====== Engineering Change for Rev0 CRC65 ======

This engineering change disconnects the 6502's SYNC signal to RC2014 pin 26 and connects CF chip select to RC2014 pin 26 instead.

{{https://www.retrobrewcomputers.org/lib/plugins/ckgedit/fckeditor/userfiles/image/builderpages/plasmo/crc65/crc65_rev0_ec.jpg?direct&600x393}}

Picture shows a cut (partly obscured by the jumper wire) right above RC2014 pin 26 and a jumper from CPLD to RC2014 pin 26.