|[[http://​retrobrewcomputers.org/​​n8vem-pbwiki-archive/​​0/​​35845334/​​48860720/​35269969/​index.htm|ECB Dual IDE with FDC]]  |  ​ ​| ​ $20  |Rich Cini  |v2.0-006 ​ | +|[[http://​retrobrewcomputers.org/​​n8vem-pbwiki-archive/​​0/​​35845334/​​48860720/​35269969/​index.htm|ECB Dual IDE with FDC]]  |  ​ ​| ​ $20  |Rich Cini  |v2.0-006 ​ | 
-|[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]] ​ |  ​ ​| ​ $20  |Rich Cini  |v1.0-001 ​ |+|[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]] ​ |  ​3  |  $20  |Rich Cini  |v1.0-001 ​ | 
 +|[[:​boards:​ecb:​adio:​start|ECB 2S1P Multiport Board]] ​ |  18  ​| ​ $20  |Rich Cini  |v1.0-001 ​ |
 |[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]  |   ​| ​ $20  |   ​| ​  | |[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]  |   ​| ​ $20  |   ​| ​  |
 |[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]] ​ |  1  |  $22  |Jordi Solis  |   | |[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]] ​ |  1  |  $22  |Jordi Solis  |   |
 |ECB Advanced Prototyping ​board ​ |   ​| ​ $20  |   ​| ​  | |ECB Advanced Prototyping ​board ​ |   ​| ​ $20  |   ​| ​  |
-|N8VEM Mini SBC v8  |   ​| ​ ​$20  ​|   ​| ​  | +|N8VEM Mini SBC v8  |   ​| ​  ​|   ​| ​  | 
-|[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]] ​ |  ​28  ​| ​ $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate. ​ | +|[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]] ​ |  ​26  ​| ​ $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate. ​ | 
-|[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]  |  ​14  ​| ​ $20  |Wayne Warthen ​ |   | +|[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]  |  ​ ​| ​ $20  |Wayne Warthen ​ |   | 
-|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]] ​ |  ​10  ​| ​ $25  |John Coffman ​ |4-layer ​board. ​ |+|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]] ​ |  ​ ​| ​ $25  |John Coffman ​ |4-layer ​board. ​ |
 |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   | |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   |
 |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   | |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   |
-|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]] ​ |   ​|   ​| ​  ​  ​+|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]] ​ |0  ​|   |John Coffman  ​|Contact me if interested.  ​
-|[[:​boards:​sbc:​sbc-386ex:​rev2.0|ECB SBC-386EX V2.0]] ​ |  ​ ​| ​ $15 USD  |Phil Summers ​ |   | +|[[:​boards:​sbc:​sbc-386ex:​rev2.0|ECB SBC-386EX V2.0]] ​ |  ​ ​| ​ $15 USD  |Phil Summers ​ |   | 
-|[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]] ​ |  ​1  ​ $10 USD  ​|Phil Summers  ​|   | +|[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]] ​ |   ​  ​  ​|   | 
-|[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]] ​ |  ​20  ​| ​ $25  |Rich Cini  |v1.0-006;​​ requires ​MF/​​PIC ​board ​ |+|[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]] ​ |  ​12  ​| ​ $25  |Rich Cini  |v1.0-006;​​ requires ​MF/​​PIC ​board |
 |[[:​boards:​ecb:​4uart-usb:​start|ECB 4UART-USB]] ​ |  13  |  $20  |John Coffman ​ |   | |[[:​boards:​ecb:​4uart-usb:​start|ECB 4UART-USB]] ​ |  13  |  $20  |John Coffman ​ |   |
 |[[:​boards:​ecb:​usb-fifo:​start|ECB USB FIFO]] ​ |  30  |  $6  |Will Sowerbutts ​ |New stock November 2018. Driver now in ROMWBW. ​ | |[[:​boards:​ecb:​usb-fifo:​start|ECB USB FIFO]] ​ |  30  |  $6  |Will Sowerbutts ​ |New stock November 2018. Driver now in ROMWBW. ​ |
Line 123: Line 140:
 |[[:​boards:​sbc:​65c816_ecb_sbc:​65c816_ecb_sbc|ECB 65c816 SBC]]  |  15  |  $20  |Dan Werner ​ |note the logic family on the board – U6 must be HCT!  | |[[:​boards:​sbc:​65c816_ecb_sbc:​65c816_ecb_sbc|ECB 65c816 SBC]]  |  15  |  $20  |Dan Werner ​ |note the logic family on the board – U6 must be HCT!  |
 |[[:​boards:​ecb:​bus-extender:​start|ECB Bus Extender]] ​ |  4  |  $15  |Richard Edwards ​ |note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)  | |[[:​boards:​ecb:​bus-extender:​start|ECB Bus Extender]] ​ |  4  |  $15  |Richard Edwards ​ |note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)  |
- 
-\\ 
- 
  
