Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
boardinventory [2018/05/18 00:10]
plasmo
boardinventory [2018/10/20 05:19] (current)
jordi.solis [Other (formerly known as Mini) Boards]
Line 13: Line 13:
 |Zeta SBC V2 PCB|  20  |  $20  |Todd Goodman| | |Zeta SBC V2 PCB|  20  |  $20  |Todd Goodman| |
 |ParPortProp PCB|  20  |  $20  |Todd Goodman| | |ParPortProp PCB|  20  |  $20  |Todd Goodman| |
-|SST39SF040 (512 KiB Flash)|  ​14  ​| ​ $4  |Sergey Kiselev|Can be preprogrammed with the firmware of your choice|+|SST39SF040 (512 KiB Flash)|  ​ ​| ​ $4  |Sergey Kiselev|Can be preprogrammed with the firmware of your choice|
  
 ==== Minimal 8085/Z80 Single Board Computer ==== ==== Minimal 8085/Z80 Single Board Computer ====
  
 ^Board / Component^Stock^Price^Order Contact^Notes| ^Board / Component^Stock^Price^Order Contact^Notes|
-|[[:​boards:​sbc:​minimax8085:​start|MiniMax8085]][[:​boards:​sbc:​minimax8085:​start| PCB]]| ​ 12 \\   \\ 8|  $5|   \\ Sergey Kiselev ​\\   ​\\ Phillip Summers| ​  | +|[[:​boards:​sbc:​minimax8085:​start|MiniMax8085]][[:​boards:​sbc:​minimax8085:​start| PCB]]| ​ 12  |  $5  |Sergey Kiselev ​ ​| ​  ​
-|[[:​builderpages:​rhkoolstar:​sbc-2g-512|]]|7|$5|Phillip Summers|Rienk ​Koolstar's Z80 SBC based on Grant Searle'​s 9 chip breadboard design. ​ |+|   ​| ​ 5  |$5 USD  |Phillip Summers ​ |   | 
 +|[[:​builderpages:​rhkoolstar:​sbc-2g-512|]] ​  ​5  ​ $5 USD  ​|Phillip Summers|Rienk ​Koolstra's Z80 SBC inspired by Grant Searle'​s 9 chip breadboard design. ​ | 
 +|   ​| ​ 8  |  $5  |Rienk Koolstra ​ |price includes shipping ​ | 
 +|   ​| ​  ​| ​  ​| ​  ​| ​  | 
 + 
 +\\ 
  
 ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ==== ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ====
  
 ^**Board** ^**Stock** ^**Price** ^**Order Contact** ^**Notes** | ^**Board** ^**Stock** ^**Price** ^**Order Contact** ^**Notes** |
-|[[:​boards:​sbc:​mpu302|MPU302]]|1|$100|Bill Shen|Pre-programmed and tested with CP/M 68K ver 1.3. Board ready to run.|+|[[:​boards:​sbc:​mpu302|MPU302]]|1|$50|Bill Shen|Pre-programmed and tested with CP/M 68K ver 1.3. Board ready to run.|
  
 ==== Tiny68K, Rev2, 68000 SBC, 16 Meg Memory, CP/M 68K Ready ==== ==== Tiny68K, Rev2, 68000 SBC, 16 Meg Memory, CP/M 68K Ready ====
Line 31: Line 37:
 |[[:​boards:​sbc:​tiny68k:​tiny68k_rev2|Tiny68K]],​ rev2|1|$50|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included| |[[:​boards:​sbc:​tiny68k:​tiny68k_rev2|Tiny68K]],​ rev2|1|$50|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included|
 |Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included| |Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included|
-|Tiny68k_r2 PCB|9|$5|Phillip Summers|Silver plated edge connectors only.|+|Tiny68k_r2 PCB|7|$5|Phillip Summers|Silver plated edge connectors only.|
  
