Differences

This shows you the differences between two versions of the page.

--- boardinventory [2018/04/27 00:04]
b1ackmai1er [Order Contact Information]
+++ boardinventory [2023/12/26 10:56] (current)
tgoodman [Order Contact Information]
@@ Line 7: / Line 7: @@
 ===== Single Board Computer Boards =====
-==== Zeta SBC Project (Sergey Kiselev) ====
+==== Omega Home Computer Project (Sergey Kiselev) ====
 ^Board / Component^  Stock  ^  Price  ^Order Contact^Notes|
-|Zeta SBC PCB|  10  |  $15  |Todd Goodman|   |
+|[[https://github.com/skiselev/omega/blob/master/Keyboard.md|Omega Keyboard PCB Version 1.1]]|  0  |  $15  |Sergey Kiselev|   |
-|Zeta SBC V2 PCB|  20  |  $20  |Todd Goodman| |
+|[[https://github.com/skiselev/omega/blob/master/Mainboard.md|Omega Main Board PCB Version 1.2]]|  0  |  $20  |Sergey Kiselev|   |
-|ParPortProp PCB|  20  |  $20  |Todd Goodman| |
+|[[https://github.com/skiselev/omega/blob/master/Mainboard.md|Omega Main Board PCB Version 1.2]]|  4  |  $15USD  |Phil Summers|   |
-|SST39SF040 (512 KiB Flash)|  14  |  $4  |Sergey Kiselev|Can be preprogrammed with the firmware of your choice|
+|[[https://github.com/skiselev/omega/blob/master/Keyboard.md|Omega Keyboard PCB Version 1.1]]|4|15€|Jordi Solis| |
+|[[https://github.com/skiselev/omega/blob/master/Keyboard.md|Omega Keyboard PCB Version 1.1]]|4|$15USD|Phil Summers| |
+|[[https://msxmakers.design.blog/proyectos/omega-home-computer/version-de-omega-1-3-eu/|Omega Main Board PCB Version 1.4 eu]]|0|15€|Jordi Solis| |
+|[[https://github.com/RBSC/F4-FMPAC|F4/FMPAC v2.0 extension PCB]]|0|8€|Jordi Solis|includes miniPS adaptor board|
+|[[https://msxmakers.design.blog/proyectos/o4mega/|o4Mega v2.0 4Mb extension PCB ]]|9|8€|Jordi Solis| |
+|MSX interface cartridge boards|   |   | |   |
+|[[https://msxmakers.design.blog/proyectos/obsonet-v-1-0/|Obsonet ethernet network card]]|  7  |  8€  |Jordi Solis|   |
+|[[https://github.com/costarc/MSXPi|MSX-Pi v0.7]]|  3  |  8€  |Jordi Solis|   |
+|[[https://github.com/Wierzbowsky/MSX_Breadboard_Large|MSX large prototype board]]|  10  |  8€  |Jordi Solis|   |
+|[[https://msxmakers.design.blog/proyectos/proyecto-tdc-600/|Floppy Disk Interface]]|  2  |  8€  |Jordi Solis|   |
+|[[https://msxmakers.design.blog/proyectos/tsxduino-mega/|TSXDuino Mega]]|  9  |  8€  |Jordi Solis|   |
+|[[https://msxmakers.design.blog/proyectos/casduino-mega/|CasDuino Mega]]|  5  |  10€  |Jordi Solis|   |
+|[[https://msxmakers.design.blog/inventario/|MSX-IDE v2]]|  9  |  8€  |Jordi Solis|   |
+|[[https://msxmakers.design.blog/inventario/|Multi-controller card (FDD+IDE)]]|  8  |  8€  |Jordi Solis|   |
+|[[https://msxmakers.design.blog/inventario/|WozBlaster]]|  6  |  8€  |Jordi Solis|   |
+|[[https://msxmakers.design.blog/inventario/|SD-Mapper]]|  8  |  8€  |Jordi Solis|   |
+|[[https://msxmakers.design.blog/inventario/|Carnivore2]]|  7  |  8€  |Jordi Solis|   |
 ==== Minimal 8085/Z80 Single Board Computer ====
 ^Board / Component^Stock^Price^Order Contact^Notes|
-|[[:boards:sbc:minimax8085:start|MiniMax8085]][[:boards:sbc:minimax8085:start| PCB]]|  12 \\   \\ 8|  $5|   \\ Sergey Kiselev \\   \\ Phillip Summers|   |
+|[[:boards:sbc:minimax8085:start|MiniMax8085]][[:boards:sbc:minimax8085:start| PCB]]|  6  |  $5 USD  |Phillip Summers  |   |
-|[[:builderpages:rhkoolstar:sbc-2g-512|]]|7|$5|Phillip Summers|Rienk Koolstar's Z80 SBC based on Grant Searle's 9 chip breadboard design.  |
+|[[:builderpages:rhkoolstar:sbc-2g-512|]]  |  2  |  $5 USD  |Phillip Summers|Rienk Koolstra's Z80 SBC inspired by Grant Searle's 9 chip breadboard design.  |
+|   |  1  |  $5  |Rienk Koolstra  |price includes shipping  |
+|[[https://github.com/skiselev/easy_z80|Easy Z80 V1.1 PCB]]  |2  |$5  |Sergey Kiselev  |   |
+|[[https://hackaday.io/project/168014-rc-z8basic|RC-Z8BASIC]]  |3  |$5 USD  |Phillip Summers  |Just4Fun's [[https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=404&start=0&|Z8671 ]]based board.  |
+|[[:builderpages:plasmo:zrcc:zrcc1_1|ZRCC]] Kit, rev1.1  |5  |25 USD|Bill Shen|22MHz CP/M-ready Z80 SBC, 64meg CF disk included. Shipping is 6 USD in USA only.|
+|  [[:builderpages:plasmo:zrcc:zrcc1|ZRCC rev1.1]]  Assembled, tested  |2  |40 USD|Bill Shen|Assembled and tested 22MHz CP/M-ready Z80 SBC, 64meg CF disk included. Shipping is 6 USD in USA only.|
 ==== MPU302, Repurposed Soneplex SPX-MPU board for CP/M-68K ====
@@ Line 25: / Line 46: @@
 ^**Board** ^**Stock** ^**Price** ^**Order Contact** ^**Notes** |
 |[[:boards:sbc:mpu302|MPU302]]|1|$50|Bill Shen|Pre-programmed and tested with CP/M 68K ver 1.3. Board ready to run.|
+==== CB030, 68030 SBC, 16 Meg Memory, CP/M 68K Ready ====
+^Board^Stock^Price^Order Contact^Notes|
+|CB030 Partially assembled|0|$25|Bill Shen|PC board with all SMT components soldered, EPM7128S is soldered and programmed|
+|[[:builderpages:plasmo:cb030:cb030_rev1|CB030]] Assembled|1|$85|Bill Shen|Fully assembled and tested CB030 include a 256 meg CF disk and an USB-to-serial adapter.|
+|CB030 PCB|3|5€|Yves Dupont|bare PC board - shipping from Europe|
