Photos and comments will be updated as the builds progress.
1. 6x0x-ATX-6U plan to run Flex OS
note: build still in progress.
2. ECB computer.
CVDU board working . Output to CGA monitor from 10 pin header. osc 14.318
SBC Mark IV working. Serial Output to Vince Briel's Pocketerm.
SBC1 / VDU / DISKIO3 w/- 5.25 inch Floppy Drive
3. S100 Computer. Objective is to run monitor program with serial I/O to Terminal .
Backplane V02 / Z80 CPU Master V 2.0
System Monitor Board V2.0
Serial IO V03 / 4MB SRAM V 1.0
then onto CP/M 3
4. OLD Builds revisited
5. 8086 Maximum Mode SBC