 ==== Multicomp ==== ==== Multicomp ====
  
-^Board^Stock^Price^Order Contact^Notes| +^Board^Stock^Price ​Currency^Order Contact^Notes| 
-|[[:​boards:​sbc:​multicomp:​cycloneii-c:​start|Multicomp IIc]]|9|$5|Phillip Summers|v1.10 ​Protoboards ex dirtypcb.com.|+|[[:​boards:​sbc:​multicomp:​cycloneii-c:​start|Multicomp IIc]]   ​5  ​ $5 USA  ​|Phillip Summers ​ |v1.10 ​boards ​ | 
 +|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cycloneiv.jpg|Muliticomp IV]]  |  4  |  $5  |Rienk Koolstra ​ |price includes shipping – see [[:​builderpages:​rhkoolstar:​start|main page]] ​ | 
 + 
 +==== AVR Based board ==== 
 + 
 +^Board^Stock^Price Currency^Order Contact^Notes| 
 +|[[https://​www.retrobrewcomputers.org/​lib/​exe/​fetch.php?​media=builderpages:​rhkoolstar:​cpmega88.jpg|CP/​Mega88]] ​ |  13  |  $2  |Rienk Koolstra ​ |AVR implementation of Takashi Toyoshima'​s CP/Mega88 in SMD \\ price includes shipping - see [[:​builderpages:​rhkoolstar:​start|main page]] ​ | 
 + 
 +\\ 
  