 ==== Tiny68K, Rev2, 68000 SBC, 16 Meg Memory, CP/M 68K Ready ====
 ^Board^Stock^Price^Order Contact^Notes|
-|[[:boards:sbc:tiny68k:tiny68k_rev2|Tiny68K]], rev2|1|$50|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included|
+|[[:boards:sbc:tiny68k:tiny68k_rev2|Tiny68K]], rev2|1|$60|Bill Shen|Assembled and tested with CP/M 68K ver 1.3. A Compact Flash card included|
-|Tiny68k_r2 Kit|0|$30|Bill Shen|PC board with all SMT components soldered, remaining DIP components and sockets in kit form, CF card not included|
+|Tiny68k_r2 PCB|5|5 USD|Phillip Summers| |
-|Tiny68k_r2 PCB|9|$5|Phillip Summers|Silver plated edge connectors only.|
+|Tiny68k_r2 PCB|4|5€|Yves Dupont|bare PC board - shipping from Europe|
 ==== Multicomp ====
-^Board^Stock^Price^Order Contact^Notes|
+^Board^Stock^Price Currency^Order Contact^Notes|
-|[[:boards:sbc:multicomp:cycloneii-c:start|Multicomp IIc]]|9|$5|Phillip Summers|v1.10 Protoboards ex dirtypcb.com.|
+|[[:boards:sbc:multicomp:cycloneii-c:start|Multicomp IIc]]  |  4  |  $5 USD  |Phillip Summers  |v1.10 boards  |
+|[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:rhkoolstar:cycloneiv.jpg|Muliticomp IV]]  |  9  |  $5  |Rienk Koolstra  |price includes shipping – see [[:builderpages:rhkoolstar:start|main page]]  |
-===== EuroCard Bus (ECB) Boards =====
+==== AVR Based board ====
-^Board / Component  ^  Stock  ^  Price  ^Order Contact  ^Notes  |
+^Board^Stock^Price Currency^Order Contact^Notes|
-|[[:boards:ecb:cassette_intf:start|Cassette Interface]]|   |  $20  |   |   |
+|[[https://www.retrobrewcomputers.org/lib/exe/fetch.php?media=builderpages:rhkoolstar:cpmega88.jpg|CP/Mega88]]  |  9  |  $2  |Rienk Koolstra  |AVR implementation of Takashi Toyoshima's CP/Mega88 in SMD \\ price includes shipping - see [[:builderpages:rhkoolstar:start|main page]]  |
-|[[:boards:ecb:diskio-v3:start|Disk I/O V3]]|   \\ 20 \\   \\ 8  |   \\ $10 \\   \\ 10  |   \\ Todd Goodman \\   \\ Phil Summers|   |
-|[[:boards:ecb:propio:start|Prop I/O V2]]|  20 \\   \\ 2  |  $20  |Wayne Warthen \\ Jordi Solís|   |
+==== SBC-85 ====
-|[[:boards:ecb:backplane-8:start|ECB Backplane (8 slot)]]|  11 \\ 32  |  $20 USA  |John Coffman \\ Rich Cini|167mm version \\ co-stocked for mini-68k|
-|[[:boards:ecb:backplane-3:start|ECB Mini Backplane (3 slot)]]|  6  |  $5  |Phil Summers|(Will Sowerbutts also accumulating orders – will order another batch soon.)|
+^**Board** ^**Stock** ^**Price** ^**Location** ^**Order Contact** ^**Notes** |
-|[[:boards:sbc:sbc_v2:start|SBC V2]]|  0  |  $20  |Jordi Solís  |More on order  |
+|**ASSEMBLED** | | | | | |
-|[[:boards:sbc:sbc-188:start|SBC-188]]|  0  |  $20  |Todd Goodman|   |
+|SBC CPU v2.0 Assembled|1|$75|USA|Craig Andrews| |
-|4MEM|   |  $20  |   |   |
+| | | | | | |
-|[[:boards:ecb:protoboard_iii:protoboard_iii|Prototyping Board III]]|  4 \\ 17  |  $15  |Ewout Ros \\ John Coffman|A new production run has arrived  |
+|**BARE BOARDS** | | | | | |
-|[[:boards:ecb:zilog-peripherals:start|Zilog Peripherals]]|   |  $20  |   |   |
+|[[http://sbc-85.com/index.php/documentation/sbc-85-cpu-v1-1-1-2-documentation/|SBC CPU v2.0 -Tin Fingers]]|2|$5|USA|Craig Andrews| |
-|[[:boards:ecb:scg:start|Sprites Color Graphics and Sound v02 (SCGS)]]|  1  |  $20  |Jordi Solís  |   |
+|[[http://sbc-85.com/index.php/documentation/sbc-85-cpu-v1-1-1-2-documentation/|SBC CPU v2.0 - Gold Fingers]]|0|$8|USA|Craig Andrews| |
-|[[:boards:ecb:bus-monitor:start|ECB Bus Monitor]]|  20  |  $20  |Todd Goodman|   |
+|[[http://sbc-85.com/index.php/documentation/backplane-4-documentation/|Backplane-4 v1.0]]|1|$5|USA|Craig Andrews| |
-|MSX Cartridge reader|   |  $20  |   |   |
+|[[http://sbc-85.com/index.php/documentation/sbc-85-cassette-tape-interface-documentation/|Cassette Interface v1.0]]|3|$3|USA|Craig Andrews| |
-|[[:boards:ecb:dsky:start|DSKY V2]]|   |  $20  |   |   |
+|[[https://hackaday.io/project/170832-magnetic-bubble-memory-makes-a-comeback|Bus Monitor Supreme v1.1b]]|0|$5|USA|Craig Andrews|May contain undiscovered bugs so it is still considered to be a prototype|
-|VDU|   |  $20  |   |   |
+|[[https://hackaday.io/project/170832-magnetic-bubble-memory-makes-a-comeback|1Mbit 7110A Bubble]]|2|$10|USA|Craig Andrews|May contain undiscovered bugs so it is still considered to be a prototype|
-|[[:boards:ecb:ramfloppy:start|ECB RAM-Floppy R11]]|  0  |  $24  |Wolfgang Kabatzke|R13 with GAL currently in development. Design is finished, but no production and test|
+|Protoboard v1.0d|5|$3|USA|Craig Andrews| |
-|[[:boards:ecb:4pio:start|ECB 4PIO R03]]|  0  |  $24  |Wolfgang Kabatzke|R03 is redesign of R02 with jumpers, no DIP-switches, and optimized Look-ahead-carry-logic, not tested yet|
-|[[:boards:ecb:modprn:start|ECB ModPrn R03]]|  0  |  $24  |Wolfgang Kabatzke|R02 actual in test, R03 is redesign of R02 with jumpers, no DIP-switches and error correction ( 5V and GND on 74LS27) and SUB-D9 male connectors like PC|
+===== EuroCard Bus (ECB) Boards =====
-|[[:boards:ecb:mf-pic:start|ECB MF/PIC (68K Multifunction)]]|  29  |  $20  |Rich Cini|v3.1-008 (20) and v3.1-007 (9). Includes National Semiconductor PIC chip with purchase.|