 ===== S-100 Bus Boards ===== ===== S-100 Bus Boards =====
Line 137: Line 151:
 |Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  | |Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  |
 |Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   | |Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   |
-|Parallel ASCII Keyboard| ​  ​|  $20  |   ​|   | +|[[http://​www.s100computers.com/​My%20System%20Pages/​IBM%20Keyboard/​IBM%20Keyboard.htm|Parallel ASCII Keyboard ​v02]] ​20  ​|  $20  |Todd Goodman|   | 
-|4MB SRAM|  ​ ​| ​ $20  | |   |+|[[http://​www.s100computers.com/​My%20System%20Pages/​4MG%20Static%20RAM%20Board/​4MG_RAM%20Board.htm|4MB SRAM v01]]|  ​30  ​| ​ $20  |Todd Goodman|   |
 |System Monitor Board - V3|  40  |  $20  |Todd Goodman| ​  | |System Monitor Board - V3|  40  |  $20  |Todd Goodman| ​  |
 |——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  | |——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  |
Line 176: Line 190:
 |MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  | |MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  |
 |16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  | |16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  |
-|8-bit VGA v11|  20  |  $20  |Todd Goodman| ​   |+|8-bit VGA v11|  20  |  $20  |Todd Goodman| ​  ​|
 |Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  | |Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  |
 |Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  | |Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  |
Line 184: Line 198:
 |– FPGA Shield #0|  20  |  $8  |Todd Goodman| ​  | |– FPGA Shield #0|  20  |  $8  |Todd Goodman| ​  |
 |– FPGA Shield #1|  20  |  $8  |Todd Goodman| ​  | |– FPGA Shield #1|  20  |  $8  |Todd Goodman| ​  |
 +|68030 v1.1|  20  |  $20  |Todd Goodman| ​  |
 +|Z-80 FPGA v1.1B| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Mega 328-2560 v1.11| ​ 20  |  $20  |Todd Goodman| ​  |
  
 \\ \\
Line 194: Line 211:
 ^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  | ^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 |Xi 8088 PCB|20|$25|Todd Goodman| ​  | |Xi 8088 PCB|20|$25|Todd Goodman| ​  |
-|ISA Backplane PCB|40|$25|Todd Goodman| ​  |+|ISA Backplane PCB|40|$15|Todd Goodman| ​  |
 |ISA SVGA v1.1 PCB|40|$10|Todd Goodman| ​  | |ISA SVGA v1.1 PCB|40|$10|Todd Goodman| ​  |
 |XT-CF-Lite PCB|30|$12|Todd Goodman| ​  | |XT-CF-Lite PCB|30|$12|Todd Goodman| ​  |
 |ISA OPL2 PCB|40|$10|Todd Goodman| ​  | |ISA OPL2 PCB|40|$10|Todd Goodman| ​  |
 |ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  | |ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  |
-|Micro 8088 PCB|1|$20|Sergey Kiselev|   | +|Micro 8088 PCB|20|$20|Todd Goodman|   | 
-|ISA 8-Bit Backplane PCB|0|$10|Sergey Kiselev|   | +|ISA 8-Bit Backplane PCB|20|$15|Todd Goodman|   |
- +
-\\ +
  
 ===== Other (formerly known as "​Mini"​) Boards ===== ===== Other (formerly known as "​Mini"​) Boards =====
Line 228: Line 242:
 |[[https://​velesoft.speccy.cz/​data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board. ​ | |[[https://​velesoft.speccy.cz/​data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board. ​ |
  
