Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boardinventory [2019/02/07 11:27]
jcoffman [Order Contact Information]
boardinventory [2019/08/23 20:56] (current)
b1ackmai1er [EuroCard ​Bus (ECB) Boards]
Line 18: Line 18:
  
 ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes| ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
-|[[https://​github.com/​skiselev/​omega|Omega Keyboard PCB Version 1.0]]|  ​12  ​| ​ $15  |Sergey Kiselev| ​  |+|[[https://​github.com/​skiselev/​omega|Omega Keyboard PCB Version 1.0]]|  ​ ​| ​ $15  |Sergey Kiselev| ​  | 
 + 
 +\\ 
  
 ==== Minimal 8085/Z80 Single Board Computer ==== ==== Minimal 8085/Z80 Single Board Computer ====
Line 26: Line 29:
 |   ​| ​ 5  |$5 USD  |Phillip Summers ​ |   | |   ​| ​ 5  |$5 USD  |Phillip Summers ​ |   |
 |[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​ |  2  |  $5 USD  |Phillip Summers|Rienk Koolstra'​s Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design. ​ | |[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​ |  2  |  $5 USD  |Phillip Summers|Rienk Koolstra'​s Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design. ​ |
-|   ​|  ​ ​| ​ $5  |Rienk Koolstra ​ |price includes shipping ​ | +|   ​|  ​ ​| ​ $5  |Rienk Koolstra ​ |price includes shipping ​ | 
-  ​  ​  ​  ​|   |+|[[https://​github.com/​skiselev/​easy_z80|Easy Z80 V1.1 PCB]]  ​|7  ​|$5  |Sergey Kiselev  ​|   | 
 + 
 +\\ 
  
 ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ==== ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ====
Line 39: Line 45:
 |[[:​boards:​sbc:​tiny68k:​tiny68k_rev2|Tiny68K]],​ rev2|1|$50|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included| |[[:​boards:​sbc:​tiny68k:​tiny68k_rev2|Tiny68K]],​ rev2|1|$50|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included|
 |Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included| |Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included|
-|Tiny68k_r2 PCB|7|5 USD|Phillip Summers|Silver plated edge connectors only.|+|Tiny68k_r2 PCB|6|5 USD|Phillip Summers| | 
 + 
 +\\ 
  
 ==== Multicomp ==== ==== Multicomp ====
  
 ^Board^Stock^Price Currency^Order Contact^Notes| ^Board^Stock^Price Currency^Order Contact^Notes|
-|[[:​boards:​sbc:​multicomp:​cycloneii-c:​start|Multicomp IIc]]  |  ​ ​| ​ $5 USA  ​|Phillip Summers ​ |v1.10 boards ​ |+|[[:​boards:​sbc:​multicomp:​cycloneii-c:​start|Multicomp IIc]]  |  ​ ​| ​ $5 USD  ​|Phillip Summers ​ |v1.10 boards ​ |
 |[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cycloneiv.jpg|Muliticomp IV]]  |  0  |  $5  |Rienk Koolstra ​ |price includes shipping – see [[:​builderpages:​rhkoolstar:​start|main page]] ​ | |[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cycloneiv.jpg|Muliticomp IV]]  |  0  |  $5  |Rienk Koolstra ​ |price includes shipping – see [[:​builderpages:​rhkoolstar:​start|main page]] ​ |
 +
 +\\
 +
  
 ==== AVR Based board ==== ==== AVR Based board ====
Line 55: Line 67:
  
