Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boardinventory [2019/01/14 02:36]
rhkoolstar [Multicomp]
boardinventory [2019/06/16 15:44] (current)
tgoodman [S-100 Bus Boards]
Line 13: Line 13:
 |Zeta SBC V2 PCB|  20  |  $20  |Todd Goodman| | |Zeta SBC V2 PCB|  20  |  $20  |Todd Goodman| |
 |ParPortProp PCB|  20  |  $20  |Todd Goodman| | |ParPortProp PCB|  20  |  $20  |Todd Goodman| |
-|SST39SF040 (512 KiB Flash)|  ​ ​| ​ $4  |Sergey Kiselev|Can be preprogrammed with the firmware of your choice|+|SST39SF040 (512 KiB Flash)|  ​ ​| ​ $4  |Sergey Kiselev|Can be preprogrammed with the firmware of your choice| 
 + 
 +==== Omega Home Computer Project (Sergey Kiselev) ==== 
 + 
 +^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes| 
 +|[[https://​github.com/​skiselev/​omega|Omega Keyboard PCB Version 1.0]]| ​ 9  |  $15  |Sergey Kiselev| ​  | 
 + 
 +\\ 
  
 ==== Minimal 8085/Z80 Single Board Computer ==== ==== Minimal 8085/Z80 Single Board Computer ====
Line 21: Line 29:
 |   ​| ​ 5  |$5 USD  |Phillip Summers ​ |   | |   ​| ​ 5  |$5 USD  |Phillip Summers ​ |   |
 |[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​ |  2  |  $5 USD  |Phillip Summers|Rienk Koolstra'​s Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design. ​ | |[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​ |  2  |  $5 USD  |Phillip Summers|Rienk Koolstra'​s Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design. ​ |
-|   ​|  ​ ​| ​ $5  |Rienk Koolstra ​ |price includes shipping ​ |+|   ​|  ​ ​| ​ $5  |Rienk Koolstra ​ |price includes shipping ​ |
 |   ​| ​  ​| ​  ​| ​  ​| ​  | |   ​| ​  ​| ​  ​| ​  ​| ​  |
 +
 +\\
 +
  
 ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ==== ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ====
Line 34: Line 45:
 |[[:​boards:​sbc:​tiny68k:​tiny68k_rev2|Tiny68K]],​ rev2|1|$50|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included| |[[:​boards:​sbc:​tiny68k:​tiny68k_rev2|Tiny68K]],​ rev2|1|$50|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included|
 |Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included| |Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included|
-|Tiny68k_r2 PCB|7|5 USD|Phillip Summers|Silver plated edge connectors only.|+|Tiny68k_r2 PCB|6|5 USD|Phillip Summers| | 
 + 
 +\\ 
  
 ==== Multicomp ==== ==== Multicomp ====
  
 ^Board^Stock^Price Currency^Order Contact^Notes| ^Board^Stock^Price Currency^Order Contact^Notes|
-|[[:​boards:​sbc:​multicomp:​cycloneii-c:​start|Multicomp IIc]]  |  ​ ​| ​ $5 USA  |Phillip Summers ​ |v1.10 boards ​ |+|[[:​boards:​sbc:​multicomp:​cycloneii-c:​start|Multicomp IIc]]  |  ​ ​| ​ $5 USA  |Phillip Summers ​ |v1.10 boards ​ |
 |[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cycloneiv.jpg|Muliticomp IV]]  |  0  |  $5  |Rienk Koolstra ​ |price includes shipping – see [[:​builderpages:​rhkoolstar:​start|main page]] ​ | |[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cycloneiv.jpg|Muliticomp IV]]  |  0  |  $5  |Rienk Koolstra ​ |price includes shipping – see [[:​builderpages:​rhkoolstar:​start|main page]] ​ |
  
Line 53: Line 67:
  