 ===== EuroCard Bus (ECB) Boards ===== ===== EuroCard Bus (ECB) Boards =====
  
-^Board / Component ​ ^  Stock  ^  Price  ^Order Contact ​ ^Notes ​ |+^Board / Component ​ ^  Stock  ^  Price Currency ​ ​^Order Contact ​ ^Notes ​ |
 |[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​  ​| ​ $20  |   ​| ​  | |[[:​boards:​ecb:​cassette_intf:​start|Cassette Interface]]| ​  ​| ​ $20  |   ​| ​  |
-|[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]|   \\ 20 \\   ​\\ ​ ​| ​  \\ $10 \\   \\ 10  |   \\ Todd Goodman \\   \\ Phil Summers| ​  | +|[[:​boards:​ecb:​diskio-v3:​start|Disk I/O V3]]|   \\ 20 \\   ​\\ ​ ​| ​  \\ $10 \\   \\ 10 USD  ​| ​  \\ Todd Goodman \\   \\ Phil Summers| ​  | 
-|[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  20 \\   ​\\ ​ ​| ​ $20  |Wayne Warthen \\ Jordi Solís| ​  | +|[[:​boards:​ecb:​propio:​start|Prop I/O V2]]|  20 \\   ​\\ ​ ​| ​ $20  |Wayne Warthen \\ Jordi Solís| ​  | 
-|[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]| ​ 11 \\ 32  |  $20 USA  |John Coffman \\ Rich Cini|167mm version \\ co-stocked for mini-68k| +|[[:​boards:​ecb:​backplane-8:​start|ECB Backplane (8 slot)]]| ​ 11 \\ 32  |  $20 USD  |John Coffman \\ Rich Cini|167mm version \\ co-stocked for mini-68k| 
-|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]|  ​ ​| ​ $5  |Phil Summers|(Will Sowerbutts also accumulating orders – will order another batch soon.)| +|[[:​boards:​ecb:​backplane-3:​start|ECB Mini Backplane (3 slot)]]|  ​ ​| ​ $5  |Phil Summers|(Will Sowerbutts also accumulating orders – will order another batch soon.)
-|[[:​boards:​sbc:​sbc_v2:​start|SBC V2]]|  ​ ​| ​ $10  |Phil Summers ​ |   |+|[[:​builderpages:​b1ackmai1er:​backplane-4|ECB Mini Backplane (4 slot 10x10)]]| ​ 8  |  $5 USD  |Phil Summers ​ |   
 +|[[:​boards:​sbc:​sbc_v2:​start|SBC V2]]|  ​ ​| ​ $10 USD  |Phil Summers ​ |   |
 |[[:​boards:​sbc:​sbc-188:​start|SBC-188]]| ​ 0  |  $20  |Todd Goodman| ​  | |[[:​boards:​sbc:​sbc-188:​start|SBC-188]]| ​ 0  |  $20  |Todd Goodman| ​  |
 |4MEM| ​  ​| ​ $20  |   ​| ​  | |4MEM| ​  ​| ​ $20  |   ​| ​  |
 |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping Board III]]| ​ 4 \\ 17  |  $15  |Ewout Ros \\ John Coffman|A new production run has arrived ​ | |[[:​boards:​ecb:​protoboard_iii:​protoboard_iii|Prototyping Board III]]| ​ 4 \\ 17  |  $15  |Ewout Ros \\ John Coffman|A new production run has arrived ​ |
-|[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]]| ​  ​|  $20  ​| ​  ​|   |+|[[:​boards:​ecb:​zilog-peripherals:​start|Zilog Peripherals]]|4  ​|  $10 USD  |Phil Summers  ​|   |
 |[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]]| ​ 1  |  $20  |Jordi Solís ​ |   | |[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v02 (SCGS)]]| ​ 1  |  $20  |Jordi Solís ​ |   |
 +|[[:​boards:​ecb:​scg:​start|Sprites Color Graphics and Sound v03 (SCGS)]]| ​ 4  |  $10 USD  |Phil Summers ​ |   |
 |[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]]| ​ 20  |  $20  |Todd Goodman| ​  | |[[:​boards:​ecb:​bus-monitor:​start|ECB Bus Monitor]]| ​ 20  |  $20  |Todd Goodman| ​  |
 |MSX Cartridge reader| ​  ​| ​ $20  |   ​| ​  | |MSX Cartridge reader| ​  ​| ​ $20  |   ​| ​  |
 |[[:​boards:​ecb:​dsky:​start|DSKY V2]]|   ​| ​ $20  |   ​| ​  | |[[:​boards:​ecb:​dsky:​start|DSKY V2]]|   ​| ​ $20  |   ​| ​  |
 |VDU|   ​| ​ $20  |   ​| ​  | |VDU|   ​| ​ $20  |   ​| ​  |
-|[[:​boards:​ecb:​ramfloppy:​start|ECB RAM-Floppy R11]]|  ​ ​| ​ $24  |Wolfgang Kabatzke|R13 with GAL currently in development. Design is finished, but no production and test+|[[:​boards:​ecb:​ramfloppy:​start|ECB RAM-Floppy R11]]|  ​ ​| ​ $10 USD  |Phil Summers| | 
-|[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]|  ​ ​| ​ $24  |Wolfgang Kabatzke|R03 is redesign of R02 with jumpers, no DIP-switches,​ and optimized Look-ahead-carry-logic,​ not tested yet+|[[:​boards:​ecb:​4pio:​start|ECB 4PIO R03]]|  ​ ​| ​ $10 USD  |Phil Summers|Note [[:​httpswww.retrobrewcomputers.org:​doku.php?​id=boards:​ecb:​4pio:​errata|Errata]] ​with the R03 board.
-|[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]| ​ ​0  ​ ​$24  ​|Wolfgang Kabatzke|R02 actual in test, R03 is redesign of R02 with jumpers, no DIP-switches and error correction ( 5V and GND on 74LS27) and SUB-D9 male connectors like PC|+|[[:​boards:​ecb:​modprn:​start|ECB ModPrn R03]]| ​  ​  ​| | |