 ^Board / Component^Stock^Price Currency^Order Contact^Notes| ^Board / Component^Stock^Price Currency^Order Contact^Notes|
-|[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​  ​|  $20  | | |+|[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​ ​4  ​|  $15  |Jordi Solis| |
 |[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]  |  20  |  $10  |Todd Goodman ​ |   | |[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]  |  20  |  $10  |Todd Goodman ​ |   |
-| |  ​ ​| ​ 10 USD  |Phil Summers| |+| |  ​ ​| ​ 10 USD  |Phil Summers| |
 |[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  20  |  $20  |Wayne Warthen| | |[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  20  |  $20  |Wayne Warthen| |
-| |  ​ ​|  ​12 €  ​|Jordi ​Solís| |+| |  ​ ​|  ​$15  ​|Jordi ​Solis| |
 |[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]| ​ 11  |  20 USD  |John Coffman|167mm version, 1/8" thickness| |[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]| ​ 11  |  20 USD  |John Coffman|167mm version, 1/8" thickness|
 |   ​| ​ 32  |   |Rich Cini  |co-stocked for mini-68k ​ | |   ​| ​ 32  |   |Rich Cini  |co-stocked for mini-68k ​ |
-|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]|  ​ ​|  ​USD  |Phil Summers| |+|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]|  ​ ​|  ​$3 USD  |Phil Summers| |
 | |  50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.| | |  50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.|
-|[[:​builderpages:​b1ackmai1er:​backplane-4|ECB Mini Backplane (4 slot 10×10)]]|  ​ ​| ​ $5  |Phil Summers| | +|[[:​builderpages:​b1ackmai1er:​backplane-4|ECB Mini Backplane (4 slot 10×10)]]|  ​ ​| ​ $5 USD  |Phil Summers| | 
-|[[:​boards:​sbc:​sbc_v2:​start|SBC V2]]|  1  |  10 USD  |Phil Summers| | +|[[:​boards:​sbc:​sbc_v2:​sbc_v2-004|SBC-V2-004v]]| |$10 USD  |Phil Summers|Updated design including reset correction, onboard ide connector, sound, super capacitor, clock divider, rs232-ttl solder jumpers - under development - only board build so far. One minor errata is applicable.| 
-  ​|  ​ ​|  ​12 €  ​|Jordi Solis  |   |+|[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003A]]| ​ 5  ​|  ​$10 USD  |Phil Summers| ​  \\ Includes the Kontron reset correction.
 +|[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003]] ​ |  2  ​|  ​$15  ​|Jordi Solis  |   |
 |[[:​boards:​sbc:​sbc-188:​start|SBC-188]] ​ |  0  |  $20  |Todd Goodman ​ |   | |[[:​boards:​sbc:​sbc-188:​start|SBC-188]] ​ |  0  |  $20  |Todd Goodman ​ |   |
-|4MEM  |   ​| ​ $20  |   ​| ​  |+  \\ 4MEM  |   ​| ​ $20  |   ​| ​  |
 |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   | |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   |
 |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  15  |  $15  |John Coffman ​ |   | |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  15  |  $15  |John Coffman ​ |   |
-|[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]] ​ |  ​ ​| ​ ​10 USD  |Phil Summers ​ |   | +|[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $10 USD  |Phil Summers ​ |17-10-05 version. ​ | 
-|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]] ​ |  1  |  ​12 €  ​|Jordi ​Solís ​ ​| ​  |+|[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]] ​ |  ​ ​| ​ ​$10 USD  |Phil Summers ​ |   | 
 +|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]] ​ |  1  |  ​$10  ​|Jordi ​Solis  ​| ​  |
 |[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v03 (SCGS)]] ​ |  3  |  ​10 USD  |Phil Summers ​ |   | |[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v03 (SCGS)]] ​ |  3  |  ​10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]] ​ |  20  |  $20  |Todd Goodman ​ |   | |[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]] ​ |  20  |  $20  |Todd Goodman ​ |   |
 |MSX Cartridge reader ​ |   ​| ​ $20  |   ​| ​  | |MSX Cartridge reader ​ |   ​| ​ $20  |   ​| ​  |
-|[[:​boards:​ecb:​dsky:​start|DSKY V2]]  |   ​|  $20  ​| ​  ​|   | +|[[:​boards:​ecb:​dsky:​start|DSKY V2]]  |  ​5  ​|  $15  |Jordi Solis  ​|   | 
-|[[:​boards:​ecb:​vdu:​start|VDU]] ​ |5|  10 USD  |Phil Summers ​ |   | +|[[:​boards:​ecb:​vdu:​start|VDU]] ​ |1|  ​$10 USD  |Phil Summers ​ |   | 