 ^Board / Component^Stock^Price Currency^Order Contact^Notes| ^Board / Component^Stock^Price Currency^Order Contact^Notes|
-|[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​  ​|  $20  | | |+|[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​ ​4  ​|  $15  |Jordi Solis| |
 |[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]  |  20  |  $10  |Todd Goodman ​ |   | |[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]  |  20  |  $10  |Todd Goodman ​ |   |
-| |  ​ ​| ​ 10 USD  |Phil Summers| |+| |  ​ ​| ​ 10 USD  |Phil Summers| |
 |[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  20  |  $20  |Wayne Warthen| | |[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  20  |  $20  |Wayne Warthen| |
-| |  ​ ​|  ​12 €  ​|Jordi ​Solís| |+| |  ​ ​|  ​$15  ​|Jordi ​Solis| |
 |[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]| ​ 11  |  20 USD  |John Coffman|167mm version, 1/8" thickness| |[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]| ​ 11  |  20 USD  |John Coffman|167mm version, 1/8" thickness|
 |   ​| ​ 32  |   |Rich Cini  |co-stocked for mini-68k ​ | |   ​| ​ 32  |   |Rich Cini  |co-stocked for mini-68k ​ |
-|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]|  ​ ​|  ​USD  |Phil Summers| |+|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]|  ​ ​|  ​$3 USD  |Phil Summers| |
 | |  50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.| | |  50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.|
-|[[:​builderpages:​b1ackmai1er:​backplane-4|ECB Mini Backplane (4 slot 10×10)]]|  ​ ​| ​ $5  |Phil Summers| | +|[[:​builderpages:​b1ackmai1er:​backplane-4|ECB Mini Backplane (4 slot 10×10)]]|  ​10  ​| ​ $5 USD  |Phil Summers| | 
-|[[:​boards:​sbc:​sbc_v2:​start|SBC V2]]|  ​ ​| ​ 10 USD  |Phil Summers| | +|[[:​boards:​sbc:​sbc_v2:​sbc_v2-004|SBC-V2-004q]]|  ​ ​|  ​$10 USD  |Phil Summers|Updated design including reset correction, onboard ide connector, sound and super capacitor.
-  ​|  5  |  ​12 €  ​|Jordi Solis  |   |+|[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003A]]|  5  |  ​$10 USD  |Phil Summers| ​  \\ Includes the Kontron reset correction.| 
 +|[[:​boards:​sbc:​sbc_v2:​start|SBC V2-003]] ​ |  2  |  $15  ​|Jordi Solis  |   |
 |[[:​boards:​sbc:​sbc-188:​start|SBC-188]] ​ |  0  |  $20  |Todd Goodman ​ |   | |[[:​boards:​sbc:​sbc-188:​start|SBC-188]] ​ |  0  |  $20  |Todd Goodman ​ |   |
-|4MEM  |   ​| ​ $20  |   ​| ​  |+  \\ 4MEM  |   ​| ​ $20  |   ​| ​  |
 |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   | |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  4  |  $15  |Ewout Ros  |   |
-|[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  ​16  ​| ​ $15  |John Coffman ​ |   | +|[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping ​Board III]]  |  ​15  ​| ​ $15  |John Coffman ​ |   | 
-|[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]] ​ |  ​ ​| ​ ​10 USD  |Phil Summers ​ |   | +|[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]] ​ |  ​ ​| ​ ​$10 USD  |Phil Summers ​ |   | 
-|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]] ​ |  1  |  ​12 €  ​|Jordi ​Solís ​ ​| ​  |+|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]] ​ |  1  |  ​$10  ​|Jordi ​Solis  ​| ​  |
 |[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v03 (SCGS)]] ​ |  3  |  ​10 USD  |Phil Summers ​ |   | |[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v03 (SCGS)]] ​ |  3  |  ​10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]] ​ |  20  |  $20  |Todd Goodman ​ |   | |[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]] ​ |  20  |  $20  |Todd Goodman ​ |   |
 |MSX Cartridge reader ​ |   ​| ​ $20  |   ​| ​  | |MSX Cartridge reader ​ |   ​| ​ $20  |   ​| ​  |
-|[[:​boards:​ecb:​dsky:​start|DSKY V2]]  |   ​|  $20  ​| ​  ​|   | +|[[:​boards:​ecb:​dsky:​start|DSKY V2]]  |  ​5  ​|  $15  |Jordi Solis  ​|   | 
-|[[:​boards:​ecb:​vdu:​start|VDU]] ​ |5|  10 USD  |Phil Summers ​ |   |+|[[:​boards:​ecb:​vdu:​start|VDU]] ​ |3|  ​$10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​ramfloppy:​start:​r12|ECB RAM-Floppy R11]]  |5  |10 USD  |Phil Summers ​ |   | |[[:​boards:​ecb:​ramfloppy:​start:​r12|ECB RAM-Floppy R11]]  |5  |10 USD  |Phil Summers ​ |   |
-|[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]  |  ​ ​|  ​10 USD  |Phil Summers ​ |Note [[:​boards:​ecb:​4pio:​errata|Errata]] with the R03 board. ​ |+|[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]  |  ​ ​|  ​Free  |Phil Summers ​ |Note [[:​boards:​ecb:​4pio:​errata|Errata]] with the R03 board. Postage is 2.00 AUD within Australia, $7.50AUD overseas.  |
 |[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]  |   ​| ​  ​| ​  ​| ​  | |[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]  |   ​| ​  ​| ​  ​| ​  |