 |[[:​boards:​ecb:​mf-pic:​start|ECB MF/PIC (68K Multifunction)]]| ​ 29  |  $20  |Rich Cini|v3.1-008 (20) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase.| |[[:​boards:​ecb:​mf-pic:​start|ECB MF/PIC (68K Multifunction)]]| ​ 29  |  $20  |Rich Cini|v3.1-008 (20) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase.|
 |[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35269969/​index.htm|ECB Dual IDE with FDC]]| ​ 8  |  $20  |Rich Cini|v2.0-006| |[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35269969/​index.htm|ECB Dual IDE with FDC]]| ​ 8  |  $20  |Rich Cini|v2.0-006|
 |[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]]| ​ 4  |  $20  |Rich Cini|v1.0-001| |[[:​boards:​ecb:​adio:​start|ECB A/​D-I/​O]]| ​ 4  |  $20  |Rich Cini|v1.0-001|
 |[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]|   ​| ​ $20  |   ​| ​  | |[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​48860720/​35845601/​index.htm|uPD7220 V2]]|   ​| ​ $20  |   ​| ​  |
-|[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]]|  ​ ​| ​ $25  |Jordi Solís ​ |   |+|[[:​boards:​ecb:​backplane-12:​start|ECB Extended Backplane (12 slot)]]|  ​ ​| ​ $25  |Jordi Solís ​ |   |
 |ECB Advanced Prototyping board| ​  ​| ​ $20  |   ​| ​  | |ECB Advanced Prototyping board| ​  ​| ​ $20  |   ​| ​  |
 |N8VEM Mini SBC v8|   ​| ​ $20  |   ​| ​  | |N8VEM Mini SBC v8|   ​| ​ $20  |   ​| ​  |
 |[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]]| ​ 28  |  $20  |Rich Cini|v2.0-007;​ requires MF/PIC board to operate.| |[[:​boards:​ecb:​mini-68k:​start|ECB Mini-68K]]| ​ 28  |  $20  |Rich Cini|v2.0-007;​ requires MF/PIC board to operate.|
 |[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]|  14  |  $20  |Wayne Warthen| ​  | |[[:​boards:​ecb:​cvdu:​start|ColorVDU V2]]|  14  |  $20  |Wayne Warthen| ​  |
-|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]]| ​ 18  |   \\ $25 USA  |John Coffman|4-layer board; let me know if you need pre-programmed GAL'​s.|+|[[:​boards:​ecb:​vga3:​vga3|ECB VGA3]]| ​ 18  |   \\ $25 USD  |John Coffman|4-layer board; let me know if you need pre-programmed GAL'​s.|
 |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]]| ​ 20  |  $20  |Todd Goodman| ​  | |[[:​boards:​sbc:​n8:​n8|N8 Home Computer (ECB HC3v2)]]| ​ 20  |  $20  |Todd Goodman| ​  |
-|[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]]| ​ 12  |  $20 USA  |John Coffman| ​  | +|[[:​boards:​ecb:​dual-sd-card:​start|ECB Dual SD Card]]| ​ 12  |  $20 USD  |John Coffman| ​  | 
-|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]]| ​ 0  |  $25 USA  |John Coffman|single board computer w/ IDE8 & SDcard|+|[[:​boards:​sbc:​z180_mark_iv:​z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]]| ​ 0  |  $25 USD  |John Coffman|single board computer w/ IDE8 & SDcard|
 |[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]]| ​ 0  |  $35  |John Coffman|contact me if you want the Gerber files to manufacture this board| |[[:​boards:​ecb:​backplane-505-6508:​start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]]| ​ 0  |  $35  |John Coffman|contact me if you want the Gerber files to manufacture this board|
 |[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]]| ​ 20  |  $25  |Rich Cini|v1.0-006;​ requires MF/PIC board| |[[:​boards:​ecb:​kiss-68030:​start|ECB MC68030 CPU & memory (KISS030)]]| ​ 20  |  $25  |Rich Cini|v1.0-006;​ requires MF/PIC board|
-|[[:​boards:​ecb:​4uart-usb:​4-uart-usb|ECB 4UART-USB]]| ​ 13  |  $20 USA  |John Coffman| ​  |+|[[:​boards:​ecb:​4uart-usb:​start|ECB 4UART-USB]]| ​ 13  |  $20 USD  |John Coffman| ​  |
 |[[:​boards:​ecb:​usb-fifo:​start|ECB USB FIFO]]| ​ 3  |  $6  |Will Sowerbutts| | |[[:​boards:​ecb:​usb-fifo:​start|ECB USB FIFO]]| ​ 3  |  $6  |Will Sowerbutts| |
 |[[:​boards:​sbc:​6x0x-atx-6u:​start|ECB 6x0x-ATX-6U]]| ​ 0  |  $20  |Andrew Bingham|May do another run if there is interest.| |[[:​boards:​sbc:​6x0x-atx-6u:​start|ECB 6x0x-ATX-6U]]| ​ 0  |  $20  |Andrew Bingham|May do another run if there is interest.|
Line 80: Line 97:
 |[[:​boards:​sbc:​65c816_ecb_sbc:​65c816_ecb_sbc|ECB 65c816 SBC]]| ​ 15  |  $20  |Dan Werner|note the logic family on the board – U6 must be HCT!| |[[:​boards:​sbc:​65c816_ecb_sbc:​65c816_ecb_sbc|ECB 65c816 SBC]]| ​ 15  |  $20  |Dan Werner|note the logic family on the board – U6 must be HCT!|
 |[[:​boards:​ecb:​bus-extender:​start|ECB Bus Extender]]| ​ 4  |  $15  |Richard Edwards|note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)| |[[:​boards:​ecb:​bus-extender:​start|ECB Bus Extender]]| ​ 4  |  $15  |Richard Edwards|note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)|
 +
 +\\
 +
  