-\\+==== DEC (Digital) Boards (Joerg Hoppe) ====
  
 +^**Board / Component** ​  ​^**Stock** ​  ​^**Price** ​  ​^**Order Contact** ​  ​^**Notes** ​  |
 +|[[http://​retrocmp.com/​projects/​unibone|UniBone PCB]]|20|$60|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​projects/​unibone/​275-unibone-as-disk-emulator|UniBone I2C PCB]]|20|$10|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​tools/​uniprobe|UniProbe PCB]]|20|$40|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​tools/​dec-km11-maintenance-panel|KM11 Maintenance Panel PCB]]|20|$15|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​tools/​unibus-spc-g7273-diagnostics|G7273 Diagnostics/​Grant Continuity PCB]]|20|$20|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​tools/​dec-flip-chip-extenders|DEC Flip-Chip Extender - Single PCB]]|20|$18|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​tools/​dec-flip-chip-extenders|DEC Flip-Chip Extender - Single +5 PCB]]|20|$18|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​tools/​dec-flip-chip-extenders|DEC Flip-Chip Extender - Dual PCB]]|20|$25|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​tools/​dec-flip-chip-extenders|DEC Flip-Chip Extender - Dual +5 PCB]]|20|$25|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​tools/​dec-flip-chip-extenders|DEC Flip-Chip Extender - Quad PCB]]|20|$35|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​tools/​dec-flip-chip-extenders|DEC Flip-Chip Extender - Quad +5 PCB]]|20|$35|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​tools/​dec-flip-chip-extenders|DEC Flip-Chip Extender - Hex PCB]]|20|$42|Todd Goodman| ​  |
 +|[[http://​retrocmp.com/​tools/​dec-flip-chip-extenders|DEC Flip-Chip Extender - Hex +5 PCB]]|20|$42|Todd Goodman| ​  |
 +|--Connectors for Flip-Chip Extenders - ECS PN 2418-13-30 2400 Series Edge Card Connector -  18 contact pairs, .465 tail length, 30u Au|300|$10|Todd Goodman| ​  |
  
 ===== Chips/​Components ===== ===== Chips/​Components =====
Line 243: Line 272:
 |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| | |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| |
 |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| | |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| |
-|John Coffman|johninsd <at> gmail <dot> com|USA|07 Feb 2019|jcoffman| +|John Coffman|johninsd <at> gmail <dot> com|USA|12 May 2020|jcoffman| 
-|Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| |+|Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com|USA|21 Jun 2020|tgoodman|
 |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| | |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| |
 |Sergey Kiselev|skiselev:​gmail/​com (replace ':'​ with '​@'​ and '/'​ with '​.'​)| |28 Jul 2015| | |Sergey Kiselev|skiselev:​gmail/​com (replace ':'​ with '​@'​ and '/'​ with '​.'​)| |28 Jul 2015| |
 |Ed Snider|zippster278 <at> gmail.com| |13 Mar 2018| | |Ed Snider|zippster278 <at> gmail.com| |13 Mar 2018| |
 |Will Sowerbutts|will <at> sowerbutts.com|UK|22 July 2017| | |Will Sowerbutts|will <at> sowerbutts.com|UK|22 July 2017| |
-|Wayne Warthen|wwarthen <at> gmail.com|USA|3 Sep 2015| |+|Wayne Warthen|wwarthen <at> gmail.com|USA|3 Sep 2015|wwarthen|
 |Neil Breeden|nbreeden <at> me.com| |23 May 2014| | |Neil Breeden|nbreeden <at> me.com| |23 May 2014| |
 |Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014| | |Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014| |
Line 257: Line 286:
 |Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| | |Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| |
 |Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| | |Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| |
-|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|6 Nov 2019|[[:​builderpages:​b1ackmai1er:​start|b1ackmai1er]]|+|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|10 Feb 2020|[[:​builderpages:​b1ackmai1er:​start|b1ackmai1er]]|
 |Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 Apr 2019|jdgabbard| |Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 Apr 2019|jdgabbard|
 |Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| | |Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| |
 |Michael Cvetanovski|michael.cvet <at> gmail <dot> com|Aust|16 Nov 2018| | |Michael Cvetanovski|michael.cvet <at> gmail <dot> com|Aust|16 Nov 2018| |
 +|Craig Andrews|craig.andrews <at> tessol - inc <dot> com|USA|19 Mar 2020|Craig|
  
 =====   ===== =====   =====
boardinventory.1575311957.txt.gz · Last modified: 2019/12/02 13:39 by jordi.solis
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0