====== Getting Started with K80 ======

This is a quick start guide to get K80 power up and running\\
{{https://www.retrobrewcomputers.org/lib/plugins/ckgedit/fckeditor/userfiles/image/builderpages/plasmo/k80/k80_annotated.jpg?direct&600x400}}

===== Setup hardware =====

Refer to above picture for various functions.

  * K80 needs 5V@200mA via the 2.1mm X 5.5mm power jack
  * The 6-pin CP2102 USB-serial adapter can plug directly into the serial connectors labelled as "channel A" and "channel B"
  * The Z80 CPU clock is independent from the serial clock.  The clock can be as low as 7.37MHz or as high as 24MHz.
  * Be sure the jumpers T43 and T44 are configured as shown in the picture.
  * Set the serial port terminal to 115200-N-8-1, no handshake.