-|[[:​boards:​ecb:​ramfloppy:​start:​r12|ECB RAM-Floppy R11]]  | |10 USD  |Phil Summers ​ |   |+|[[:​boards:​ecb:​ramfloppy:​start:​r12|ECB RAM-Floppy R11]]  | |10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]  |  2  |  Free  |Phil Summers ​ |Note [[:​boards:​ecb:​4pio:​errata|Errata]] with the R03 board. Postage is 2.00 AUD within Australia, $7.50AUD overseas. ​ | |[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]  |  2  |  Free  |Phil Summers ​ |Note [[:​boards:​ecb:​4pio:​errata|Errata]] with the R03 board. Postage is 2.00 AUD within Australia, $7.50AUD overseas. ​ |
 |[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]  |   ​| ​  ​| ​  ​| ​  | |[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]  |   ​| ​  ​| ​  ​| ​  |
Line 85: Line 99:
 |[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]] ​ |  4  |  $20  |Rich Cini  |v1.0-001 ​ | |[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]] ​ |  4  |  $20  |Rich Cini  |v1.0-001 ​ |
 |[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]  |   ​| ​ $20  |   ​| ​  | |[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]  |   ​| ​ $20  |   ​| ​  |
-|[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]] ​ |  1  |  $22  |Jordi ​Solís ​ ​| ​  |+|[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]] ​ |  1  |  $22  |Jordi ​Solis  ​| ​  |
 |ECB Advanced Prototyping ​board ​ |   ​| ​ $20  |   ​| ​  | |ECB Advanced Prototyping ​board ​ |   ​| ​ $20  |   ​| ​  |
 |N8VEM Mini SBC v8  |   ​| ​ $20  |   ​| ​  | |N8VEM Mini SBC v8  |   ​| ​ $20  |   ​| ​  |
Line 93: Line 107:
 |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   | |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   |
 |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   | |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   |
-|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]] ​ |  ​7  ​ $15 USD  ​|Phil Summers  ​|   | +|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]] ​ |   ​  ​  ​|   | 
-|[[:​boards:​sbc:​sbc-386ex:​rev2.0|ECB SBC-386EX V2.0]] ​ |  ​ ​| ​ $15 USD  |Phil Summers ​ |   | +|[[:​boards:​sbc:​sbc-386ex:​rev2.0|ECB SBC-386EX V2.0]] ​ |  ​ ​| ​ $15 USD  |Phil Summers ​ |   | 
-|[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]] ​ |  ​ ​| ​ 10 USD  |Phil Summers ​ |   |+|[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]] ​ |  ​ ​|  ​$10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]] ​ |  20  |  $25  |Rich Cini  |v1.0-006;​​ requires ​MF/​​PIC ​board ​ | |[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]] ​ |  20  |  $25  |Rich Cini  |v1.0-006;​​ requires ​MF/​​PIC ​board ​ |
 |[[:​boards:​ecb:​4uart-usb:​start|ECB 4UART-USB]] ​ |  13  |  $20  |John Coffman ​ |   | |[[:​boards:​ecb:​4uart-usb:​start|ECB 4UART-USB]] ​ |  13  |  $20  |John Coffman ​ |   |
Line 112: Line 126:
 |Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  | |Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  |
 |Buffered Prototyping Board v3.0a| ​ 20  |  $20  |Todd Goodman ​ |   | |Buffered Prototyping Board v3.0a| ​ 20  |  $20  |Todd Goodman ​ |   |
-|Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $20  |Josh Bensadon| ​  |+| |  4  |  $20  |Jordi Solis  |   | 
 +|Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $25  |Josh Bensadon ​(in Canada), Todd Goodman (elsewhere)|   |
 |Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  | |Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  |
 |Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  | |Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  |
 |Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   | |Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   |
 |Parallel ASCII Keyboard| ​  ​| ​ $20  |   ​| ​  | |Parallel ASCII Keyboard| ​  ​| ​ $20  |   ​| ​  |
-|4MB SRAM|  ​18  ​| ​ $20  |Gary Kaufman|   |+|4MB SRAM|  ​ ​| ​ $20  | |   |
 |System Monitor Board - V3|  40  |  $20  |Todd Goodman| ​  | |System Monitor Board - V3|  40  |  $20  |Todd Goodman| ​  |
 |——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  | |——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman| ​  |
Line 153: Line 168:
 |PDP11 CPU v2|  20  |  $20  |Todd Goodman| ​  | |PDP11 CPU v2|  20  |  $20  |Todd Goodman| ​  |
 |PDP11 Support v1.01| ​ 20  |  $20  |Todd Goodman| ​  | |PDP11 Support v1.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  |
 +|16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  |
 +|Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  |
 +|Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  |
 +|CCS-2422E| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Bus Display| ​ 60  |  $20  |Todd Goodman| ​  |
 +
 +\\
 +
  