 ===== S-100 Bus Boards ===== ===== S-100 Bus Boards =====
  
 ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes| ^Board / Component^ ​ Stock  ^  Price  ^Order Contact^Notes|
-|Regular Prototyping Board| ​  ​|$20| ​  ​| ​  | +|Regular Prototyping Board| ​  ​| ​ $20  |   ​| ​  | 
-|Buffered Prototyping Board v3.0a| ​ 20  |$20|Todd Goodman ​ |   |+|Buffered Prototyping Board v3.0a| ​ 20  |  $20  |Todd Goodman ​ |   |
 |Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $20  |Josh Bensadon| ​  | |Buffered Prototyping Board Mini Sea of PTH'​s| ​ 30  |  $20  |Josh Bensadon| ​  |
 |Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  | |Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman| ​  |
 |Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  | |Backplane (Antony'​s 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman| ​  |
-|Dual IDE - Version 03a|20 ​ |  $20  |Todd Goodman ​ |   |+|Dual IDE - Version 03a|  20  |  $20  |Todd Goodman ​ |   |
 |Parallel ASCII Keyboard| ​  ​| ​ $20  |   ​| ​  | |Parallel ASCII Keyboard| ​  ​| ​ $20  |   ​| ​  |
 |4MB SRAM|  18  |  $20  |Gary Kaufman| ​  | |4MB SRAM|  18  |  $20  |Gary Kaufman| ​  |
Line 97: Line 117:
 |——HP5082 Display Board for SMB|  20  |  $10  |Todd Goodman| ​  | |——HP5082 Display Board for SMB|  20  |  $10  |Todd Goodman| ​  |
 |Bus Extender - V2|  20  |  $20  |Todd Goodman| ​  | |Bus Extender - V2|  20  |  $20  |Todd Goodman| ​  |
-|RAM & ROM - Version 02  ​|  $20  | |   | +|RAM & ROM - v2.0b ​20  ​|  $20  |Todd Goodman|   | 
-|Serial I/O|   ​|  $20  |   ​|   |+|Serial I/O v3.1 ​20  ​|  $20  |Todd Goodman  ​|   |
 |PIC/​RTC| ​  ​| ​ $20  |   ​| ​  | |PIC/​RTC| ​  ​| ​ $20  |   ​| ​  |
 |IMSAI MPU-A CPU Board (8080A) reproduction of original| ​ 20  |  $30  |Gary Kaufman| | |IMSAI MPU-A CPU Board (8080A) reproduction of original| ​ 20  |  $30  |Gary Kaufman| |
-|Propeller Based Console I/O - Version 02  ​|  $20  |   ​|   |+|Propeller Based Console I/O - v2.51 ​20  ​|  $20  |Todd Goodman  ​|   |
 |Altair 8800 CPU Board (8080A) reproduction of original| ​ 30  |  $30  |Gary Kaufman| ​  | |Altair 8800 CPU Board (8080A) reproduction of original| ​ 30  |  $30  |Gary Kaufman| ​  |
-|68000/​68010 CPU board| ​  ​|  $20  |   ​|   |+|68000/​68010 CPU board v1.03b ​20  ​|  $20  |Todd Goodman  ​|   |
 |8086 Master/​Slave CPU Board| ​ 20  |  $20  |Gary Kaufman| ​  | |8086 Master/​Slave CPU Board| ​ 20  |  $20  |Gary Kaufman| ​  |
 |6502 CPU board| ​ 20  |  $20  |Todd Goodman| ​  | |6502 CPU board| ​ 20  |  $20  |Todd Goodman| ​  |
 +|16MB SRAM - v6.0a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|—- Mezzanine Board for SRAM - V06d|  60  |  $3  |Todd Goodman| ​  |
 |16MB SRAM - V1|  60  |  $15  |Todd Goodman| ​  | |16MB SRAM - V1|  60  |  $15  |Todd Goodman| ​  |
-|—-Mezzanine board for SRAM - V06C|  3  |  $ |Todd Goodman| ​  |+|—-Mezzanine board for SRAM - V06C|  3  |  $ |Todd Goodman| ​  |
 |Parallel I/O Board V2|  20  |  $20  |Todd Goodman| ​  | |Parallel I/O Board V2|  20  |  $20  |Todd Goodman| ​  |
 |Bus Terminator| ​ 20  |  $20  |Todd Goodman| ​  | |Bus Terminator| ​ 20  |  $20  |Todd Goodman| ​  |
Line 116: Line 138:
 |S-100 OPL3 V1|  20  |  $17  |Todd Goodman| ​  | |S-100 OPL3 V1|  20  |  $17  |Todd Goodman| ​  |
 |S-100 V2 MSX2 UTILITY Board| ​ 9  |  $20  |Jordi Solis|Looking for Beta tester ​ | |S-100 V2 MSX2 UTILITY Board| ​ 9  |  $20  |Jordi Solis|Looking for Beta tester ​ |
 +|Z-80 SBC v1.1a| ​ 20  |  $20  |Todd Goodman| ​  |
 +|Z-80 Master v2.01| ​ 20  |  $20  |Todd Goodman| ​  |
 +|ZFDC v1.0b| ​ 20  |  $20  |Todd Goodman| ​  |
 +|8088 Master v2 (Marked "​Version 01" on silkscreen)| ​ 20  |  $20  |Todd Goodman| ​  |
 +|80286 v2|  20  |  $20  |Todd Goodman| ​  |
 +|80386 v2.31| ​ 20  |  $20  |Todd Goodman| ​  |
 +|32/64MB OTT RAM v3.11b| ​ 20  |  $26  |Todd Goodman| ​  |
  