-|[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/48860720/35269969/index.htm|ECB Dual IDE with FDC]]|  8  |  $20  |Rich Cini|v2.0-006|
+^Board / Component^Stock^Price Currency^Order Contact^Notes|
-|[[:boards:ecb:adio:start|ECB A/D-I/O]]|  4  |  $20  |Rich Cini|v1.0-001|
+|[[:boards:ecb:cassette_intf:start|Cassette Interface]]|  2  |  $10  |Jordi Solis| |
-|[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/48860720/35845601/index.htm|uPD7220 V2]]|   |  $20  |   |   |
+|[[:boards:ecb:diskio-v3:start|Disk I/O V3]]  |  20  |  $10  |Todd Goodman  |   |
-|[[:boards:ecb:backplane-12:start|ECB Extended Backplane (12 slot)]]|  2  |  $25  |Jordi Solís  |   |
+| |  3  |  10 USD  |Phil Summers| |
-|ECB Advanced Prototyping board|   |  $20  |   |   |
+|[[:boards:ecb:propio:start|Prop I/O V2]]|  1  |  $10 USD  |Wayne Warthen| |
-|N8VEM Mini SBC v8|   |  $20  |   |   |
+| |  3  |  $10  |Jordi Solis| |
-|[[:boards:ecb:mini-68k:start|ECB Mini-68K]]|  28  |  $20  |Rich Cini|v2.0-007; requires MF/PIC board to operate.|
+|[[:boards:ecb:backplane-8:start|ECB Backplane (8 slot)]]|  3  |  $10  |John Coffman|167mm version, 1/8" (double) thickness|
-|[[:boards:ecb:cvdu:start|ColorVDU V2]]|  14  |  $20  |Wayne Warthen|   |
+|   |  21  |$20 USD  |Rich Cini  |co-stocked for 68k boards  |
-|[[:boards:ecb:vga3:vga3|ECB VGA3]]|  18  |   \\ $25 USA  |John Coffman|4-layer board; let me know if you need pre-programmed GAL's.|
+|[[:boards:ecb:backplane-3:start|ECB Mini Backplane (3 slot)]]|  50  |  $5  |Will Sowerbutts|New stock November 2018: 1.6mm, HASL lead solder finish.|
-|[[:boards:sbc:n8:n8|N8 Home Computer (ECB HC3v2)]]|  20  |  $20  |Todd Goodman|   |
+|[[:builderpages:b1ackmai1er:backplane-4|ECB Mini Backplane (4 slot 10×10)]]|  0  |  $5 USD  |Phil Summers| |
-|[[:boards:ecb:dual-sd-card:start|ECB Dual SD Card]]|  12  |  $20 USA  |John Coffman|   |
+|[[:boards:sbc:sbc_v2:sbc_v2-004|SBC-V2-004v]]|1  |$10 USD  |Phil Summers|Updated design including reset correction, onboard ide connector, sound, super capacitor, clock divider, rs232-ttl solder jumpers. One minor errata is applicable.|
-|[[:boards:sbc:z180_mark_iv:z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]]|  0  |  $25 USA  |John Coffman|single board computer w/ IDE8 & SDcard|
+|[[:boards:sbc:sbc_v2:start|SBC V2-003A]]|  4  |  $10 USD  |Phil Summers|  Includes the Kontron reset correction.|
-|[[:boards:ecb:backplane-505-6508:start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]]|  0  |  $35  |John Coffman|contact me if you want the Gerber files to manufacture this board|
+|[[:boards:sbc:sbc_v2:start|SBC V2-003]]  |  2  |  $10  |Jordi Solis  |   |
-|[[:boards:ecb:kiss-68030:start|ECB MC68030 CPU & memory (KISS030)]]|  20  |  $25  |Rich Cini|v1.0-006; requires MF/PIC board|
+|[[:boards:sbc:sbc-188:start|SBC-188 v3.2]]  |  2  |  $12  |John Coffman  |4-layer 25mhz respin of the SBC-188 ups memory to 1Mb & adds PPIDE connector. Boards 3.1 and 3.2 are hosted at PCBway.com for independent manufacturing. The two boards are electrically identical. 3.2 board uses jumpers to install the 3.1 "bent pin" errata.  |
-|[[:boards:ecb:4uart-usb:4-uart-usb|ECB 4UART-USB]]|  13  |  $20 USA  |John Coffman|   |
+|[[:boards:sbc:sbc-188:start|SBC-188 v3.1]]  |  9  |  $25  |Richard Edwards  |Australia based stock of SBC-188 v3.1 board. Electrically //identical// to the 3.2 board. (JRC)  |
-|[[:boards:ecb:usb-fifo:start|ECB USB FIFO]]|  3  |  $6  |Will Sowerbutts| |
+|[[:boards:sbc:ns32000|SBC NS32000]]  |  9  |  $12  |John Coffman  |Board is hosted at PCBway.com in China.  |
-|[[:boards:sbc:6x0x-atx-6u:start|ECB 6x0x-ATX-6U]]|  0  |  $20  |Andrew Bingham|May do another run if there is interest.|
+|  4MEM  |   |   |   |obsolete (JRC)  |
-|[[:builderpages:trick-1:start|ECB TRAM Carrier v0.5]]|  9  |  $15  |Richard Edwards|Supports 4 INMOS TRAM's. Required Host Link Adapter and TRAM Modules (AUS)|
+|[[:boards:ecb:protoboard_iii:protoboard_iii|Prototyping Board III]]  |  4  |  $15  |Ewout Ros  |   |
-|[[:boards:sbc:65c816_ecb_sbc:65c816_ecb_sbc|ECB 65c816 SBC]]|  15  |  $20  |Dan Werner|note the logic family on the board – U6 must be HCT!|
+|[[:boards:ecb:protoboard_iii:protoboard_iii|Prototyping Board III]]  |  12  |  $5  |John Coffman  |1606 version requiring data line errata (add 6 wires)  |
-|[[:boards:ecb:bus-extender:start|ECB Bus Extender]]|  4  |  $15  |Richard Edwards|note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)|
+|[[:boards:ecb:protoboard_iii:protoboard_iii|Prototyping Board III]]  |  2  |  $10 USD  |Phil Summers  |17-10-05 version.  |
+|[[:boards:ecb:zilog-peripherals:start|Zilog Peripherals]]  |  0  |  $10 USD  |Phil Summers  |   |
+|[[:boards:ecb:scg:start|Sprites Color Graphics and Sound v02 (SCGS)]]  |  1  |  $10  |Jordi Solis  |   |
+|[[:boards:ecb:scg:start|Sprites Color Graphics and Sound v03 (SCGS)]]  |  1  |  10 USD  |Phil Summers  |   |
+|[[:boards:ecb:bus-monitor:start|ECB Bus Monitor]]  |  20  |  $20  |Todd Goodman  |   |