 ===== ISA Bus Boards ===== ===== ISA Bus Boards =====
Line 165: Line 189:
 |ISA OPL2 PCB|40|$10|Todd Goodman| ​  | |ISA OPL2 PCB|40|$10|Todd Goodman| ​  |
 |ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  | |ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  |
-|Micro 8088 PCB|5|$20|Sergey Kiselev| ​  | +|Micro 8088 PCB|9|$20|Sergey Kiselev| ​  | 
-|ISA 8-Bit Backplane PCB|28|$10|Sergey Kiselev| ​  |+|ISA 8-Bit Backplane PCB|6|$10|Sergey Kiselev| ​  | 
 + 
 +\\ 
  
 ===== Other (formerly known as "​Mini"​) Boards ===== ===== Other (formerly known as "​Mini"​) Boards =====
Line 179: Line 206:
 |XT-IDE (ISA Bus)|0|$12|Todd Goodman|Not sure about reordering, new version created by someone on VCF  | |XT-IDE (ISA Bus)|0|$12|Todd Goodman|Not sure about reordering, new version created by someone on VCF  |
 |XT-FDC|40|$12|Todd Goodman| ​  | |XT-FDC|40|$12|Todd Goodman| ​  |
-|MSX EPROM Cartridge| ​  ​|$5| ​  ​| ​  |+|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​37113829/​index.htm|MSX EPROM Cartridge]]|   ​|$5| ​  ​| ​  |
 |Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  | |Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  |
-|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]|  ​\\   \\ 8|  5 € \\   \\ 5|  Jordi Solís ​\\   \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf]] ​ |+|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]|  ​\\   \\ 8|  5 € \\   \\ 5|  Jordi Solis \\   \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf]] ​ |
 |CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  | |CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  |
 |[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ | |[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ |
 |[[:​builderpages:​plasmo:​z280rc|Z280RC]],​ Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software ​ | |[[:​builderpages:​plasmo:​z280rc|Z280RC]],​ Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software ​ |
-|MC14500 board|9|$5|Richard Edwards|1bit "​CPU"​ board. ​ |+|MC14500 board|7|$5|Richard Edwards|1bit "​CPU"​ board. ​ |
 |KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ | |KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ |
 |SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ | |SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ |
 +
 +\\
 +
  
 ===== Chips/​Components ===== ===== Chips/​Components =====
Line 215: Line 245:
 |Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| | |Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| |
 |Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| | |Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| |
-|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|6 Feb 2019|[[:​builderpages:​b1ackmai1er:​start|b1ackmai1er]]| +|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|13 Aug 2019|[[:​builderpages:​b1ackmai1er:​start|b1ackmai1er]]| 
-|Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 ​Jun 2018| |+|Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 ​Apr 2019|jdgabbard|
 |Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| | |Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| |
 |Michael Cvetanovski|michael.cvet <at> gmail <dot> com|Aust|16 Nov 2018| | |Michael Cvetanovski|michael.cvet <at> gmail <dot> com|Aust|16 Nov 2018| |
boardinventory.1549556839.txt.gz · Last modified: 2019/02/07 11:27 by jcoffman
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0