 ===== ISA Bus Boards ===== ===== ISA Bus Boards =====
Line 124: Line 153:
 |Xi 8088 PCB|20|$25|Todd Goodman| ​  | |Xi 8088 PCB|20|$25|Todd Goodman| ​  |
 |ISA Backplane PCB|40|$25|Todd Goodman| ​  | |ISA Backplane PCB|40|$25|Todd Goodman| ​  |
-|ISA SVGA v1.1 PCB|2|$10|Todd Goodman|More on order  ​|+|ISA SVGA v1.1 PCB|40|$10|Todd Goodman| ​  ​|
 |XT-CF-Lite PCB|30|$12|Todd Goodman| ​  | |XT-CF-Lite PCB|30|$12|Todd Goodman| ​  |
 |ISA OPL2 PCB|40|$10|Todd Goodman| ​  | |ISA OPL2 PCB|40|$10|Todd Goodman| ​  |
-|ISA Floppy Disk and Serial Controller PCB|4|$10|Todd Goodman|More on order  ​+|ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman| ​  ​
-|Micro 8088 PCB|25|$20|Sergey Kiselev| ​  | +|Micro 8088 PCB|5|$20|Sergey Kiselev| ​  | 
-|ISA 8-Bit Backplane PCB|18|$10|Sergey Kiselev| ​  |+|ISA 8-Bit Backplane PCB|28|$10|Sergey Kiselev| ​  |
  