+|MSX Cartridge reader  |   |  $20  |   |   |
+|[[:boards:ecb:dsky:start|DSKY V2]]  |  4  |  $10  |Jordi Solis  |   |
+|[[:boards:ecb:vdu:start|ECB VDU]]  |0|  $10 USD  |Phil Summers  |   |
+|[[:boards:ecb:ramfloppy:start:r12|ECB RAM-Floppy R11]]  |3  |$10 USD  |Phil Summers  |   |
+|[[:boards:ecb:4pio:start|ECB 4PIO R03]]  |  1  |  Free  |Phil Summers  |Note [[:boards:ecb:4pio:errata|Errata]] with the R03 board. Postage is 2.00 AUD within Australia, $7.50AUD overseas.  |
+|[[:boards:ecb:modprn:start|ECB ModPrn R03]]  |   |   |   |   |
+|[[:boards:ecb:mf-pic:start|ECB MF/PIC (68K Multifunction)]]  |  0  |  $20  |Rich Cini  |v4.0-008. Includes National Semiconductor PIC chip with purchase.  |
+|[[http://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/48860720/35269969/index.htm|ECB Dual IDE with FDC]]  |  4  |  $20  |Rich Cini  |v2.0-006  |
+|[[:boards:ecb:adio:start|ECB A/D-I/O]]  |  2  |  $20  |Rich Cini  |v1.0-001  |
+|[[:boards:ecb:adio:start|ECB 2S1P Multiport Board]]  |  17  |  $20  |Rich Cini  |v1.0-001  |
+|[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/48860720/35845601/index.htm|uPD7220 V2]]  |   |  $20  |   |   |
+|[[:boards:ecb:backplane-12:start|ECB Extended Backplane (12 slot)]]  |  1  |  $15  |Jordi Solis  |   |
+|ECB Advanced Prototyping board  |   |  $20  |   |   |
+|N8VEM Mini SBC v8  |   |   |   |   |
+|[[:boards:ecb:mini-68k:start|ECB Mini-68K]]  |  24  |  $20  |Rich Cini  |v2.0-007; requires MF/PIC board to operate.  |
+|[[:boards:ecb:cvdu:start|ColorVDU V2]]  |  8  |  $10 USD  |Wayne Warthen  |   |
+|[[:boards:ecb:vga3:vga3|ECB VGA3]]  |  0  |  $18  |John Coffman  |4-layer board.  |
+|[[:boards:sbc:n8:n8|N8 Home Computer (ECB HC3v2)]]  |  20  |  $20  |Todd Goodman  |   |
+|[[:boards:ecb:dual-sd-card:start|ECB Dual SD Card]]  |  5  |  $5  |John Coffman  |   |
+|[[:boards:sbc:z180_mark_iv:z180_mark_iv|ECB Z180 SBC Mark IV (4-layer)]]  |0  |$12  |John Coffman  |Contact me if interested.  |
+|[[:boards:sbc:sbc-386ex:rev2.0|ECB SBC-386EX V2.0]]  |  4  |  $15 USD  |Phil Summers  |   |
+|[[:boards:ecb:backplane-505-6508:start|ECB 12-slot Backplane for Siemens 6508 chassis or stand-alone]]  |1  |$15 USD  |Phil Summers  |v1.00-6508-002  |
+|[[:boards:ecb:kiss-68030:start|ECB MC68030 CPU & Memory (KISS030) Board)]]  |  0  |  $25  |Rich Cini  |v1.1-006; requires MF/PIC board.  |
+|[[:boards:ecb:4uart-usb:start|ECB 4UART-USB]]  |  10  |  $5  |John Coffman  |   |
+|[[:boards:ecb:usb-fifo:start|ECB USB FIFO]]  |  30  |  $6  |Will Sowerbutts  |New stock November 2018. Driver now in ROMWBW.  |
+|[[:boards:sbc:6x0x-atx-6u:start|ECB 6x0x-ATX-6U]]  |  0  |  $20  |Andrew Bingham  |May do another run if there is interest.  |
+|[[:builderpages:trick-1:start|ECB TRAM Carrier v0.5]]  |  9  |  $15  |Richard Edwards  |Supports 4 INMOS TRAM's. Required Host Link Adapter and TRAM Modules (AUS)  |
+|[[:boards:sbc:65c816_ecb_sbc:65c816_ecb_sbc|ECB 65c816 SBC]]  |  15  |  $20  |Dan Werner  |note the logic family on the board – U6 must be HCT!  |
+|[[:boards:ecb:bus-extender:start|ECB Bus Extender]]  |  4  |  $15  |Richard Edwards  |note - extender board has row A and C. Row B is not part of the design although ribbon cable can be used to bring row B through. (AUS)  |
+==== Andrew Lynch's MBC Boards ====
+^Board^Stock^Price^Order Contact^Notes|
+|[[https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=568&goto=8397&#msg_8397|Z80 backplane ]]|4|$5 USD|Phil Summers|v1|
+|[[https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=568&goto=8398&#msg_8398|Z80 processor ]]|4|$5 USD|Phil Summers|v1|
+|[[https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=568&goto=8399&#msg_8399|Z80 clock ]]|4|$5 USD|Phil Summers|v1|
+|[[https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=568&goto=8400&#msg_8400|Z80 ROM ]]|4|$5 USD|Phil Summers|v1|
+|[[https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=568&goto=8401&#msg_8401|Z80 RAM ]]|4|$5 USD|Phil Summers|v1|
+|[[https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=568&goto=8402&#msg_8402|Z80 serial ]]|4|$5 USD|Phil Summers|v1|
+|[[https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=568&goto=8403&#msg_8403|Z80 PPIDE ]]| | | | |
 ===== S-100 Bus Boards =====
 ^Board / Component^  Stock  ^  Price  ^Order Contact^Notes|
-|Regular Prototyping Board|   |$20|   |   |
+|Regular Prototyping Board|   |  $20  |   |   |
-|Buffered Prototyping Board v3.0a|  20  |$20|Todd Goodman  |   |
+|[[http://s100computers.com/My System Pages/Prototype Board/Prototype Board.htm|Buffered Prototyping Board v3.0a]]|  20  |  $20  |Todd Goodman  |   |
-|Buffered Prototyping Board Mini Sea of PTH's|  30  |  $20  |Josh Bensadon|   |
+|[[http://s100computers.com/My System Pages/Mini Buffered Prototype Board/Mini Buffered Prototype Board.htm|Buffered Prototyping Board Mini Sea of PTH's]]|  30  |  $25  |Josh Bensadon (in Canada)|   |
-|Backplane (9 slot, terminated) - V4|  20  |  $15  |Todd Goodman|   |
+|[[https://retrobrewcomputers.org/doku.php?id=boards:s100:backplanev4:start|Backplane (9 slot, terminated) - V4]]|  20  |  $15  |Todd Goodman|   |