 |[[:​boards:​ecb:​mf-pic:​start|ECB MF/PIC (68K Multifunction)]] ​ |  29  |  $20  |Rich Cini  |v3.1-008 (20) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase. ​ | |[[:​boards:​ecb:​mf-pic:​start|ECB MF/PIC (68K Multifunction)]] ​ |  29  |  $20  |Rich Cini  |v3.1-008 (20) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase. ​ |
 |[[http://​retrobrewcomputers.org/​​n8vem-pbwiki-archive/​​0/​​35845334/​​48860720/​35269969/​index.htm|ECB Dual IDE with FDC]]  |  8  |  $20  |Rich Cini  |v2.0-006 ​ | |[[http://​retrobrewcomputers.org/​​n8vem-pbwiki-archive/​​0/​​35845334/​​48860720/​35269969/​index.htm|ECB Dual IDE with FDC]]  |  8  |  $20  |Rich Cini  |v2.0-006 ​ |
 |[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]] ​ |  4  |  $20  |Rich Cini  |v1.0-001 ​ | |[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]] ​ |  4  |  $20  |Rich Cini  |v1.0-001 ​ |
-|[[http://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]  |   ​| ​ $20  |   ​| ​  | +|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]  |   ​| ​ $20  |   ​| ​  | 
-|[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]] ​ |  1  |  $22  |Jordi ​Solís ​ ​| ​  |+|[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]] ​ |  1  |  $22  |Jordi ​Solis  ​| ​  |
 |ECB Advanced Prototyping ​board ​ |   ​| ​ $20  |   ​| ​  | |ECB Advanced Prototyping ​board ​ |   ​| ​ $20  |   ​| ​  |
 |N8VEM Mini SBC v8  |   ​| ​ $20  |   ​| ​  | |N8VEM Mini SBC v8  |   ​| ​ $20  |   ​| ​  |
 |[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]] ​ |  28  |  $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate. ​ | |[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]] ​ |  28  |  $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate. ​ |
 |[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]  |  14  |  $20  |Wayne Warthen ​ |   | |[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]  |  14  |  $20  |Wayne Warthen ​ |   |
-|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]] ​ |  ​18  ​| ​ $25  |John Coffman ​ |4-layer ​board; let me know if you need pre-programmed GAL's.  |+|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]] ​ |  ​10  ​| ​ $25  |John Coffman ​ |4-layer ​board. ​ |
 |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   | |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]] ​ |  20  |  $20  |Todd Goodman ​ |   |
 |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   | |[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]] ​ |  12  |  $20  |John Coffman ​ |   |
-|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]] ​ |  ​8  ​ $15 USD  ​|Phil Summers  ​|   | +|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]] ​ |     ​    ​  ​|   | 
-|[[:​boards:​sbc:​sbc-386ex:​rev2.0|ECB SBC-386EX V2.0]] ​ |  ​ ​| ​ $15 USD  |Phil Summers ​ |   | +|[[:​boards:​sbc:​sbc-386ex:​rev2.0|ECB SBC-386EX V2.0]] ​ |  ​ ​| ​ $15 USD  |Phil Summers ​ |   | 
-|[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]] ​ |  ​ ​| ​ $35  |John Coffman ​ |contact me if you want the Gerber files to manufacture this board  ​|+|[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]] ​ |  ​ ​| ​ $10 USD  |Phil Summers ​ ​| ​  ​|
 |[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]] ​ |  20  |  $25  |Rich Cini  |v1.0-006;​​ requires ​MF/​​PIC ​board ​ | |[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]] ​ |  20  |  $25  |Rich Cini  |v1.0-006;​​ requires ​MF/​​PIC ​board ​ |
 |[[:​boards:​ecb:​4uart-usb:​start|ECB 4UART-USB]] ​ |  13  |  $20  |John Coffman ​ |   | |[[:​boards:​ecb:​4uart-usb:​start|ECB 4UART-USB]] ​ |  13  |  $20  |John Coffman ​ |   |
Line 110: Line 125:
 |Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  | |Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  |
 |Buffered Prototyping Board v3.0a| ​ 20  |  $20  |Todd Goodman ​ |   | |Buffered Prototyping Board v3.0a| ​ 20  |  $20  |Todd Goodman ​ |   |
-|Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $20  |Josh Bensadon| ​  |+|Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $25  |Josh Bensadon ​(in Canada), Todd Goodman (elsewhere)|   |
 |Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  | |Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  |
 |Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  | |Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  |
Line 151: Line 166:
 |PDP11 CPU v2|  20  |  $20  |Todd Goodman| ​  | |PDP11 CPU v2|  20  |  $20  |Todd Goodman| ​  |
 |PDP11 Support v1.01| ​ 20  |  $20  |Todd Goodman| ​  | |PDP11 Support v1.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|MSDOS Support v3a|  20  |  $20  |Todd Goodman| ​  |
 +|16-bit VGA v15a|  20  |  $20  |Todd Goodman| ​  |
 +|Trident Adapter v15a|  20  |  $5  |Todd Goodman| ​  |
 +|Full Size 80486 v15a|  20  |  $36  |Todd Goodman| ​  |
 +|CCS-2422E| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Bus Display| ​ 60  |  $20  |Todd Goodman| ​  |
 +
 +\\
 +
  