 ===== Other (formerly known as "​Mini"​) Boards ===== ===== Other (formerly known as "​Mini"​) Boards =====
Line 144: Line 173:
 |MSX EPROM Cartridge| ​  ​|$5| ​  ​| ​  | |MSX EPROM Cartridge| ​  ​|$5| ​  ​| ​  |
 |Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  | |Zeta/​Z80-2-ECB Prototypes|2|$12|Andrew Bingham| ​  |
-|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]|  ​\\   ​\\ ​\\  \\ 8|  ​\\   \\ 5 \\  \\ 5|  Jordi Solís \\   \\ Doug Gabbard \\  \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable%20logic%20devices%20-%20v1.6.pdf]] ​ |+|[[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​35845334/​38282303/​95749082/​index.htm|Elm GAL Programmer]]|  ​\\   ​\\ ​\\  \\ 8|  ​\\   \\ 5 \\  \\ 5|  Jordi Solís \\   \\ Doug Gabbard \\  \\ Phillip Summers| ​ [[http://​elm-chan.org/​works/​pgal/​report_e.html|http://​elm-chan.org/​works/​pgal/​report_e.html]] ​ \\   ​\\ ​ [[http://​www.retrotechnology.com/​herbs_stuff/​gal.html|http://​www.retrotechnology.com/​herbs_stuff/​gal.html]] \\   ​\\ ​ [[https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable logic devices - v1.6.pdf|https://​retrobrewcomputers.org/​n8vem-pbwiki-archive/​0/​82152589/​Programmable%20logic%20devices%20-%20v1.6.pdf]] ​ |
 |CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  | |CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  |
-|[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$10|Bill Shen|Assembled and tested, CF disk not included. ​ |+|[[:​boards:​other:​idecf2din:​start|CF-IDE daughterboard]] for MPU302|2|$12|Bill Shen|Assembled and tested, CF disk not included. ​ | 
 +|[[:​builderpages:​plasmo:​z280rc|Z280RC]],​ Z280 for RC2014|4|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software ​ | 
 +|MC14500 board|9|$5|Richard Edwards|1bit "​CPU"​ board. ​ | 
 + 
 +\\ 
  
 ===== Chips/​Components ===== ===== Chips/​Components =====
Line 157: Line 191:
 ===== Order Contact Information ===== ===== Order Contact Information =====
  
-^**Contact** ​  ​^**Email** ​  ​^**Locn** ​  ​^**Last Updated** ​  | +^**Contact** ​  ​^**Email** ​  ​^**Locn** ​  ​^**Last Updated**   ​^**Username**   | 
-|Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| +|Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015
-|Rich Cini|rich.cini <at> gmail.com| |29 July 2014| +|Rich Cini|rich.cini <at> gmail.com| |29 July 2014
-|John Coffman USA|johninsd <at> gmail.com| |20 Apr 2018| +|John Coffman USA|johninsd <at> gmail.com| |20 Apr 2018
-|Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017| +|Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017
-|Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| +|Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014
-|Sergey Kiselev|skiselev:​gmail/​com (replace ':'​ with '​@'​ and '/'​ with '​.'​)| |28 Jul 2015| +|Sergey Kiselev|skiselev:​gmail/​com (replace ':'​ with '​@'​ and '/'​ with '​.'​)| |28 Jul 2015
-|Ed Snider|zippster278 <at> gmail.com| |13 Mar 2018| +|Ed Snider|zippster278 <at> gmail.com| |13 Mar 2018
-|Will Sowerbutts|will <at> sowerbutts.com|UK|22 July 2017| +|Will Sowerbutts|will <at> sowerbutts.com|UK|22 July 2017
-|Wayne Warthen|wwarthen <at> gmail.com| |3 Sep 2015| +|Wayne Warthen|wwarthen <at> gmail.com| |3 Sep 2015
-|Neil Breeden|nbreeden <at> me.com| |23 May 2014| +|Neil Breeden|nbreeden <at> me.com| |23 May 2014| | 
-|Wolfgang Kabatzke|dr.wolfgangkabatzke:​online/​de (replace ':'​ with '​@'​ and '/'​ with '​.'​)| |15 Jan 2014+|Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014
-|Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014| +|Ewout Ros|ewout.ros <at> gmail.com| |19 Feb 2017
-|Ewout Ros|ewout.ros <at> gmail.com| |19 Feb 2017| +|Richard Edwards|ecb <at> trick-1 <dot> net|Aust.|5 Jul 2017
-|Richard Edwards|ecb <at> trick-1 <dot> net|Aust.|5 Jul 2017| +|Jordi Solís|jordi.solism <at> gmail <dot> com|Spain|20 Ago 2017
-|Jordi Solís|jordi.solism <at> gmail <dot> com|Spain|20 Ago 2017| +|Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017
-|Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| +|Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017
-|Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| +|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|4 Aug 2018|[[:​builderpages:​b1ackmai1er:​start|b1ackmai1er]]
-|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|10 Mar 2018| +|Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 Jun 2018| | 
-|Doug Gabbard|doug <at> retrodepot <dot> net|USA|29 Jan 2018|+|Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| |
  
 \\ \\
  
  
boardinventory.1526616626.txt.gz · Last modified: 2018/05/18 00:10 by plasmo
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0