 |Backplane (Antony's 18 slot, terminated) - V2|  20  |  $32  |Todd Goodman|   |
-|Dual IDE - Version 03a|20  |  $20  |Todd Goodman  |   |
+|[[http://s100computers.com/My System Pages/IDE Board/My IDE Card.htm|Dual IDE - Version 03a]]|  20  |  $20  |Todd Goodman  |   |
-|Parallel ASCII Keyboard|   |  $20  |   |   |
+|[[http://s100computers.com/My System Pages/IDE Board/My IDE Card.htm|Dual IDE - Version 04]]|  20  |  $20  |Todd Goodman  |   |
-|4MB SRAM|  18  |  $20  |Gary Kaufman|   |
+|[[http://www.s100computers.com/My System Pages/IBM Keyboard/IBM Keyboard.htm|Parallel ASCII Keyboard v02]]|  20  |  $20  |Todd Goodman|   |
-|System Monitor Board - V3|  0  |  $20  |Todd Goodman|More on order  |
+|[[http://www.s100computers.com/My System Pages/4MG Static RAM Board/4MG_RAM Board.htm|4MB SRAM v01]]|  30  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/SMB Board/S100 Bus SMB.htm|System Monitor Board - V3]]|  40  |  $20  |Todd Goodman|   |
 |——TIL311 Display Board for SMB|  20  |  $6  |Todd Goodman|   |
 |——LED Bar Display Board for SMB|  20  |  $10  |Todd Goodman|   |
 |——HP5082 Display Board for SMB|  20  |  $10  |Todd Goodman|   |
-|Bus Extender - V2|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/Extender Board/Extender Board.htm|Bus Extender - V2]]|  20  |  $20  |Todd Goodman|   |
-|RAM & ROM - Version 02|   |  $20  | |   |
+|[[http://s100computers.com/My System Pages/PROM Board/PROM Board.htm|RAM & ROM - v2.0b]]|  20  |  $20  |Todd Goodman|   |
-|Serial I/O|   |  $20  |   |   |
+|[[http://s100computers.com/My System Pages/Serial IO Board/Serial IO Board.htm|Serial I/O v3.1]]|  20  |  $20  |Todd Goodman  |   |
-|PIC/RTC|   |  $20  |   |   |
+|[[http://s100computers.com/My System Pages/Serial IO Board/Serial IO Board.htm|Serial I/O v4.2]]|  20  |  $20  |Todd Goodman  |   |
-|Z80 V2 CPU board|  0  |  $20  |Gary Kaufman|Collecting names for another run|
+|[[http://s100computers.com/My%20System%20Pages/PIC&RTC%20Board/My%20PIC%20Board.htm|PIC/RTC v1.1]]|  20  |  $20  |Todd Goodman  |   |
-|Propeller Based Console I/O - Version 02|   |  $20  |   |   |
+|IMSAI MPU-A CPU Board (8080A) reproduction of original|  20  |  $30  |Gary Kaufman| |
-|ZFDC|  2  |  $20  |Gary Kaufman|   |
+|[[http://s100computers.com/My System Pages/Console IO Board/Console IO Board.htm|Propeller Based Console I/O - v2.51]]|  20  |  $20  |Todd Goodman  |   |
-|68000/68010 CPU board|   |  $20  |   |   |
+|Altair 8800 CPU Board (8080A) reproduction of original|  30  |  $30  |Gary Kaufman|   |
-|8088 Master/Slave CPU Board|  0  |  $20  |Gary Kaufman|Collecting names for another run|
+|[[http://s100computers.com/My System Pages/68000 Board/68K CPU Board.htm|68000/68010 CPU board v1.03b]]|  20  |  $20  |Todd Goodman  |   |
-|8086 Master/Slave CPU Board|  20  |  $20  |Gary Kaufman|   |
+|[[http://s100computers.com/My System Pages/8086 Board/8086 CPU Board.htm|8086 Master/Slave CPU Board]]|  20  |  $20  |Gary Kaufman|   |
-|6502 CPU board|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/6502 Board/6502 CPU Board.htm|6502 CPU board]]|  20  |  $20  |Todd Goodman|   |
-|16MB SRAM - V1|  60  |  $15  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/16MG RAM Board/16MG RAM Board.htm|16MB SRAM - v6.0a]]|  20  |  $20  |Todd Goodman|   |
-|—-Mezzanine board for SRAM - V06C|  3  |  $3  |Todd Goodman|   |
+|—- Mezzanine Board for SRAM - V06d|  60  |  $3  |Todd Goodman|   |
-|Parallel I/O Board V2|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/16MG RAM Board/16MG RAM Board.htm|16MB SRAM - V1]]|  60  |  $15  |Todd Goodman|   |
-|Bus Terminator|  20  |  $20  |Todd Goodman|   |
+|—-Mezzanine board for SRAM - V06C|  12  |  $1  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/Parallel Ports IO Board/Parallel Ports IO Board.htm|Parallel I/O Board V2]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/Terminator Board/Bus Terminator Board.htm|Bus Terminator]]|  20  |  $20  |Todd Goodman|   |
 |S-100 PC-AT Ver 02 (DOS Support Board)|  0  |  $15  |Neil Breeden|   |
 |S-100 Front Panel (aka FP Mini)|  4  |  $20  |Don Caprio|   |
 |Front Panel - Full Size (reproduction of a popular classic)|  2  |  ??  |Don Caprio|Looking for Beta tester|
 |S-100 Bus Breakout Board|  75  |  $5  |Don Caprio|Board In production|
-|S-100 OPL3 V1|  20  |  $17  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/OPL3 Game Board/OPL3  Board.htm|S-100 OPL3 V1]]|  20  |  $17  |Todd Goodman|   |
-|S-100 V2 MSX2 UTILITY Board|  9  |  $20  |Jordi Solis|Looking for Beta tester  |
+|S-100 V2 MSX2 UTILITY Board|  9  |  15 €  |Jordi Solis|Looking for Beta tester  |