 ===== ISA Bus Boards ===== ===== ISA Bus Boards =====
Line 163: Line 187:
 |ISA OPL2 PCB|40|$10|Todd Goodman| ​  | |ISA OPL2 PCB|40|$10|Todd Goodman| ​  |
 |ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  | |ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  |
-|Micro 8088 PCB|5|$20|Sergey Kiselev| ​  | +|Micro 8088 PCB|9|$20|Sergey Kiselev| ​  | 
-|ISA 8-Bit Backplane PCB|28|$10|Sergey Kiselev| ​  |+|ISA 8-Bit Backplane PCB|6|$10|Sergey Kiselev| ​  | 
 + 
 +\\ 
  
 ===== Other (formerly known as "​Mini"​) Boards ===== ===== Other (formerly known as "​Mini"​) Boards =====
  
 ^  **Board / Component** ​   ^  **Stock** ​   ^  **Price** ​   ^  **Order Contact** ​   ^  **Notes** ​   | ^  **Board / Component** ​   ^  **Stock** ​   ^  **Price** ​   ^  **Order Contact** ​   ^  **Notes** ​   |
-|PPIDE| ​  |$5|   ​| ​  |+|[[:​boards:​other:​ppide|PPIDE]]|   | |   ​| ​  |
 |PPISD|20|$5|Todd Goodman| ​  | |PPISD|20|$5|Todd Goodman| ​  |
 |AT2XTKBD|20|$5|Todd Goodman| | |AT2XTKBD|20|$5|Todd Goodman| |
Line 177: Line 204:
 |XT-IDE (ISA Bus)|0|$12|Todd Goodman|Not sure about reordering, new version created by someone on VCF  | |XT-IDE (ISA Bus)|0|$12|Todd Goodman|Not sure about reordering, new version created by someone on VCF  |
 |XT-FDC|40|$12|Todd Goodman| ​  | |XT-FDC|40|$12|Todd Goodman| ​  |
-|MSX EPROM Cartridge| ​  ​|$5| ​  ​| ​  |+|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​37113829/​index.htm|MSX EPROM Cartridge]]|   ​|$5| ​  ​| ​  |
 |Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  | |Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  |
-|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]|  ​\\   \\ 8|  5 € \\   \\ 5|  Jordi Solís ​\\   \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf]] ​ |+|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]|  ​\\   \\ 8|  5 € \\   \\ 5|  Jordi Solis \\   \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf]] ​ |
 |CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  | |CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  |
 |[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ | |[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ |
Line 186: Line 213:
 |KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ | |KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://​obsolescence.wixsite.com/​obsolescence/​kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board. ​ |
 |SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ | |SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://​sites.google.com/​site/​gogleoops/​sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board. ​ |
 +
 +\\
 +
  
 ===== Chips/​Components ===== ===== Chips/​Components =====
Line 199: Line 229:
 |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| | |Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| |
 |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| | |Rich Cini|rich.cini <at> gmail.com| |29 July 2014| |
-|John Coffman|johninsd <at> gmail <dot> com|USA|30 Nov 2018|jcoffman|+|John Coffman|johninsd <at> gmail <dot> com|USA|07 Feb 2019|jcoffman|
 |Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| | |Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| |
 |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| | |Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| |
Line 213: Line 243:
 |Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| | |Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| |
 |Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| | |Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| |
-|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|23 Dec 2018|[[:​builderpages:​b1ackmai1er:​start|b1ackmai1er]]| +|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|1 June 2019|[[:​builderpages:​b1ackmai1er:​start|b1ackmai1er]]| 
-|Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 ​Jun 2018| |+|Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 ​Apr 2019|jdgabbard|
 |Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| | |Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| |
 |Michael Cvetanovski|michael.cvet <at> gmail <dot> com|Aust|16 Nov 2018| | |Michael Cvetanovski|michael.cvet <at> gmail <dot> com|Aust|16 Nov 2018| |
boardinventory.1547451387.txt.gz · Last modified: 2019/01/14 02:36 by rhkoolstar
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0