+|[[http://s100computers.com/My System Pages/SBC Z80 Board/SBC Z80 CPU Board.htm|Z-80 SBC v1.1a]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/Z80 Board/Z80 CPU Board.htm#V2 Z80 CPU Board|Z-80 Master v2.01]]|  20  |  $22  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/ZFDC Board/ZFDC.htm|ZFDC v1.0b]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/8088 Board/8088 CPU Board.htm|8088 Master v2 (Marked "Version 01" on silkscreen)]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/80286 Board/80286 CPU Board.htm|80286 v2]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/80386 Board/80386 CPU Board.htm|80386 v2.31]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/80386 - 32MG RAM Board/32MG Static RAM Board.htm|32/64MB OTT RAM v3.11b]]|  20  |  $26  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/PDP11 V2 Board/PDP11 Board V2.htm|PDP11 CPU v2]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/PDP11 Support Board/PDP11 Support  Board.htm|PDP11 Support v1.01]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/MSDOS Board/MSDOS Board.htm|MSDOS Support v3a]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/VGA_16_Board (Trident)/VGA_16_Board.htm|16-bit VGA v15a]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/VGA Board/VGA Board.htm|8-bit VGA v11]]|  20  |  $20  |Todd Goodman|   |
+|Trident Adapter v15a|  20  |  $5  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/80486 Board/80486 CPU Board.htm|Full Size 80486 v15a]]|  20  |  $36  |Todd Goodman|   |
+|CCS-2422E|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/Bus Display Board/Bus Display Board.htm|Bus Display v1.21]]|  60  |  $25  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/FPGA Board V2/FPGA Board_V2.htm|FPGA v2]]|  20  |  $32  |Todd Goodman|   |
+|– FPGA Shield #0|  20  |  $8  |Todd Goodman|   |
+|– FPGA Shield #1|  20  |  $8  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/68030 Board/68030 Board.htm|68030 v1.1]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/FPGA Z80 SBC/FPGA Z80 SBC.htm|Z-80 FPGA v1.1B]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/Mega 328-2560 CPU Board/Mega 328-2560 CPU Board.htm|Mega 328-2560 v1.11]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/VDP Video Board/VDP Board.htm|MSX VDP Video Board v05]]|  20  |  $20  |Todd Goodman|   |
+|[[http://s100computers.com/My System Pages/Dazzler II Board/Dazzler_II Board.htm|Dazzler II v2.1d]]|  20  |  $22  |Todd Goodman|   |
+|– CPLDs, Programmed, for Dazzler II, One set (3 - U1, U3, and U6)|  0  |  $37 for the set of three  |Todd Goodman|Working to source and program more  |
+|– Joystick board for Dazzler II v1 (2016)|  20  |  $5  |Todd Goodman|   |
+|[[http://s100computers.com/Software Folder/CPLDs/Intro To CPLDs.htm|CPLD Programming Motherboard]]|  20  |  $15  |Todd Goodman|   |
+|[[https://retrobrewcomputers.org/doku.php?id=boards:s100:cromemco_zpu_reproduction:start|Rich Camarda's Cromemco ZPU Reproduction revB]]|  20  |  $22  |Todd Goodman|   |
+|[[https://retrobrewcomputers.org/doku.php?id=boards:s100:compupro_system_support_reproduction:start|Rich Camarda's CompuPro System Support Reproduction revB2]]|  20  |  $22  |Todd Goodman|   |
+|[[http://s100computers.com/My%20System%20Pages/Raspberry%20Pi%20CPU%20Board/Raspberry%20Pi%20CPU%20Board.htm|Raspberry Pi CPU Board v2.3]]|  20  |  $30  |Todd Goodman|   |
+|[[http://s100computers.com/My%20System%20Pages/Math%20Board/Math%20Board.htm|AM9511 Math Board v1.0]]|  20  |  $30  |Todd Goodman|   |
 ===== ISA Bus Boards =====
@@ Line 124: / Line 231: @@
 ^**Board / Component**   ^**Stock**   ^**Price**   ^**Order Contact**   ^**Notes**   |
 |Xi 8088 PCB|20|$25|Todd Goodman|   |
-|ISA Backplane PCB|40|$25|Todd Goodman|   |
+|ISA Backplane PCB|40|$17|Todd Goodman|   |
-|ISA SVGA v1.1 PCB|15|$10|Todd Goodman|   |
+|ISA SVGA v1.1 PCB|40|$10|Todd Goodman|   |
 |XT-CF-Lite PCB|30|$12|Todd Goodman|   |
 |ISA OPL2 PCB|40|$10|Todd Goodman|   |
-|ISA Floppy Disk and Serial Controller PCB|20|$10|Todd Goodman|   |
+|ISA Floppy Disk and Serial Controller PCB|40|$10|Todd Goodman|   |
-|Micro 8088 PCB|25|$20|Sergey Kiselev|   |
+|Micro 8088 PCB|20|$20|Todd Goodman|   |
-|ISA 8-Bit Backplane PCB|18|$10|Sergey Kiselev|   |
+|ISA 8-Bit Backplane PCB|20|$15|Todd Goodman|   |
+|SST39SF040 (512 KiB Flash)|8|$4|Sergey Kiselev|Can be preprogrammed with the firmware of your choice  |
 ===== Other (formerly known as "Mini") Boards =====
 ^  **Board / Component**    ^  **Stock**    ^  **Price**    ^  **Order Contact**    ^  **Notes**    |
-|PPIDE|   |$5|   |   |
+|[[:boards:other:ppide|PPIDE]]|20|$12|Todd Goodman|   |
-|PPISD|0|$5|Todd Goodman|Ordering more  |
+|PPISD|20|$5|Todd Goodman|   |
 |AT2XTKBD|20|$5|Todd Goodman| |
 |ECB to Z80 Socket Adapters|   |$5|   |   |
@@ Line 143: / Line 251: @@
 |XT-IDE (ISA Bus)|0|$12|Todd Goodman|Not sure about reordering, new version created by someone on VCF  |
 |XT-FDC|40|$12|Todd Goodman|   |
-|MSX EPROM Cartridge|   |$5|   |   |
+|[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/48860720/37113829/index.htm|MSX EPROM Cartridge]]|   |$5|   |   |
 |Zeta/Z80-2-ECB Prototypes|2|$12|Andrew Bingham|   |
-|[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/38282303/95749082/index.htm|Elm GAL Programmer]]|  8 \\   \\ 11 \\  \\ 8|  7 \\   \\ 10 \\  \\ 5|  Jordi Solís \\   \\ Doug Gabbard \\  \\ Phillip Summers|  [[http://elm-chan.org/works/pgal/report_e.html|http://elm-chan.org/works/pgal/report_e.html]]  \\   \\  [[http://www.retrotechnology.com/herbs_stuff/gal.html|http://www.retrotechnology.com/herbs_stuff/gal.html]] \\   \\  [[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/82152589/Programmable logic devices - v1.6.pdf|https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/82152589/Programmable%20logic%20devices%20-%20v1.6.pdf]]  |
+|[[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/35845334/38282303/95749082/index.htm|Elm GAL Programmer]]|  2 \\  \\ 7|  5 € \\  \\ $5USD|  Jordi Solis \\  \\ Phillip Summers|  [[http://elm-chan.org/works/pgal/report_e.html|http://elm-chan.org/works/pgal/report_e.html]]  \\   \\  [[http://www.retrotechnology.com/herbs_stuff/gal.html|http://www.retrotechnology.com/herbs_stuff/gal.html]] \\   \\  [[https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/82152589/Programmable logic devices - v1.6.pdf|https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/82152589/Programmable logic devices - v1.6.pdf]]  |
-|CF-IDE daughterboard for MPU302|2|$1.50|Bill Shen|bare pc board  |
+|CF-IDE daughterboard for MPU302|2|$2|Bill Shen|bare pc board  |
-|[[:boards:other:idecf2din:start|CF-IDE daughterboard]] for MPU302|2|$10|Bill Shen|Assembled and tested, CF disk not included.  |
+|[[:boards:other:idecf2din:start|CF-IDE daughterboard]] for MPU302|2|$15|Bill Shen|Assembled and tested, CF disk not included.  |
+|[[:builderpages:plasmo:z280rc|Z280RC]], Z280 for RC2014|1|$50|Bill Shen|Assembled and tested, include CP2102 USB adapter and 128Meg CF loaded with software  |
+|MC14500 board|7|$5|Richard Edwards|1bit "CPU" board.  |
+|KIM Uno Board only|8|$5US|Michael Cvet.|Kim Uno Board using Arduino see [[http://obsolescence.wixsite.com/obsolescence/kim-uno-get-or-build-one|Tronixlabs ]](you can purchase kits from there also). I only have blank PC boards from an order I placed. Postage FREE to Aust. and US for 1 board.  |
+|SYM-1 Maxi Board|2|$20US|Michael Cvet.|SYM-1 Maxi board, serial clone of SYM-1 board. [[https://sites.google.com/site/gogleoops/sym-1-maxi|See Old Micros website]]. Postage FREE to Aust and US for 1 board.  |
+|[[https://hackaday.io/Just4Fun|uTerm-S]]|4|5AUD|Phil Summers|Just4Fun's VT100 VGA Serial terminal  |
+|[[https://velesoft.speccy.cz/data-gear.htm|Datagear DMA board]]|4|$3US|Phil Summers|Datagear DMA piggy back board.  |
+|VT132 Board v1.1|6|$5US|Richard Edwards|   \\ Australian Based stock of Geoff Graham's board updated by Gary Kaufman. Details can be found at [[https://hackaday.io/project/173216-ascii-video-terminal|https://hackaday.io/project/173216-ascii-video-terminal]]   |
+==== DEC (Digital) Boards (designed by Joerg Hoppe) ====
+^**Board / Component**   ^**Stock**   ^**Price**   ^**Order Contact**   ^**Notes**   |
+|[[http://retrocmp.com/projects/unibone|UniBone PCB]]|20|$60|Todd Goodman|   |
+|[[http://retrocmp.com/projects/unibone/275-unibone-as-disk-emulator|UniBone I2C PCB]]|20|$10|Todd Goodman|   |
+|[[http://retrocmp.com/tools/uniprobe|UniProbe PCB]]|20|$40|Todd Goodman|   |
+|[[http://retrocmp.com/tools/dec-km11-maintenance-panel|KM11 Maintenance Panel PCB]]|20|$15|Todd Goodman|   |
+|[[http://retrocmp.com/tools/unibus-spc-g7273-diagnostics|G7273 Diagnostics/Grant Continuity PCB]]|20|$20|Todd Goodman|   |
+|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender - Single PCB]]|20|$18|Todd Goodman|   |
+|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender - Single 5 PCB]]|20|$18|Todd Goodman|   |
+|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender - Dual PCB]]|20|$25|Todd Goodman|   |
+|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender - Dual 5 PCB]]|20|$25|Todd Goodman|   |
+|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender - Quad PCB]]|20|$35|Todd Goodman|   |
+|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender - Quad 5 PCB]]|20|$35|Todd Goodman|   |
+|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender - Hex PCB]]|20|$42|Todd Goodman|   |
+|[[http://retrocmp.com/tools/dec-flip-chip-extenders|DEC Flip-Chip Extender - Hex 5 PCB]]|20|$42|Todd Goodman|   |
+|–Connectors for Flip-Chip Extenders - ECS PN 2418-13-30 2400 Series Edge Card Connector - 18 contact pairs, .465 tail length, 30u Au|300|$10|Todd Goodman|   |
+===== Norberto Collado's Heathkit H8/H89 Boards =====
+^**Board / Component**   ^**Stock**   ^**Price**   ^**Order Contact**   ^**Notes**   |
+|[[http://koyado.com/Heathkit/H8-H17-H37-H67-USB.html|H8 H37 H67 Storage v1.4]]|20|$15|Todd Goodman| |
+|[[http://koyado.com/Heathkit/H8-H17-H37-H67-USB.html|H8 H17 Companion Board for H8 H37 H67 Storage Board v1.4]]|20|$15|Todd Goodman| |
+|[[http://koyado.com/Heathkit/H8_CP_NET_SPI_Wiznet_Network.html|H8 CP NET SPI Wiznet Network v03 GAL]]|20|$15|Todd Goodman| |
+|[[http://koyado.com/Heathkit/H8-Z80-64K-RTC-ORG0-V4.html|H8 Z80 CPU 64K RTC ORG0 v4]]|20|$20|Todd Goodman| |
+|[[http://koyado.com/Heathkit/H8-512KB_RAM_MMU-v40.html|H8 512K RAM v4]]|20|$20|Todd Goodman| |
+|[[http://koyado.com/Heathkit/H8-Z80-64K-RTC-ORG0-V3.html|DUART/USB v3.1]]|20|$15|Todd Goodman|Norberto kindly provided a large number of these boards free of charge to send to people ordering the H8 Z80 64K v4 board|
+|[[http://koyado.com/Heathkit/H8-82C55-PPIO.html|H8 82C55 Parallel Port IO v1.1]]|20|$20|Todd Goodman| |
+|[[http://koyado.com/Heathkit/H8-Front-Panel-V1.2.html|H8 Front Panel v2.0]]|20|$20|Todd Goodman| |
+|[[http://koyado.com/heathkit/New-H8-Website/h8-extender-board.html|H8 Extender v1.0]]|20|$15|Todd Goodman| |
+|[[http://koyado.com/heathkit/New-H8-Website/h8-system-support-i.html|H8 System Support I v3.1 v1.0]]|20|$20|Todd Goodman| |
+|[[http://koyado.com/heathkit/New-H8-Website/ha-8-3.html|HA-8-3-1 v1.1]]|20|$20|Todd Goodman| |
+|[[https://koyado.com/heathkit/New-H8-Website/h8-backplane.html|H8 Dual CPU Backplane v4.0]]|20|$20|Todd Goodman| |
+|[[https://koyado.com/heathkit/New-H8-Website/h8-z5-4-serial-console-cassette-io.html|H8-Z5-4 Serial Console Cassette IO]]|20|$22|Todd Goodman| |
+|[[https://koyado.com/heathkit/New-H8-Website/h8-z180-cpu.html|H8 Z180 CPU v5.1]]|20|$20|Todd Goodman| |
+|[[https://koyado.com/heathkit/New-H8-Website/h8-8080a-eeprom-ram-uart-ha8-8.html|H8 8080A CPU 64K ORG0]]|20|$10|Todd Goodman| |
+|[[https://koyado.com/heathkit/New-H8-Website/h8-h17-vdip1-fsb.html|H8 H17 Controller v2.1]]|20|$12|Todd Goodman| |
+|[[https://koyado.com/heathkit/New-H8-Website/h8-dual-cf-controller.html|H8 Dual CF Storage Controller v2.1]]|20|$12|Todd Goodman| |
+|[[https://groups.google.com/g/sebhc/c/kJ8j2dPcESE/m/_tcREa18DQAJ|H8 Circuit Board Mounting Brackets (flat brackets)]]|50|$8|Todd Goodman| |
+|[[https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/930/WIZ850io_Web.pdf|Wiznet WIZ850io from Douglas Miller]]|40|$18|Todd Goodman| |
 ===== Chips/Components =====
@@ Line 154: / Line 311: @@
 |80C188-25 CPU|0|$4|Todd Goodman|   |
 |WD37C65 FDC|   |$8|   |   |
-|NS32202|134|Free with MF/PIC|  Rich Cini or John Coffman|   |
+|NS32202|134|Free with MF/PIC|  Rich Cini|   |
+|EPM7128SLC84-10N|80|$8|  William Harrington|   |
 ===== Order Contact Information =====
-^**Contact**   ^**Email**   ^**Locn**   ^**Last Updated**   |
+^**Contact**   ^**Email**   ^**Locn**   ^**Last Updated**   ^**Username**   |
-|Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015|
+|Andrew Bingham|abingham <at> gmail.com| |26 Oct 2015| |
-|Rich Cini|rich.cini <at> gmail.com| |29 July 2014|
+|Rich Cini|rich.cini <at> gmail.com| |29 July 2014| |
-|John Coffman USA|johninsd <at> gmail.com| |20 Apr 2018|
+|John Coffman|johninsd <at> gmail <dot> com|USA|21 Dec 2021|jcoffman|
-|Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com| |18 Mar 2017|
+|Todd Goodman|tsg <at> bonedaddy.net or tacoman656 <at> gmail.com|USA|26 Dec 2023|tgoodman|
-|Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014|
+|Gary Kaufman|gkaufman <at> the-planet.org| |23 May 2014| |
-|Sergey Kiselev|skiselev:gmail/com (replace ':' with '@' and '/' with '.')| |28 Jul 2015|
+|Sergey Kiselev|skiselev:gmail/com (replace ':' with '@' and '/' with '.')| |28 Jul 2015| |
-|Ed Snider|zippster278 <at> gmail.com| |13 Mar 2018|
+|Ed Snider|zippster278 <at> gmail.com| |13 Mar 2018| |
-|Will Sowerbutts|will <at> sowerbutts.com|UK|22 July 2017|
+|Will Sowerbutts|will <at> sowerbutts.com|UK|22 July 2017| |
-|Wayne Warthen|wwarthen <at> gmail.com| |3 Sep 2015|
+|Wayne Warthen|wwarthen <at> gmail.com|USA|3 Sep 2015|wwarthen|
-|Neil Breeden|nbreeden <at> me.com| |23 May 2014|
+|Neil Breeden|nbreeden <at> me.com| |23 May 2014| |
-|Wolfgang Kabatzke|dr.wolfgangkabatzke:online/de (replace ':' with '@' and '/' with '.')| |15 Jan 2014|
+|Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014| |
-|Don Caprio|ilvunix <at> gmail.com| |05 Oct 2014|
+|Ewout Ros|ewout.ros <at> gmail.com| |19 Feb 2017| |
-|Ewout Ros|ewout.ros <at> gmail.com| |19 Feb 2017|
+|Richard Edwards|ecb <at> trick-1 <dot> net|Aust.|29 Aug 2019|trick-1|
-|Richard Edwards|ecb <at> trick-1 <dot> net| |5 Jul 2017|
+|Jordi Solís|msxmakers <at> gmail <dot> com|Spain|26 Nov 2020|jordi.solis|
-|Jordi Solís|jordi.solism <at> gmail <dot> com|Spain|20 Ago 2017|
+|Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017| |
-|Dan Werner|danwerner21 <at> gmail <dot> com| |24 Sept 2017|
+|Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017| |
-|Bill Shen|hshen <at> spinn.net|USA|29 Nov 2017|
+|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aust.|26 Jun 2021|[[:builderpages:b1ackmai1er:start|b1ackmai1er]]|
-|Phillip Summers|difficultylevelhigh <at> gmail <dot> com|Aus.|10 Mar 2018|
+|Doug Gabbard|doug <at> retrodepot <dot> net|USA|15 Apr 2019|jdgabbard|
-|Doug Gabbard|doug <at> retrodepot <dot> net|USA|29 Jan 2018|
+|Rienk Koolstra|rkstar42 <at> gmail <dot> com|NL|13 Oct 2018| |
+|Michael Cvetanovski|michael.cvet <at> gmail <dot> com|Aust|1 Mar 2021| |
+|Craig Andrews|craig.andrews <at> tessol - inc <dot> com|USA|19 Mar 2020|Craig|
+|Yves Dupont|reccc <at> pt <dot> lu|LUX|22 Mar 2021|Yves-D.|
+|William Harrington|kb0iic <at> gmail <dot> com|USA|30 Jul 2022|Berzerkula|
-\\
+=====   =====